01-14-2023, 08:48 PM | #1 |
Enlisted Member
11
Rep 31
Posts
Drives: M2Comp6MT, B9 S4
Join Date: Dec 2022
Location: Chicago
|
lol shoot me
Was taking out bms clutch stop and for some reason I was having a hard time. Finally got it, ( or I thought) but turned out the screw snapped in half and the other half is stuck in it.
|
01-14-2023, 08:52 PM | #2 |
Colonel
2275
Rep 2,523
Posts |
I know your pain…
__________________
?16 M2 Long Beach Blue/Black, 6MT
'22 X5 4.0 M Sport Black Sapphire/Tartufo ?22 Tesla Model Y Performance Midnight Silver/White |
Appreciate
0
|
01-15-2023, 11:09 AM | #5 |
Second Lieutenant
139
Rep 241
Posts |
happened to me as well and i drilled out with small bit and then installed a new one.
|
Appreciate
0
|
02-01-2023, 01:01 PM | #6 |
Major General
1545
Rep 8,970
Posts |
It's not a screw!
It's just push in / pull out with barbs not a thread. Use the pedal to push it home and snipe nose pliers like a fork to lever it out gently.. Not suprised it snapped off if you rotated it Last edited by doughboy; 02-01-2023 at 01:08 PM.. |
Appreciate
0
|
03-05-2023, 11:48 AM | #8 |
Brigadier General
4560
Rep 4,672
Posts |
I had to cut mine to get it out when adding the UCP version. Get a Philips screwdriver or a punch and just knock through the remaining piece with a mallet
|
Appreciate
1
WeekendWarriorz670.00 |
Post Reply |
Bookmarks |
|
|