[carchrism5]

I am interested in a set of Superspeed wheels (https://www.super-speed.ca/flowform-rf05rr), they even have M2 specific fitments (https://www.super-speed.ca/post/rf05...-fitment-guide).

I'm curious if anyone else has looked into these. The design is simple, weight is good and frankly I'm a little surprised more people are not running them. Perhaps I'm missing something.

[tropicatango]

They are ok but the rear with 10.5 wide and et 35 offset is a specific f80 m3 specs, not m2 so you'll be able to run 265/35/19 rear.... maybe 275/35/19 but wider than than rubbing possibilities is high

[carchrism5]

Originally Posted by tropicatango

They are ok but the rear with 10.5 wide and et 35 offset is a specific f80 m3 specs, not m2 so you'll be able to run 265/35/19 rear.... maybe 275/35/19 but wider than than rubbing possibilities is high

Thanks for pointing that out, interesting that their website posts "M2 Specific Fitment" in an article yet uses more common F8X fitment and no pictures of them on an F8X. I figured in part it was to them not having an US distributors but likely a mix of the two. Really hoping someone who has these will chime in to the quality and pictures of fitment.

[bkd705]

I'm running these in 18" and know a few others as well that use them for winter and/or track usage. Fitment is good, I'm 18x9.5 et25 all around.

I know a few running 19s on comps, and I believe they're 19x9.5 et25 all around as well, running 265/30 I believe. Will link their insta's below, I can add pics of 18s if you're interested.

https://www.instagram.com/euro_m2c/ (19x9.5 et25 w/ 265/30 R888R, I believe there may be a spacer to clear his Ohlins, but I forget, it'd be small if there is)
https://www.instagram.com/m2c.f87/ (19x9.5 et25 w/ conti viking contact winters, idk size)

[carchrism5]

Thanks bkd705 I sent you a PM as well.

[bkd705]

Originally Posted by carchrism5

Thanks bkd705 I sent you a PM as well.

Hey, looks like your PMs are full, can't reply. Slide in my DMs on insta (just followed you @bkd705).

[rjpiston]

I'll be installing these exact wheels on my m2c in a couple weeks

Front: 19x9.5" ET28 with 265/30-19 tires
Rear: 19x10.5" ET45 with 295/30-19 tires

Also installing eibach pro kit springs with 10mm spacers. Will report on fitment once it's all installed.

[tropicatango]

Originally Posted by rjpiston

I'll be installing these exact wheels on my m2c in a couple weeks

Front: 19x9.5" ET28 with 265/30-19 tires
Rear: 19x10.5" ET45 with 295/30-19 tires

Also installing eibach pro kit springs with 10mm spacers. Will report on fitment once it's all installed.

Are you sure ?

The wheels specs you wrote are not available with superspeed wheels

[rjpiston]

Originally Posted by tropicatango

Are you sure ?

The wheels specs you wrote are not available with superspeed wheels

I am wrong. Thank you. I'll have to double check. The rears are most likely the +35 offset since it's the only 10.5", but they have four offsets at 9.5".

[VisualEcho]

Too bad about that old-school clamp-on weight lip, they're a great price and look good too.

[21M2]

So correct me if I'm wrong but if the rear is a 35et why not just add spacers to the rear?

[tropicatango]

Originally Posted by 21M2

So correct me if I'm wrong but if the rear is a 35et why not just add spacers to the rear?

Adding spacer lower the offset

If you have a wheel with offset 35, if you add a 10mm spacer, the final results is offset 25

10.5 wide with 35 offset work on m2, but only with 265, wider tires on the wheels specs is rubbing

[21M2]

Originally Posted by tropicatango

Adding spacer lower the offset

If you have a wheel with offset 35, if you add a 10mm spacer, the final results is offset 25

10.5 wide with 35 offset work on m2, but only with 265, wider tires on the wheels specs is rubbing

Got It! I thought it was the other way around.