03-23-2020, 12:58 PM | #1 |
Captain
784
Rep 763
Posts |
10.5 in et 35 with 295/30 tires?
Hey guys, interested in a wheel setup with specs
19x9.5 et 25 front 19x10.5 et 35 rear My understanding is I'll be able to run 265/30 tires in the front with a bit of camber. Question is will I be able to run a 295/30 in the rear? These are the same spec as the FI-R rears, but I can't seem to find anyone running those tires on an M2c. Planning on running either MP-C, KW V3, or Ohlins. Based on wheel/tire comparisons, this set up would be 0.4in closer to the suspension and 0.8in closer to the fender. Curious if that would end up working. Any feedback would be much appreciated. Thanks! |
Post Reply |
Bookmarks |
|
|