What did you do to your M2C today?

AUSf22 · 10-23-2020, 07:31 PM

Quote:

Originally Posted by GarageMadness

is the orange GTS wheel on sale anywhere?

I'm sure your local dealer could order the steering wheel in, whether its stocked in the US warehouses or ex Germany.
I checked and the part is not discontinued or superseded.

I'm in Australia so I can't confirm your stock levels for you as our dealer network is not shared.

Here is the M4 GTS Steering wheel P/N for you to quote up

P/N : 32-30-7-990-790 (Orange)

May as well leave the other P/N's here for others that may find it handy

M3 / M4 CS : 32-30-8-074-914 (Silver)
M2 CS : 32-30-8-746-879 (Red)

https://www.getbmwparts.com/oem-part...MtMGwtbDYtZ2Fz

NEfan508 · 10-23-2020, 07:36 PM

During a summer rain storm I had the great idea of parking under a big tree, 🎯 branch fell, hit the roof just near the crease preventing a good paintless dent removal fix

Option 1 traditional body shop paint/bondo but insurance will take care of it

Option 2 replace with a carbon fiber roof, Jazz up the shark fin and trim in gloss black

AW, gloss black and some carbon looks great

smknjoe · 10-23-2020, 07:56 PM

Bummer. You made the right choice though.

McChris · 10-23-2020, 08:55 PM

break in service completed. time to open her up

AUSf22 · 10-23-2020, 09:55 PM

Quote:

Originally Posted by McChris

break in service completed. time to open her up

Godammn I'm 500kms away from doing the break in service, then I can open her up

Micke_B · 10-24-2020, 02:49 AM

Pulled off the horrible plastic fender "extenders". Really do recommend to do this if you have a MY2021. There is PPF under the extenders but only on the fender part, not over the bumper. This means that the bumper will get scratched up pretty quickly. They also do collect a lot of dirt ..

I reinstalled all the screws when done and 3D-printed 3mm shims to make sure they did not bottom out and was fastened properly.

The massive dirt was on the rear extenders. Now I just need to clean the car before it goe to winter rest. But weather keeps being shit.

dtmurf · 10-24-2020, 11:10 AM

Quote:

Originally Posted by Micke_B

...and 3D-printed 3mm shims to make sure they did not bottom out and was fastened properly.

Nice attention to detail with the 3D printing!

Any issues with using the Quickjack on the Swisstrax floor?

Micke_B · 10-24-2020, 11:17 AM

Quote:

Originally Posted by dtmurf

Nice attention to detail with the 3D printing!

Any issues with using the Quickjack on the Swisstrax floor?

Thanks.

No problem at all. Had the Swisstrax and Quickjack for a year now and no issues not even marks on the floor

dtmurf · 10-24-2020, 11:24 AM

Quote:

Originally Posted by Micke_B

Thanks.

No problem at all. Had the Swisstrax and Quickjack for a year now and no issues not even marks on the floor

Thanks! Already have the Quickjack and I'm planning on redoing my garage next year so considering options for flooring and I'm liking the Swisstrax...except for the price!

GarageMadness · 10-24-2020, 12:31 PM

Quote:

Originally Posted by Micke_B

Pulled off the horrible plastic fender "extenders". Really do recommend to do this if you have a MY2021. There is PPF under the extenders but only on the fender part, not over the bumper. This means that the bumper will get scratched up pretty quickly. They also do collect a lot of dirt ..

I reinstalled all the screws when done and 3D-printed 3mm shims to make sure they did not bottom out and was fastened properly.

The massive dirt was on the rear extenders. Now I just need to clean the car before it goe to winter rest. But weather keeps being shit.

nicely done.

HMDriven.F87 · 10-24-2020, 02:43 PM

After a little over a month of having the car the pedals became an eye sore so I installed M Performance aluminum pedals.

M Performance Pedals install.

boss2k · 10-24-2020, 05:28 PM

Quote:

Originally Posted by flybigjet

For counterpoint, I really didn't like the stock M2C shifter. Too big and bulky.

I put the MP one from IND on and couldn't be happier with it-- it takes a day or three to get used to it, but once you settle in with it, you'll wonder why BMW didn't make it the stock knob. And as a bonus, it looks great.

I'll install the AS SSK and UCP with it in a week or two when the time.

I take my comments back, after driving 100 miles on the M performance shifter I like it and like the shorter knob feel , although I would really like a ball shaped cue knob which sits much lower just like this

Caggs · 10-24-2020, 06:16 PM

Fitted some frozen gold 763m wheels!

