[Fugly M3]

Originally Posted by Karmic Man

AC Schnitzer

Tips are around 90mm

Can you see the stock pipes inside these or is there a double wall?

[aftercorbu]

Originally Posted by F8SEVEN

Can you see the stock pipes inside these or is there a double wall?

Not sure if you are looking for a particular brand or not. I went with MODE because angle and double wall. Pretty much an OEM+ look.

[Fugly M3]

Originally Posted by aftercorbu

Not sure if you are looking for a particular brand or not. I went with MODE because angle and double wall. Pretty much an OEM+ look.

Thanks. They look good, but I specifically don't want them because I don't like that they are 98MM...I want something at 90MM where they aren't basically all but touching each other.

[M2_MEDUSA]

Originally Posted by Karmic Man

AC Schnitzer

Tips are around 90mm

Gonna be hard to find diffusers that fit 90mm tips I think.

[M2_MEDUSA]

Originally Posted by PASE624

Hey, I don't know if my post will help but this is what I bought and it fit PERFECT with my stock M2C exhaust. as long as you get 70MM inlet, youre set.

https://www.ebay.com/itm/70MM-Glossy...72.m2749.l2649

Thanks for the post. I went ahead and ordered a set for myself. But I have 1 question. Is stock M2C tips 70mm?? I did the conversion and stock tips are exactly 1.4mm short of what was originally posted as conversion from 2.7 inches puts it at 68.xx mm. I thought stock tips were 70mm. If so I don't believe 1-1.5mm is a large concern as the tips I ordered are 70mm. I'll probably be okay but looking for clarification.

[ESB]

Originally Posted by aftercorbu

Not sure if you are looking for a particular brand or not. I went with MODE because angle and double wall. Pretty much an OEM+ look.

What does double wall mean? Does it prevent this from happening (where you can see one tip inside the after market one)

[ESB]

Originally Posted by ESB

What does double wall mean? Does it prevent this from happening (where you can see one tip inside the after market one)

Facepalm. The question you replied to I think answers mine.

It's basically 3am. Idk why I'm awake. Bye

[aftercorbu]

Originally Posted by ESB

Facepalm. The question you replied to I think answers mine.

It's basically 3am. Idk why I'm awake. Bye

No worries. We all do it...

[ESB]

Originally Posted by F8SEVEN

Thanks. They look good, but I specifically don't want them because I don't like that they are 98MM...I want something at 90MM where they aren't basically all but touching each other.

Did you land on something?

I think I also would prefer 90MM and was about to pull the trigger on the Active ones until I saw what I pasted above from a YouTube video. That's an ugly look imo :\

[Fugly M3]

Originally Posted by ESB

Did you land on something?

I think I also would prefer 90MM and was about to pull the trigger on the Active ones until I saw what I pasted above from a YouTube video. That's an ugly look imo :\

I'm probably going to go with the M carbon ones designed for the stock exhaust and splurge on a diffuser while I'm at it. They aren't my favorite and I hate to spend the money, but I can get most of it back when I take them off.

[ChrisK]

I posted some of this photos in another thread...

The fit and finish of these tips are top notch! Plenty of room between the tips and CF diffuser. This is how the car should have been stock.

97mm OD, 70mm ID

Tips are here: https://www.ebay.com/itm/203185400540

[Swugs]

They look sweet, I am tempted.

[Zuzu]

Originally Posted by ChrisK

I posted some of this photos in another thread...

The fit and finish of these tips are top notch! Plenty of room between the tips and CF diffuser. This is how the car should have been stock.

97mm OD, 70mm ID

Tips are here: https://www.ebay.com/itm/203185400540

Totally agree mate.. have the same tips and definitely the goods, when it comes to aesthetics..

[MooMooM2]

I also have the same tips and I agree they are very nice, well built, nice finish. There is a tiny bit of rainbow when the light hits which I wish was not there (the og does not that this) but its very very slight and just nit pick. Its a great look upgrade for less than $200 that helps the back end of the car (the stock tips are just too small, I don't think they should have come this big from factory but they should have been bigger).


Also thanks to @Chrisk for posting about these, that is how I found out about em.

Right side is new, left is old

[Lbsigman]

Originally Posted by ChrisK

I posted some of this photos in another thread...

The fit and finish of these tips are top notch! Plenty of room between the tips and CF diffuser. This is how the car should have been stock.

97mm OD, 70mm ID

Tips are here: https://www.ebay.com/itm/203185400540

I went with these tips as well. They went on without a problem and they look amazing.

Side by side comparison.


After

[esoj37]

Originally Posted by Zuzu

Totally agree mate.. have the same tips and definitely the goods, when it comes to aesthetics..

Hey bro, what paint did ya use to paint the muffler?

[Zuzu]

Originally Posted by esoj37

Hey bro, what paint did ya use to paint the muffler?

Here you go mate.

[esoj37]

Originally Posted by Zuzu

Here you go mate.

Thank you!

[Zuzu]

Originally Posted by esoj37

Thank you!

Painted pix.

[DVM2NJ]

Hi - I got a 2018 M2 and want to upgrade the tips. Will these fit?

[Economatic]

Originally Posted by ChrisK

I posted some of this photos in another thread...

The fit and finish of these tips are top notch! Plenty of room between the tips and CF diffuser. This is how the car should have been stock.

97mm OD, 70mm ID

Tips are here: https://www.ebay.com/itm/203185400540

Thanks for posting this. I ordered these a few weeks ago and finally put them on tonight. They look great. Our M2C's should have had these tips from the factory.

[ChrisK]

Originally Posted by Economatic

Thanks for posting this. I ordered these a few weeks ago and finally put them on tonight. They look great. Our M2C's should have had these tips from the factory.

My pleasure. They are holding up very very well.