will this floor jack be low enough?

PresidentEvil · 01-14-2022, 10:22 AM

My M2 is stock and I'd like to jack up using the front and rear central jacking points so I can put jack stands in each four corners.

Looking to use this: https://www.ecstuning.com/b-schwaben.../029121sch01a/

Will it reach?

///MPhatic · 01-14-2022, 10:42 AM

I can't answer your question, but I will say that I recently found these and purchased them, and they work perfectly for me to be able to jack the car from the center point in the front to add jack stands. They're pretty skinny, but work very well.

https://www.amazon.com/dp/B00UHLPES0...roduct_details

MR RIZK · 01-14-2022, 03:32 PM

Quote:

Originally Posted by PresidentEvil

My M2 is stock and I'd like to jack up using the front and rear central jacking points so I can put jack stands in each four corners.

Looking to use this: https://www.ecstuning.com/b-schwaben.../029121sch01a/

Will it reach?

Looks the same as my blue point one. If so it should clear as long as stock height and potentially no carbon lip.

For me I'm 20mm lowered with lip and does not clear as the jack point is deep and hits the back side of the jack. I use ramps similar to the other poster to aid with this.

oln08 · 01-14-2022, 09:10 PM

Quote:

Originally Posted by PresidentEvil

My M2 is stock and I'd like to jack up using the front and rear central jacking points so I can put jack stands in each four corners.

Looking to use this: https://www.ecstuning.com/b-schwaben.../029121sch01a/

Will it reach?

It may not reach. What I did before I bought a quickjack is lift the two front jackpoints with scissor jacks just high enough for the jack to slide in the middle. 2 Scissor jacks are cheaper than ramps and a lot smaller to keep and store.

PackPride85 · 01-15-2022, 05:06 PM

Quote:

Originally Posted by oln08

Quote:

Originally Posted by PresidentEvil

My M2 is stock and I'd like to jack up using the front and rear central jacking points so I can put jack stands in each four corners.

Looking to use this: https://www.ecstuning.com/b-schwaben.../029121sch01a/

Will it reach?

It may not reach. What I did before I bought a quickjack is lift the two front jackpoints with scissor jacks just high enough for the jack to slide in the middle. 2 Scissor jacks are cheaper than ramps and a lot smaller to keep and store.

Or two pieces of 2x4 wood

PresidentEvil · 01-15-2022, 06:04 PM

Quote:

Originally Posted by PackPride85

Or two pieces of 2x4 wood

yea that what im gonna do lol

01-14-2022, 10:22 AM	#1
PresidentEvil Private 43 Rep 63 Posts Drives: 2018 M2 LBB Join Date: Aug 2020 Location: Oregon iTrader: (0)	will this floor jack be low enough? My M2 is stock and I'd like to jack up using the front and rear central jacking points so I can put jack stands in each four corners. Looking to use this: https://www.ecstuning.com/b-schwaben.../029121sch01a/ Will it reach? __________________ 2018 M2 LCI Long Beach Blue Options: DCT, Carbon Fiber Winglets, M Performance Carbon Fiber Diffuser, M Performance Exhaust, Apple Car Play and those door lights that project the M logo on the ground when you open them lol
	Appreciate 0 Tweet Quote

01-14-2022, 10:42 AM	#2
///MPhatic The Seeker 13858 Rep 3,319 Posts Drives: OG M2 • Exige Join Date: Aug 2008 Location: USA iTrader: (2)	I can't answer your question, but I will say that I recently found these and purchased them, and they work perfectly for me to be able to jack the car from the center point in the front to add jack stands. They're pretty skinny, but work very well. https://www.amazon.com/dp/B00UHLPES0...roduct_details
	Appreciate 1 PresidentEvil42.50 Quote