@m2c.caggs on insta

GarageMadness · 10-24-2020, 10:29 PM

M Performance Shift Knob install and detailed review.

https://www.bimmerpost.com/forums/sh...php?p=26837099

GarageMadness · 10-24-2020, 10:35 PM

Quote:

Originally Posted by HMDriven.F87

After a little over a month of having the car the pedals became an eye sore so I installed M Performance aluminum pedals.

M Performance Pedals install.

Great job. Thanks for sharing. The all weather mats look good.

BAN_M2C · 10-24-2020, 10:42 PM

Some fun at Palm Beach International Raceway this was the least wet session. Still was fun.

Also will be installing CS steering wheel likely tomorrow

GarageMadness · 10-24-2020, 10:52 PM

Nice Driving, especially all that heavy rain. how did stock tires hold up? BTW - what screen is that on the Navi showing the M logo?

BAN_M2C · 10-24-2020, 11:20 PM

Quote:

Originally Posted by GarageMadness

Nice Driving, especially all that heavy rain. how did stock tires hold up? BTW - what screen is that on the Navi showing the M logo?

Thanks, wasn't pushing really hard because of the rain but they were pretty good for a performance tire. This was on RE71R not the stock tires. The M is from the M Laptimer, was playing with it there for the first time.

HMDriven.F87 · 10-25-2020, 01:42 AM

Quote:

Originally Posted by GarageMadness

Quote:

Originally Posted by HMDriven.F87

After a little over a month of having the car the pedals became an eye sore so I installed M Performance aluminum pedals.

M Performance Pedals install.

Great job. Thanks for sharing. The all weather mats look good.

Definitely! With winter coming and things starting to get wet here the all weather mats are definitely keeping things cleaner!

KPM2C · 10-25-2020, 03:44 AM

Switched to winter setup with my youngest... 641M set

cncmastr · 10-25-2020, 06:39 AM

Quote:

Originally Posted by speedsnice

Installed Mishimoto chargepipes, they fit perfect with the stock air boxes. No rubbing on the air boxes or engine cover.

How was the install process?

NathObeaN · 10-25-2020, 07:53 AM

Quote:

Originally Posted by Micke_B

Pulled off the horrible plastic fender "extenders". Really do recommend to do this if you have a MY2021. There is PPF under the extenders but only on the fender part, not over the bumper. This means that the bumper will get scratched up pretty quickly. They also do collect a lot of dirt ..

I reinstalled all the screws when done and 3D-printed 3mm shims to make sure they did not bottom out and was fastened properly.

The massive dirt was on the rear extenders. Now I just need to clean the car before it goe to winter rest. But weather keeps being shit.

Did the same. Definitely a good improvement but my goodness was the PPF a nightmare to get off. I spent several hours using special "sticky stuff remover" and screwed up my fingers in the process. Worth it in the end though

10-23-2020, 07:36 PM	#3038
NEfan508 Lieutenant 2659 Rep 448 Posts Drives: 2019 M2C Join Date: Jan 2019 Location: Massachusetts iTrader: (0)	During a summer rain storm I had the great idea of parking under a big tree, 🎯 branch fell, hit the roof just near the crease preventing a good paintless dent removal fix Option 1 traditional body shop paint/bondo but insurance will take care of it Option 2 replace with a carbon fiber roof, Jazz up the shark fin and trim in gloss black AW, gloss black and some carbon looks great Attached Images
	Appreciate 11 smknjoe234.00 GarageMadness665.50 AUSf222689.50 ChrisK4449.00 dtmurf480.00 mcvaughan704.00 speedsnice1198.50 SilverScotty320.00 TrentMeister2860.00 GPGP226.50 FractalFootwork142.50 Quote

10-23-2020, 07:56 PM	#3039
smknjoe First Lieutenant 234 Rep 330 Posts Drives: 2020 M2C, 2018 GTI, 2007 Rabbi Join Date: May 2019 Location: Houston iTrader: (0)	Bummer. You made the right choice though.
	Appreciate 0 Quote

10-23-2020, 08:55 PM	#3040
McChris Second Lieutenant 192 Rep 240 Posts Drives: 21 M2C 6MT Join Date: Mar 2010 Location: PA iTrader: (3)	break in service completed. time to open her up
	Appreciate 0 Quote

