[3t3p]

Originally Posted by beppeM3+123d

If you buy used you have to erase eeprom desoldering it. If new go straight to the following simple coding procedure:

Connect to car, read fa ,inject cafd, code the kombi with oem fa of the car.

Adjust local time

Enjoy it!

That's interesting. I'm pretty good at soldering. I don't need to do it but is it hard to access the eeprom to do this?

[beppeM3+123d]

Originally Posted by 3t3p

That's interesting. I'm pretty good at soldering. I don't need to do it but is it hard to access the eeprom to do this?

Need to be opened also removing needle

[stardustin86]

Originally Posted by AndrewC1989

IND-Distribution just made a vid as well

This is so useful, thank you! Where can I go to to get the coding done?

[AndrewC1989]

Originally Posted by stardustin86

This is so useful, thank you! Where can I go to to get the coding done?

I used bimmertech's remote coding services but any local or forum coder should be able to do it for you, either remotely or in person.

[3t3p]

Originally Posted by AndrewC1989

I used bimmertech's remote coding services but any local or forum coder should be able to do it for you, either remotely or in person.

Didn't know bimmertech did remote coding?

[AndrewC1989]

Originally Posted by 3t3p

Didn't know bimmertech did remote coding?

https://www.bimmer-tech.net/page-Remote-Session

[Matt Devo]

looks like the US/MPH part has been updated/superseded, Schmiedman lists the new part as 62-10-7-883-057. $1250 seems to be the going rate unfortunately, unless someone has better Googling skills...

[AndrewC1989]

Originally Posted by Matt Devo

looks like the US/MPH part has been updated/superseded, Schmiedman lists the new part as 62-10-7-883-057. $1250 seems to be the going rate unfortunately, unless someone has better Googling skills...

Unfortunately that seems to be the normal price now, perhaps due to parts shortages and the delayed after-effects of covid. I bought mine from getbmwparts in 2018 and it was only $960.

[AbnormallyAspirated]

Originally Posted by AndrewC1989

The Pre-Lci cluster has an oil/coolant combo gauge with no numbers



LCI cluster has oil temp only but has numbers

can anyone confirm that all F22/F23 with this level Kombi has the pre-lci IC have temp screen? I'm thinking of upgrading from my basic combi to the mid combi (pre-LCI), but only want to do it if it will gain me the temperature gauge.

[AndrewC1989]

Originally Posted by AbnormallyAspirated

can anyone confirm that all F22/F23 with this level Kombi has the pre-lci IC have temp screen? I'm thinking of upgrading from my basic combi to the mid combi (pre-LCI), but only want to do it if it will gain me the temperature gauge.

This is the F87 forum so it's less likely anyone here would know, especially since all US spec M2s have a temp gauge in the cluster. You'd probably find more/better answers on the 2 addicts section.

[HootisTigglebits]

Is the only hardware needed to virginize and change the vin on a 6wa
• R270 EEPROM Programmer
• SOIC 8 Pin Testclip compatible with the R270

What software is needed?