M2 tail pipes.

4seriesNL · 03-04-2019, 07:27 PM

Can someone please tell me the distance between the tail pipes for the M2?
Also, the with of the two tips.

Thanks

m2for2 · 03-04-2019, 07:57 PM

Quote:

Originally Posted by 709M240i

Can someone please tell me the distance between the tail pipes for the M2?
Also, the with of the two tips.

Thanks

Did you mean to say the width of the tips? If so, I'd also be interested in knowing.

4seriesNL · 03-04-2019, 08:42 PM

Quote:

Originally Posted by m2for2

Quote:

Originally Posted by 709M240i

Can someone please tell me the distance between the tail pipes for the M2?
Also, the with of the two tips.

Thanks

Did you mean to say the width of the tips? If so, I'd also be interested in knowing.

Distance between the two inner tips on the left and right

CTSean · 03-05-2019, 08:40 AM

Hopefully this is clear. These measurements aren't perfect but they are pretty close (for example- tip diameter is closer to 3 3/16"). You should be able to derive any other measurement you want with this data.

Edit - I fixed the center-to-center from 4 1/4" to 4ish . It's too hard to get an accurate measurement because they are offset.

4seriesNL · 03-05-2019, 04:31 PM

Quote:

Originally Posted by CTSean

Hopefully this is clear. These measurements aren't perfect but they are pretty close (for example- tip diameter is closer to 3 3/16"). You should be able to derive any other measurement you want with this data.

Edit - I fixed the center-to-center from 4 1/4" to 4ish . It's too hard to get an accurate measurement because they are offset.

Beautiful! Exactly what I was looking for

qnet · 03-05-2019, 05:09 PM

Quote:

Originally Posted by 709M240i

Beautiful! Exactly what I was looking for

Out of curiosity, are you trying to configure or cut you rear valance to accommodate the M2 quad exhaust for your M240i?

I had a M235i and this is something I had thought about doing. Either way, good luck with your project.

4seriesNL · 03-06-2019, 07:55 PM

Quote:

Originally Posted by qnet

Quote:

Originally Posted by 709M240i

Beautiful! Exactly what I was looking for

Out of curiosity, are you trying to configure or cut you rear valance to accommodate the M2 quad exhaust for your M240i?

I had a M235i and this is something I had thought about doing. Either way, good luck with your project.

Exactly what I was trying. I ordered a new diffuser (see below) but the cuts dont fit the M2 Exhaust. So I'll be going with a custom job

03-04-2019, 07:27 PM	#1
4seriesNL Private First Class 87 Rep 121 Posts Drives: 2017 BMW M240i Join Date: Jan 2018 Location: St. John's, Newfoundland iTrader: (0)	M2 tail pipes. Can someone please tell me the distance between the tail pipes for the M2? Also, the with of the two tips. Thanks __________________ Instagram: 709m240i
	Appreciate 0 Tweet Quote

03-05-2019, 08:40 AM	#4
CTSean First Lieutenant 323 Rep 392 Posts Drives: LCI BSM MT M2 Join Date: Dec 2018 Location: CT iTrader: (1)	Hopefully this is clear. These measurements aren't perfect but they are pretty close (for example- tip diameter is closer to 3 3/16"). You should be able to derive any other measurement you want with this data. Edit - I fixed the center-to-center from 4 1/4" to 4ish . It's too hard to get an accurate measurement because they are offset. Last edited by CTSean; 03-05-2019 at 12:15 PM..
	Appreciate 7 GeilesAuto15.00 kfscoll208.50 brianpdx21.00 4seriesNL86.50 nioh_lbbm21716.50 ddk632585.00 pz6193277.00 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search