10-24-2020, 02:49 AM	#3042
Micke_B Private 50 Rep 59 Posts Drives: M2 Competition Join Date: Jul 2018 Location: Sweden iTrader: (0)	Pulled off the horrible plastic fender "extenders". Really do recommend to do this if you have a MY2021. There is PPF under the extenders but only on the fender part, not over the bumper. This means that the bumper will get scratched up pretty quickly. They also do collect a lot of dirt .. I reinstalled all the screws when done and 3D-printed 3mm shims to make sure they did not bottom out and was fastened properly. The massive dirt was on the rear extenders. Now I just need to clean the car before it goe to winter rest. But weather keeps being shit. Attached Images
	Appreciate 3 dtmurf480.00 NEfan5082658.50 P111567.50 Quote

10-24-2020, 02:43 PM	#3047
HMDriven.F87 Private First Class 368 Rep 158 Posts Drives: 2021 BMW M2 Competition Join Date: Sep 2020 Location: Germany iTrader: (0)	After a little over a month of having the car the pedals became an eye sore so I installed M Performance aluminum pedals. M Performance Pedals install. __________________ Garage: 2023 M3 Competition xDrive 2022 X7 xDrive 40i M Sport 2021 M2 Competition (sold)
	Appreciate 6 mcvaughan704.00 boss2k1075.00 HazChem262.00 GarageMadness665.50 APH45.00 Artislife903.00 Quote

10-24-2020, 06:16 PM	#3049
Caggs Lieutenant 146 Rep 407 Posts Drives: M2 Competition Join Date: Feb 2013 Location: Collegeville, PA iTrader: (5)	Fitted some frozen gold 763m wheels! @m2c.caggs on insta Attached Images __________________ Josh Caggs / @M2C.Caggs on Instagram BSM M2Competition / MPerformance Coilover Kit Akrapovik Full Exhaust System (Mid & Rear) BBS FI-R Platinum Gloss w/ Michelin Cup2s Eventuri Carbon Fibber Intake
	Appreciate 10 Poochie9104.50 ///AVM2529.50 NEfan5082658.50 SilverScotty320.00 Fuji550i389.50 beanfritter34.50 GarageMadness665.50 Sarg33554.50 hAxel91.00 P111567.50 Quote

10-24-2020, 10:29 PM	#3050
GarageMadness MDM = Must Drive More 666 Rep 479 Posts Drives: 2021 M2 Competition Join Date: Oct 2020 Location: Arizona iTrader: (0)	M Performance Shift Knob install and detailed review. https://www.bimmerpost.com/forums/sh...php?p=26837099 __________________ '21 M2 Comp Sunset Orange \| MT \| Exec Pkg
	Appreciate 0 Quote

10-24-2020, 10:42 PM	#3052
BAN_M2C Brigadier General 4180 Rep 3,076 Posts Drives: 991.2 Porsche GT3, BMW E46 M3 Join Date: Jul 2016 Location: Sunshine State iTrader: (5) Garage List 1987 BMW 325is [10.00] 2004 BMW X3 [6.50] 2018 Porsche 911 GT3 [10.00] 1974 BMW 2002tii [10.00] 2004 BMW M3 [10.00]	Some fun at Palm Beach International Raceway this was the least wet session. Still was fun. Also will be installing CS steering wheel likely tomorrow Attached Images __________________ Follow me on IG Garage: 2018 991.2 GT3\|2013 135i\|2004 M3\|2004 X3\|1987 325is\|1987 325i\|1974 2002tii
	Appreciate 2 GarageMadness665.50 mcvaughan704.00 Quote

10-24-2020, 10:52 PM	#3053
GarageMadness MDM = Must Drive More 666 Rep 479 Posts Drives: 2021 M2 Competition Join Date: Oct 2020 Location: Arizona iTrader: (0)	Nice Driving, especially all that heavy rain. how did stock tires hold up? BTW - what screen is that on the Navi showing the M logo? __________________ '21 M2 Comp Sunset Orange \| MT \| Exec Pkg
	Appreciate 1 BAN_M2C4180.00 Quote

10-25-2020, 03:44 AM	#3056
KPM2C Private First Class 140 Rep 103 Posts Drives: BMW M2 Competitition Join Date: Aug 2020 Location: Belgium iTrader: (0)	Switched to winter setup with my youngest... 641M set Attached Images
	Appreciate 8 Caggs146.00 rwemersonrw535.00 Black Flagged471.50 BAN_M2C4180.00 GarageMadness665.50 Fuji550i389.50 Poochie9104.50 P111567.50 Quote