[2017m2man]

Can anyone give me a list of EXACTLY what I need to make:

18x10+25 Volk TE37 saga s-plus fit my 2017 F87 M2 Non competition model.

Honestly dont wanna spend 3-4k on wheels then have them not fit.

[gphung]

Camber.

I'm running 18x10 +34 Sagas in the rear on 265/40 Hankook RS4s, and I could maybe slip a 5mm spacer in there if I wanted to (which I don't). Flush enough for me. I'm on -2.0 camber in the rear. At +25, you might rub depending on tire choice. But you can always dial in a tad more rear camber using the stock suspension components.

For fronts, you will definitely need more camber. I'm running 18x9 +23 on 245/40 RS4s, and when I initially fit them without camber plates and lowered on Ohlins, it was fairly close to flush already as well. With 10 + 25, you'd be about 12mm closer to the fenders than my front setup, and I'm pretty certain that won't work. Note, I eventually added camber plates, and currently at -2.8 degrees of front camber, I was able to fit a 15mm spacer and it's fairly flush again.

You will need camber plates up front, likely dialed to around the area of -2.5 degrees or so, depending on your tire setup. Note that if you're running aftermarket suspension that runs a larger diameter spring like Ohlins, you may have additional problems fitting 10" wheels up front.

This thread might be a bit more useful, just found it while I was replying:
https://f87.bimmerpost.com/forums/sh....php?t=1736774

[ebisu8]

Originally Posted by 2017m2man

Can anyone give me a list of EXACTLY what I need to make:

18x10+25 Volk TE37 saga s-plus fit my 2017 F87 M2 Non competition model.

Honestly dont wanna spend 3-4k on wheels then have them not fit.

Lots of variables like ride height, camber, tire size & brand and willingness to make anything work.

It has been done and tracked on by a few. Not to sway you out of your 18x10 et25 set but I will have a square 18x9.5 et22 square TE37SL set in Mag Blue up for sale once I take delivery. if you're interested let me know, I don't know what color of car you have but I thought I'd throw it out there.

[Yadadameans]

I have this same spec with my TE37 with 265/35 tires and coilovers with camber plates. It should fit right on without any issues if you have the regular M2 brakes. 18" Don't clear at all on M2c 2NH calipers.

[Dannywrld]

Originally Posted by ebisu8

Lots of variables like ride height, camber, tire size & brand and willingness to make anything work.

It has been done and tracked on by a few. Not to sway you out of your 18x10 et25 set but I will have a square 18x9.5 et22 square TE37SL set in Mag Blue up for sale once I take delivery. if you're interested let me know, I don't know what color of car you have but I thought I'd throw it out there.

How much are selling for and when will you get them?

[ebisu8]

Originally Posted by Dannywrld

How much are selling for and when will you get them?

Tried to PM you. Can you PM me?

[Dannywrld]

Originally Posted by ebisu8

Tried to PM you. Can you PM me?

Sorry I just joined I can't send or receive pm's but you can dm me on Instagram @dannys_m2