BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
BMW M2 Forum > M2 Photos and Videos > Active Autowerke | M2 Build Documentation **Updated 7/13/16**

Closed Thread
 
Thread Tools Search this Thread
      04-22-2016, 02:33 PM   #67
David@ActiveAutowerke
BimmerPost Supporting Vendor
United_States
631
Rep
497
Posts


Drives: M2
Join Date: Jan 2016
Location: Miami, FL

iTrader: (0)

Quote:
Originally Posted by Icsunonove View Post
It is correct. Check it out here http://www.rimsntires.com/specspro.jsp

OEM front is ET29, so ET33 is 4mm plus 15mm as the tyre goes from 245 to 275. Wheel width does not matter because the tyre increase is wider than the wheel.

But as you said, most likely 19mm will not clear.
You are correct about the et29 offset. The et31 I remember is from the 1M.

However, the stock 245 is stretched on the 9" wheel. If anything protrudes past the outside it will be the rim protector portion of the tire. I don't think that the rim protector of the 275 on the 10" wheel will stick out further than the protector of the 245 on the 9" wheel.

If you are comparing tread widths, the top of the wheel will have a 30mm total difference, or 15mm per side. However the widest part will still be at the rim or the tire protector on the rim.

That said, after doing a quick search I found a thread where they tested the 18x10 et33 EC-7 with 275/35/18 on a F82 M4 and they cleared the suspension. Seeing as the M2 utilizes a lot of the same suspension components the et33 with 275 might actually work.
Appreciate 0
      04-22-2016, 02:44 PM   #68
David@ActiveAutowerke
BimmerPost Supporting Vendor
United_States
631
Rep
497
Posts


Drives: M2
Join Date: Jan 2016
Location: Miami, FL

iTrader: (0)

Quote:
Originally Posted by rwalker View Post
Difference from what?



I think it is, because the top nut is the same as used on all the F-series cars.

Will you post pics? I'm looking for the possibility that it's an off-center mount, like the ones on the M4 GTS...
The M4 mount has 3 holes for the large aluminum strut brace. The M2 doesn't use that brace, but instead has a single bar that connects the mount to the firewall, similar to those on the E9X chassis.

I can snap a couple pics tomorrow morning for you. But if you're referring to the position of the shaft in the the mount, I know for a fact that it is centered.
Appreciate 0
      04-22-2016, 02:51 PM   #69
rwalker
Major
United_States
277
Rep
1,082
Posts

Drives: the wheels off
Join Date: Nov 2006
Location: San Diego, CA

iTrader: (1)

Quote:
Originally Posted by David@ActiveAutowerke View Post
The M4 mount has 3 holes for the large aluminum strut brace. The M2 doesn't use that brace, but instead has a single bar that connects the mount to the firewall, similar to those on the E9X chassis.
Ok, makes sense. It's actually the same bracing as on all the other F3X and F2X cars, according to realoem.

Quote:
Originally Posted by David@ActiveAutowerke View Post
I can snap a couple pics tomorrow morning for you. But if you're referring to the position of the shaft in the the mount, I know for a fact that it is centered.
Understood. Please do snap those pics, it'd be greatly appreciated!
__________________
rwalker@rwalker.com (I really dislike Private Messaging)
Appreciate 0
      04-22-2016, 03:26 PM   #70
chris82
Brigadier General
chris82's Avatar
United_States
461
Rep
3,303
Posts

Drives: 128i
Join Date: Aug 2012
Location: NY NY

iTrader: (6)

Garage List
2008 BMW 128i  [5.00]
Can't wait to see what you guys do with it! but I'm hoping those Volks don't make it onto the final unit
Appreciate 1
      04-22-2016, 04:17 PM   #71
FSociety
2020 X3M/X4M Coming Soon
FSociety's Avatar
No_Country
2784
Rep
6,503
Posts

Drives: X4 M40i / F80 M3 ZCP
Join Date: Apr 2012
Location: NYC NJ CT PA FL

iTrader: (3)

