[///M TOWN]

Originally Posted by F87source

I was able to reach my entire arm in and unclip the pcv heater wiring harness.

But yes those pcv hose clips are very brittle, I believe a fuel hose connector remover tool or something similar would be key to easily removing it.

Figures

I am married to a German

German intuition with no explanation

Yeah that PCV replacement hose is $60 USD

[mike@x-ph.com]

Originally Posted by ZM2

Thanks for the hook up, Mike.

My pleasure

[Tes]

Originally Posted by ///M TOWN

Mine had a wiring harness, or some sort of a hose in the way, there's no way I could've done it any other way in my situation

Point taken though because those little tabs inside that sucker are very delicate

Good thing I snapped all of the tabs already installing my oil catch can XD Problem solved I guess

[///M TOWN]

Originally Posted by Tes

Good thing I snapped all of the tabs already installing my oil catch can XD Problem solved I guess

So you just capped it off ⁉️

What catch can did you install ⁉️

[F87source]

Originally Posted by ///M TOWN

So you just capped it off ⁉️

What catch can did you install ⁉️

Bms iirc but he had custom brackets.

No, it's not capped off it is connected to the oil catch can which connects back to the inlet.

[///M TOWN]

Originally Posted by F87source

Bms iirc but he had custom brackets.

No, it's not capped off it is connected to the oil catch can which connects back to the inlet.

Interesting I'd like to see the finished results

By the way thank you for recommending Super-Lube

Great product

[F87source]

Originally Posted by ///M TOWN

Interesting I'd like to see the finished results

By the way thank you for recommending Super-Lube

Great product

No problem, it's really damn good stuff best o-ring lube Ive ever used.

[///M TOWN]

Originally Posted by F87source

No problem, it's really damn good stuff best o-ring lube Ive ever used.

Agreed ‼️

[M2Pilot]

Originally Posted by mike@x-ph.com

We do

I was getting ready to use some XPH rewards but you guys are $80 higher than MSTs website?

Am I missing something?

https://www.mst-performance.com/products/bw-mk3352v2

https://x-ph.com/mst-bmw-n55-3-0-tur...e-bw-mk3352v2/

[///M TOWN]

Originally Posted by M2Pilot

I was getting ready to use some XPH rewards but you guys are $80 higher than MSTs website?

Am I missing something?

https://www.mst-performance.com/products/bw-mk3352v2

https://x-ph.com/mst-bmw-n55-3-0-tur...e-bw-mk3352v2/

Why don't you DM him

$200 price is a Euro price

$280 here in the United States

[mike@x-ph.com]

Originally Posted by M2Pilot

I was getting ready to use some XPH rewards but you guys are $80 higher than MSTs website?

Am I missing something?

https://www.mst-performance.com/products/bw-mk3352v2

https://x-ph.com/mst-bmw-n55-3-0-tur...e-bw-mk3352v2/

Originally Posted by ///M TOWN

Why don't you DM him

$200 price is a Euro price

$280 here in the United States

+1

\the price on MST is not for US customers , it says so on link you sent
* We have dealers in Hong Kong, Singapore, Malaysia, USA, we do not provide the shipping service to these locations. You may find the contact information on the dealer page.

[M2Pilot]

Originally Posted by mike@x-ph.com

+1

\the price on MST is not for US customers , it says so on link you sent
* We have dealers in Hong Kong, Singapore, Malaysia, USA, we do not provide the shipping service to these locations. You may find the contact information on the dealer page.

Awesome! Thanks for clarifying.

The "US$200" confused me, didn't realize it actually wasn't US $.

[///M TOWN]

Originally Posted by M2Pilot

Awesome! Thanks for clarifying.

The "US$200" confused me, didn't realize it actually wasn't US $.

I went through the same debacle

I couldn't complete my purchase

Until MST emailed me back explaining

I was just stoked I thought $200 what a fucking deal

Anyway it's still worth $280 all day any day

[AmuroRay]

Review?

[///M TOWN]

Originally Posted by AmuroRay

Review?

I am very very impressed with it so far

Really feels good spools up the turbo nicely

[AmuroRay]

Originally Posted by ///M TOWN

I am very very impressed with it so far

Really feels good spools up the turbo nicely

Stock tune? Other mods? I'm happy you're happy with it - It really helped liven up throttle response on my car.

[///M TOWN]

Originally Posted by AmuroRay

Stock tune? Other mods? I'm happy you're happy with it - It really helped liven up throttle response on my car.

Oh for sure man

Spool Baby Spool…

1) AFE Dry Drop-In Filter

2) BMS Charge Pipe

3) MST V2 Inlet

TurboSmart DV is next followed by the Burger Motorsports Front Intercooler

I'm currently running a stock tune w/ stock exhaust and the last Mod will be a Catted DownPipe

Warranty is up end of December then I will plan on adding a proper dyno based tune

[Tes]

Originally Posted by ///M TOWN

Interesting I'd like to see the finished results

By the way thank you for recommending Super-Lube

Great product

I attached some photos of the finished set up. The inlet side I used the BMS coupler but trimmed it shorter and jammed a smaller heater hose inside. On the outlet side I used a 45 degree expander and jammed the whole OEM connector inside, it is snug and doesn't leak or anything. The mounting is just aluminum flat bar from home depot that I cut and drilled. I can go on a 2 hour rant about BMS but long story short I contacted them via email before I bought it and they promised it fits (That their engineer "Jason" made it so it is a direct fitment plug and play) and it HELLA doesn't fit, it is straight up apparent they never even tried fitting the thing on a F87 M2. It is funny though that with my rants on the forum they actually updated their website in red that it doesn't fit the F87 M2 LOL. Anyway if I were to suggest a OCC it would be the Turner Motorsports one, their mounting is exactly where I ended up mounting mine, it is really the only option for our cars, I'm sure the turner one fitment will be A++ for the F87.

I'm looking forward to my MST V2 turbo inlet, I'm hoping to have a cleaner connection on the OCC outlet side, maybe I'll make something so it's just 1 uniform hose from the OCC to the turbo inlet pipe instead of the OEM one jammed inside a bigger hose LOL

[tenkies]

I got the Turner OCC and It sits just above the overflow tank. I did have to trim the Engine cover quite a bit so it didn't squish and rub on the hose going from the engine to the OCC. I haven't had a chance to take pictures because I forgot when I was installing but just wanted to mention the Turner OCC is not a perfect plug and play if you want to keep your engine cover on.

[Tes]

Originally Posted by tenkies

I got the Turner OCC and It sits just above the overflow tank. I did have to trim the Engine cover quite a bit so it didn't squish and rub on the hose going from the engine to the OCC. I haven't had a chance to take pictures because I forgot when I was installing but just wanted to mention the Turner OCC is not a perfect plug and play if you want to keep your engine cover on.

Good info! I might end up eventually ordering the Turner one down the road instead of my home depot random hoses set up mix n match extravaganza.

[tenkies]

Turner OCC pics

[LLB-M2]

Does V1 and V2 fit also stock turbo? I guess i never will upgrade turbo, but best offers in Germany are V1 and V2 versions of the MST inlet.
If they both fit, buy V1 or V2 (for stock turbo)?