MCS F80 (M2,M3,M4) 3-Way Coilovers

MR RIZK · 03-11-2023, 05:10 PM

Don't miss out on a rare chance to get your hands on a lightly used set of MCS 3 WAY coilovers designed specifically for the F80 platform.

These top-of-the-line coilovers from Motion Control Suspension (MCS) outshine other alternatives like Moton, JRZ, and AST. What's more, the rear dampers come optioned with dry breaks/quick disconnects, a $1,000 additional cost, allowing you to route the rear canister to different locations without the need for extensive bodywork modifications. Additionally the rear has been optioned with the lower spring cups to invert the damper to allow easy rebound adjustment without jacking the car or removing wheels. This setup fits perfectly without requiring any body modifications.

These coilovers are currently installed on my M2C, but I can quickly remove them post deposit/sale. They're suitable for M2, M3, and M4 and can be provided with or without springs and camber plates. The rear configuration is optioned as a coilover, unlike the OEM divorced setup.

Do your research and don't miss out on this fantastic opportunity!

NOTE: Image in Ad is near identical to my setup besides missing the rear quick disconnects and spring type. Photos to come or reach out if you have any questions via pm.

Detailed information can be found here:
https://www.motioncontrolsuspension....s-guide/3-way/
https://www.motioncontrolsuspension.com/buyers-guide/

At a high-level the specs are:

18 Clicks of High-Speed Compression Adjustment
10 Clicks of Low-Speed Compression Adjustment
18 Clicks of Rebound Adjustment
Gas Pressure of 100-275 psi

Setup has less than 10,000kms with supporting paperwork to substantiate this.

The setup costs over $15k depending on exchange rate and duties. Chasing $12.5k as essentially near new.

Inclusions:

Pair of Front 3W Dampers
Pair of Rear 3W Dampers
Rear Optioned with Dry Breaks + Lower Spring Cups
Pair of Front Step Bushes
Pair of Rear Upper Damper Mounts
Pair of Vorshlag Camber Plates
Swift Springs Front and Rear – 60mm
Swift Stainless and Delrin Thrust Sheets
Eibach Helper Springs Front and Rear
Spring Perch Adjustment Tool

03-11-2023, 05:10 PM	#1
MR RIZK Major 758 Rep 1,336 Posts Drives: AW M2C Join Date: Mar 2013 Location: Australia iTrader: (0)	MCS F80 (M2,M3,M4) 3-Way Coilovers Don't miss out on a rare chance to get your hands on a lightly used set of MCS 3 WAY coilovers designed specifically for the F80 platform. These top-of-the-line coilovers from Motion Control Suspension (MCS) outshine other alternatives like Moton, JRZ, and AST. What's more, the rear dampers come optioned with dry breaks/quick disconnects, a $1,000 additional cost, allowing you to route the rear canister to different locations without the need for extensive bodywork modifications. Additionally the rear has been optioned with the lower spring cups to invert the damper to allow easy rebound adjustment without jacking the car or removing wheels. This setup fits perfectly without requiring any body modifications. These coilovers are currently installed on my M2C, but I can quickly remove them post deposit/sale. They're suitable for M2, M3, and M4 and can be provided with or without springs and camber plates. The rear configuration is optioned as a coilover, unlike the OEM divorced setup. Do your research and don't miss out on this fantastic opportunity! NOTE: Image in Ad is near identical to my setup besides missing the rear quick disconnects and spring type. Photos to come or reach out if you have any questions via pm. Detailed information can be found here: https://www.motioncontrolsuspension....s-guide/3-way/ https://www.motioncontrolsuspension.com/buyers-guide/ At a high-level the specs are: 18 Clicks of High-Speed Compression Adjustment 10 Clicks of Low-Speed Compression Adjustment 18 Clicks of Rebound Adjustment Gas Pressure of 100-275 psi Setup has less than 10,000kms with supporting paperwork to substantiate this. The setup costs over $15k depending on exchange rate and duties. Chasing $12.5k as essentially near new. Inclusions: Pair of Front 3W Dampers Pair of Rear 3W Dampers Rear Optioned with Dry Breaks + Lower Spring Cups Pair of Front Step Bushes Pair of Rear Upper Damper Mounts Pair of Vorshlag Camber Plates Swift Springs Front and Rear – 60mm Swift Stainless and Delrin Thrust Sheets Eibach Helper Springs Front and Rear Spring Perch Adjustment Tool __________________ Previous Rides: 13' 135i, 08' 130i, 03' HKS Turbo'd 350z, Modded GC8 WRX, NA MX5
	Appreciate 0 Tweet Quote