Garage List
David@ActiveAutowerke can you confirm on closed-deck block ? S55 or N55 turbo ?
Same TMAP/MAP as M235 so the Active8 fitted no problem right ?
I saw the Dyno 337/398 on your testing with box on, only 7whp+ gain but a whooping 54wtq+ before broke-in looks promising!
What would be the equivalent of this on dynojet ? 330/344 Mustang Stock around 355-360whp/365-375wtq ?
__________________
F80 ZCP | bootmod3 | Pending: CTS Turbo DP/CP| Dragy #TuneOnly FullTank
60-130mph:
F80Paul E85 6.78s | HCP E60 7.3 | HCP E40 7.5 | E30 OTS 7.85s | STG1 93 9.1s | Stock 11.1
X4 M40i CTSTurbo DP/FMIC BM3 Stg2 93oct 4.1s 0-60 | 12.4@110mph 1/4m
Appreciate 0
      04-22-2016, 04:40 PM   #72
raysspl
Brigadier General
raysspl's Avatar
975
Rep
3,005
Posts

Drives: walking, bicycle, & bus
Join Date: Jan 2015
Location: thesocalrealestate.com

iTrader: (0)

Good gawd! Well done!
__________________
Appreciate 1
      04-22-2016, 07:06 PM   #73
F85MTuNED
Private First Class
F85MTuNED's Avatar
80
Rep
182
Posts

Drives: ///Ⓜ️
Join Date: Mar 2015
Location: NY / NJ

iTrader: (0)

Solid work
__________________
IM POOR..
Appreciate 0
      04-22-2016, 08:28 PM   #74
Joshhleee
///M Enthusiast
Joshhleee's Avatar
United_States
23
Rep
360
Posts

Drives: '12 F30, '15 x5 5.0, '15 M4,M5
Join Date: Oct 2012
Location: Los Angeles, California

iTrader: (0)

Nice. Can't wait!

-Josh
Appreciate 0
      04-22-2016, 09:12 PM   #75
David@ActiveAutowerke
BimmerPost Supporting Vendor
United_States
631
Rep
497
Posts


Drives: M2
Join Date: Jan 2016
Location: Miami, FL

iTrader: (0)

Quote:
Originally Posted by chris82 View Post
Can't wait to see what you guys do with it! but I'm hoping those Volks don't make it onto the final unit
Unforunately for us, but fortunately for you, the Volk offsets are too aggressive to work haha

Quote:
Originally Posted by ROBNYC View Post
David@ActiveAutowerke can you confirm on closed-deck block ? S55 or N55 turbo ?
Same TMAP/MAP as M235 so the Active8 fitted no problem right ?
I saw the Dyno 337/398 on your testing with box on, only 7whp+ gain but a whooping 54wtq+ before broke-in looks promising!
What would be the equivalent of this on dynojet ? 330/344 Mustang Stock around 355-360whp/365-375wtq ?
We did not tear open the engine but yes we were able to get our Active-8 unit to work. We had to create a custom base map but we got it to work. We were seeing abnormally high IATs when adding more boost in the higher RPMs but once we get the car back from Sebring we will spending more time on the dyno tuning.

Quote:
Originally Posted by raysspl View Post
Good gawd! Well done!
Quote:
Originally Posted by BOOSTINJAE View Post
Solid work
Quote:
Originally Posted by Joshhleee View Post
Nice. Can't wait!

-Josh
Thanks all!
Appreciate 2
      04-22-2016, 10:20 PM   #76
CanAutM3
Lieutenant General
CanAutM3's Avatar
Canada
8756
Rep
15,170
Posts

Drives: 2019 M4cs
Join Date: Jan 2012
Location: Montreal

iTrader: (0)

Garage List
2019 BMW M4cs  [0.00]
2018 Audi RS3  [0.00]
Loving the look with the EC-7s
__________________
2019 F82 M4cs
Lime Rock Grey
MPE / CF Mirror caps / MP-HAS / GC Camber plates
Appreciate 0
      04-22-2016, 11:45 PM   #77
OrangeCrush
Lieutenant Colonel
OrangeCrush's Avatar
1196
Rep
1,967
Posts

Drives: VO 1M #513/740
Join Date: May 2012
Location: USA

iTrader: (0)

Quote:
Originally Posted by CanAutM3 View Post
Loving the look with the EC-7s
Me too.

Someone needs to throw the 11" et44 on back with 305's!
__________________
Current
AW BMW M2
Past
VO BMW 1M
Appreciate 1
      04-23-2016, 12:04 AM   #78
OrangeCrush
Lieutenant Colonel
OrangeCrush's Avatar
1196
Rep
1,967
Posts

Drives: VO 1M #513/740
Join Date: May 2012
Location: USA

iTrader: (0)

Quote:
Originally Posted by M3 Adjuster View Post
DCT - Pay more to get less.

Tell friends you will save .02 seconds per shift while car actually has 10 less hp all the way around the course.
Quote:
Originally Posted by Robin_NL View Post
Agreed:
6MT=6800,- more expensive(CO2tax), DCT is standard in the Netherlands.....

I'd rather go Dutch

*Help me out OrangeCrush *

Cheers
Robin
LOL. So far I am loving the DCT. Shifts are super fast and sounds awesome when in sport + and when accelerating hard the shifts kind of give you a good jerk but in a smooth way. And I love the blips when down shifting. I mostly use the paddles and am having a blast. When I feel like relaxing I put it in drive mode (auto) so I can enjoy my line of coke or my cheeseburger American style.

I loved my 1M and before I took possession of the M2 I was worried that had I made a mistake on transmission choice but as of right now, I'm hooked and not really sure if I would go back or not, if given the choice, especially if they keep improving it.

BTW, the speed of the shifts would more than make up for a 10 HP difference.
__________________
Current
AW BMW M2
Past
VO BMW 1M
Appreciate 2
      04-25-2016, 12:48 PM   #79
chris82
Brigadier General
chris82's Avatar
United_States
461
Rep
3,303
Posts

Drives: 128i
Join Date: Aug 2012
Location: NY NY

iTrader: (6)

Garage List
2008 BMW 128i  [5.00]
Quote:
Originally Posted by David@ActiveAutowerke View Post
Unforunately for us, but fortunately for you, the Volk offsets are too aggressive to work haha
Appreciate 0
      04-25-2016, 01:19 PM   #80
Gato Grande
Private First Class
Gato Grande's Avatar
Mexico
69
Rep
131
Posts

Drives: 2017 M2
Join Date: Apr 2016
Location: NY!!!!!

iTrader: (0)

Quote:
Originally Posted by chris82
Quote:
Originally Posted by David@ActiveAutowerke View Post
Unforunately for us, but fortunately for you, the Volk offsets are too aggressive to work haha



Great. So you're only gonna run with 19s?
Great so
Appreciate 0
      04-25-2016, 01:21 PM   #81
Gato Grande
Private First Class
Gato Grande's Avatar
Mexico
69
Rep
131
Posts

Drives: 2017 M2
Join Date: Apr 2016
Location: NY!!!!!

iTrader: (0)

[quote=Gato Grande]
Quote:
Originally Posted by chris82
Quote:
Originally Posted by David@ActiveAutowerke View Post
Unforunately for us, but fortunately for you, the Volk offsets are too aggressive to work haha

Dropped. So you're only gonna run 19s?
Appreciate 0
      04-25-2016, 03:03 PM   #82
David@ActiveAutowerke
BimmerPost Supporting Vendor
United_States
631
Rep
497
Posts


Drives: M2
Join Date: Jan 2016
Location: Miami, FL

iTrader: (0)

[quote=Gato Grande;19821573]
Quote:
Originally Posted by Gato Grande
Dropped. So you're only gonna run 19s?
This weekend we will be running the car in bone stock configuration. With the stock 19s and all. Our goal is to just get a solid average lap time without any modifications.

We plan on running a set of square 18s the next time around though.
Appreciate 2
      04-25-2016, 06:14 PM   #83
Gato Grande
Private First Class
Gato Grande's Avatar
Mexico
69
Rep
131
Posts

Drives: 2017 M2
Join Date: Apr 2016
Location: NY!!!!!

iTrader: (0)

[quote=David@ActiveAutowerke;19822221]
Quote:
Originally Posted by Gato Grande View Post

This weekend we will be running the car in bone stock configuration. With the stock 19s and all. Our goal is to just get a solid average lap time without any modifications.

