BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
M2 Technical Topics > S55 Engine / Drivetrain / Exhaust / Bolt-ons / Tuning > bootmod3: Rolling ANTILAG (DEMO) - Advanced End User/Tuning Features (Part 3)

Post Reply
 
Thread Tools Search this Thread
      10-29-2020, 01:06 PM   #1
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
4484
Rep
1,862
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

bootmod3: Rolling ANTILAG (DEMO) - Advanced End User/Tuning Features (Part 3)

In the previous video we demonstrated bootmod3's on-the-fly map switching using steering wheel controls allowing users to flash the car once and then select between any 4 maps that can be custom tuned to suit your modifications, octane and racing needs:

https://f80.bimmerpost.com/forums/sh....php?t=1768838

In today's demo video we're showing another new tuning feature that is in the works by the bootmod3 dev team called ANTILAG. To trigger it you simple press UP and hold on the cruise button on the left side of the steering wheel. While holding it, the DME switches to an internal antilag tuning strategy and tables where antilag RPM, ignition timing, accelerator pedal threshold, target load/boost and other values can be configured to dial it in as needed.

In this demo, vehicle is a 2015 BMW F80 M3, RPM is set to around 4k rpm, with accel pedal threshold at 100% (driver needs to go WOT to trigger it). In 1-2 seconds after triggering it, this car running ASR Kratos turbos, is able to hit 30psi! Turbo lag goodbye!

We've added logic to ensure pressing the button UP on its own does not trigger ANTILAG mode until pedal and RPM thresholds are reached (both of which are tunable in the map). In addition, any of the 4 on-the-fly switchable maps can be set to have antilag enabled or disabled so the user can configure it to their needs (e.g. map1 no antilag, but map4 all the antilag/boost, etc.)

bootmod3's rolling antilag feature is end user configurable from the app on-demand so any of its parameters can be altered on-demand while driving without turning the engine off and reflashing.

All the advanced tuning features such as map switching, antilag, flex fuel, are in progress of being ported as many if not all vehicles currently supported by bootmod3.

Hope you enjoy this video!

Appreciate 2
      10-30-2020, 09:18 AM   #2
mike@x-ph.com
BimmerPost Supporting Vendor
mike@x-ph.com's Avatar
United_States
23784
Rep
190,103
Posts


Drives: 07-335/12-328/18-M4/21-M4CP
Join Date: Sep 2013
Location: Las Vegas

iTrader: (23)

__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/

Phone number 702-494-9435
Appreciate 0
      10-30-2020, 10:09 AM   #3
infinitekidM2C
Major General
infinitekidM2C's Avatar
United_States
4186
Rep
5,727
Posts

Drives: 2019 M2 Competition
Join Date: Nov 2007
Location: Orange County, CA

iTrader: (4)

Garage List
Do you have to re-trigger it for each run or does it stay triggered until you untrigger or shut off? Sounds similar to an launch-control kind of feature.
Appreciate 0
Post Reply

Bookmarks

Tags
bm3, bootmod3, flex fuel, map switching, rolling antilag

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:50 AM.




m2
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST