[M2_AL]

Hey guys, I just picked up a set of Brixton forged wheels paired with Michelin PS4's. I want to do some suspension modifications and was wondering if anyone has lowered the ride height with this set up, if so which route did you go (coils or springs?), any other modifications to take note of such as camber plates. I'm looking to run a HAS kit thinking either KW or M performance. Below are the specs.

Front: 265/30/20
Rear: 295/30/20

[TargaM2]

I'm running 666M 20's on lowered suspension but with oem sizing ie 20 x 9 & 20 x 10 with 245/30/20 & 265/30/20.
I'd doubt youd be able to lower it with that increased sizing, I'm surprised it's not rubbing already tbh.
Nice rims btw.

[M2_AL]

Originally Posted by TargaM2

I'm running 666M 20's on lowered suspension but with oem sizing ie 20 x 9 & 20 x 10 with 245/30/20 & 265/30/20.
I'd doubt youd be able to lower it with that increased sizing, I'm surprised it's not rubbing already tbh.
Nice rims btw.

I do have some light rubbing on the front when going over harsh bumps but I think some slight camber would help.
I've seen people lowered running this size setup but never specified their setup

[TargaM2]

Originally Posted by M2_AL

I do have some light rubbing on the front when going over harsh bumps but I think some slight camber would help.
I've seen people lowered running this size setup but never specified their setup

I suspected as much. Best of luck with it but I only see it getting worse if you lower it.
No idea what width rims your running but I'd be downsizing to 255 & 275 Tyres if possible.
I get trying to push the boundaries in tyre size on track wheels (I do the same) but I see no benefit whatsoever in doing that for use on the road.