[Expert@ApexWheels]

We have 3 sets of wheels and tires at our Pleasanton office for sale. These are APEX wheels that were used for photoshoots or in the case of one set a few track days.

If you are interested in any of these sets, please look for ordering instructions below.

The Details:

Wheels and tires:

Satin Black FL-5 18x9.5 ET22 square + 265/35-18 MPS4S used tires with good tread(2020 date codes): -SOLD-


Anthracite SM-10 19x9 ET30 19x10 ET25 staggered with 245/35-19 & 275/30-19 MPS4S new tires (2017/18 date codes): -SOLD-


Polished EC-7R 18x10.5 ET22 square with 275/35-18 R888R new tires (2018 date code): $3,300.00






Last image is a different set but identical fitment and tires.

Location:
Our office can be found at:

1061 Serpentine Ln Ste C
Pleasanton, CA 94566

This office is closed during normal business hours currently and these sales will only be conducted via pre-arranged appointments. These sets will be sold as cash-only with no warranty or replacement program coverage. They are personal sets of APEX’s owner. Please reach out to us if you are interested in these wheels via the method listed below.

If you are interested in any of these sets, do not reply to this thread, DM us on the forums, or call our main line. Please email experts@apexraceparts.com with the following text in the email subject:

Local Pickup: Wheel and Tire set

Please include the details of which set you are interested in as well as your phone number in the email body.

These wheels and tires are being sold as sets of 4 via local pickup only. We cannot ship these wheels and we do not have alternate sets or fitments for sale at our Pleasanton office.

If you have any general questions about these sets, feel free to post in the thread. We will keep the OP updated as the sets sell and do our best to remove sets that are no longer available.

-Tom

[Expert@ApexWheels]

2 sets sold, OP updated.

[WedgeSalad]

Originally Posted by Expert@ApexRaceParts

2 sets sold, OP updated.

What is needed to mount these camber and spacer wise?

[Expert@ApexWheels]

Originally Posted by WedgeSalad

What is needed to mount these camber and spacer wise?

The remaining set would require a ton of mods to work on an M2, especially in the rear. I may pull this page off the M2 forums as this final set will not be an easy fit without wider rear fenders because of the low offset. camber between -3.5 to -4° up front and suspension with better inner clearance at a minimum for rub-free fitment with most track tires.

-Tom

[WedgeSalad]

Originally Posted by Expert@ApexRaceParts

The remaining set would require a ton of mods to work on an M2, especially in the rear. I may pull this page off the M2 forums as this final set will not be an easy fit without wider rear fenders because of the low offset. camber between -3.5 to -4° up front and suspension with better inner clearance at a minimum for rub-free fitment with most track tires.

-Tom

Okay that was my inkling. I appreciate the reply.