10-14-2019, 08:16 AM | #2 |
Private
76
Rep 98
Posts |
I thought I was having the problem of only one valve working on my Remus exhaust, so I ended up getting a cgprecision controller to manually operate the valves. If you go down this route it connects at the 'Y' cable near bumper and not on top of the valves...
Also, even in different modes without the controller the valves will be open at idle, start-up and low RPMS. |
Appreciate
0
|
10-14-2019, 11:55 AM | #3 |
BimmerPost Supporting Vendor
24081
Rep 190,597
Posts |
If installed correctly, REMUS use the stock valves. They will function the same as they would on the stock exhaust.
If you want more control, we offer the VSC exhaust controller
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
10-14-2019, 01:59 PM | #4 | |
New Member
2
Rep 17
Posts |
Quote:
Can anyone offer any assistance on what I'm doing wrong, unfortunately as I purchased the exhaust 2nd hand I got no manual with it but I looked straight forward. The springs are Remus ones on the actuators the Y piece is brand new plugged in to both actuators and the car so I don't know what else could be stopping them from opening and closing, they are just always open.... Thanks in advanced |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|