We plan on running a set of square 18s the next time around though.
can't wait………...
Appreciate 1
      04-26-2016, 06:08 PM   #84
FSociety
2020 X3M/X4M Coming Soon
FSociety's Avatar
No_Country
2784
Rep
6,503
Posts

Drives: X4 M40i / F80 M3 ZCP
Join Date: Apr 2012
Location: NYC NJ CT PA FL

iTrader: (3)

Garage List
Looking forward to more !
__________________
F80 ZCP | bootmod3 | Pending: CTS Turbo DP/CP| Dragy #TuneOnly FullTank
60-130mph:
F80Paul E85 6.78s | HCP E60 7.3 | HCP E40 7.5 | E30 OTS 7.85s | STG1 93 9.1s | Stock 11.1
X4 M40i CTSTurbo DP/FMIC BM3 Stg2 93oct 4.1s 0-60 | 12.4@110mph 1/4m
Appreciate 0
      05-04-2016, 01:50 PM   #85
David@ActiveAutowerke
BimmerPost Supporting Vendor
United_States
631
Rep
497
Posts


Drives: M2
Join Date: Jan 2016
Location: Miami, FL

iTrader: (0)

Hey all! Sorry for the lack of updates but we were busy at the track this past weekend!

We had the car at Sebring and to be honest I think it's the most fun stock car I've driven around the track. The crew from BC Racing also came out to shoot some video so within the next week or so they should have some great footage of the car putting down some laps.

All in all the weekend went great, and the only issue we ran in to was with the brakes. The stock pads clearly are not track pads, and were not sufficient enough to even finish the weekend. We're already working on a brake solution and should have some more information soon enough.

That said, here's a shot of our M2 next to my student's M235i! I was able to drive the M235i and the M2 back to back so I'll have some comparison notes to add in to the full review once we get the video back from BC Racing. Stay tuned!



For a sneak preview of one of our Sebring laps, check out the video on our Facebook! https://www.facebook.com/ActiveAutowerke/


Last edited by David@ActiveAutowerke; 05-04-2016 at 02:23 PM.
Appreciate 2
      05-04-2016, 02:45 PM   #86
TunedM2C
Brigadier General
TunedM2C's Avatar
No_Country
661
Rep
4,201
Posts

Drives: 2016 LBB M2
Join Date: Jan 2008
Location: Earth

iTrader: (2)

Have you ever driven a stock 1M around a track?
Appreciate 0
      05-04-2016, 03:05 PM   #87
LBBDrew
Lieutenant
297
Rep
506
Posts

Drives: 2017 LBB M2
Join Date: Feb 2016
Location: San Francisco

iTrader: (0)

Looking forward to the full write-up and more video footage. When you say the stock pads weren't sufficient, do you mean you wore through them already or just that they didn't provide enough stopping power? How many laps/hours did they last?
Appreciate 0
      05-04-2016, 03:51 PM   #88
David@ActiveAutowerke
BimmerPost Supporting Vendor
United_States
631
Rep
497
Posts


Drives: M2
Join Date: Jan 2016
Location: Miami, FL

iTrader: (0)

Quote:
Originally Posted by TunedM2 View Post
Have you ever driven a stock 1M around a track?
Unfortunately I haven't had the opportunity to.

Quote:
Originally Posted by LBBDrew View Post
Looking forward to the full write-up and more video footage. When you say the stock pads weren't sufficient, do you mean you wore through them already or just that they didn't provide enough stopping power? How many laps/hours did they last?
They felt great for about 4 laps. After that they start to fade to the point where I wasn't able to activate ABS at all and I'd get a long pedal. I also managed to kill the entire front pad set in about 25 laps.

We have some new race pads on order so we'll see how they do. I'm scheduled to be at Homestead Miami Raceway on the 14th.
Appreciate 0
Closed Thread

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -5. The time now is 04:56 PM.




m2
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST