BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
Classifieds Section > Sponsors Classifieds > TC Kline Racing Camber Plates F87 M2

Post Reply
 
Thread Tools Search this Thread
      01-10-2017, 12:14 AM   #1
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Thumbs up TC Kline Racing Camber Plates F87 M2

The all new F87 M Series has completely re-designed front strut mounting design than any previous BMW.


The New TCKR F87 M2 Camber Plates are made with an anodized aluminum main plate, and stainless steel bearing housing, stress link mount and fasteners. This is not the cheapest way to make these parts, but TC Kline Racing in only interested in offering the best quality components possible.

The camber adjustment holes offer aprox.1 degree camber change for each position, from the center, (stock), to +2 additional degrees adjustment. There is no provision for caster adjustment because the stress bar mount interferes with that possibility.

These camber plates are designed to work with TC Kline Racing coil-over suspension, stock suspension use OEM or Sport type springs(OEM thrust bearing must be transferred over to the new plates) and any coilovers using stock upper strut mounts.

These can also be used with coilovers later down the road by adding spools and use the compatible top nuts.

$538

Order here:

http://www.hpashop.com/TC-Kline-Raci...-CP-F87-M2.htm

***3 hole design pictured***
Attached Images
  

Last edited by HP Autosport; 01-23-2017 at 12:11 PM..
Appreciate 0
      01-17-2017, 10:37 AM   #2
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

bump
Appreciate 0
      01-22-2017, 07:54 PM   #3
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

bump
Appreciate 1
      01-23-2017, 12:11 PM   #4
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

bump
Appreciate 0
      01-26-2017, 05:17 PM   #5
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

bump
Appreciate 0
      01-31-2017, 12:50 PM   #6
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing in only interested in offering the best quality components possible
Appreciate 0
      01-31-2017, 01:28 PM   #7
ashburyn54
Captain
ashburyn54's Avatar
624
Rep
796
Posts

Drives: f87 M2
Join Date: Jun 2014
Location: dayton

iTrader: (0)

Quote:
Originally Posted by HP Autosport View Post
TC Kline Racing in only interested in offering the best quality components possible
Will this raise the effective ride height in the front with the stock strut?
Appreciate 0
      01-31-2017, 01:51 PM   #8
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Quote:
Originally Posted by ashburyn54 View Post
Will this raise the effective ride height in the front with the stock strut?
Just spoke to TC on the phone. He said if there is any changes it shouldn't be more than 1/16".
Appreciate 0
      02-02-2017, 10:52 AM   #9
ashburyn54
Captain
ashburyn54's Avatar
624
Rep
796
Posts

Drives: f87 M2
Join Date: Jun 2014
Location: dayton

iTrader: (0)

Quote:
Originally Posted by HP Autosport View Post
Quote:
Originally Posted by ashburyn54 View Post
Will this raise the effective ride height in the front with the stock strut?
Just spoke to TC on the phone. He said if there is any changes it shouldn't be more than 1/16".
Okay thank you!
Appreciate 0
      02-07-2017, 01:36 PM   #10
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

bump
Appreciate 0
      02-14-2017, 11:43 AM   #11
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing Camber Plates
Appreciate 0
      02-21-2017, 11:02 AM   #12
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

bump
Appreciate 0
      03-01-2017, 05:51 PM   #13
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing Camber Plates
Appreciate 0
      03-09-2017, 11:51 AM   #14
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing Camber Plates F87 M2
Appreciate 0
      03-19-2017, 11:35 AM   #15
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing camber plates

Last edited by HP Autosport; 03-30-2017 at 10:26 AM..
Appreciate 0
      03-30-2017, 10:29 AM   #16
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing in only interested in offering the best quality components possible
Appreciate 0
      04-08-2017, 11:57 PM   #17
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Camber plates.

If you are local to Santa Barbara, we install them too!
Appreciate 0
      04-18-2017, 10:31 AM   #18
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing Camber Plates F87 M2
Appreciate 0
      04-26-2017, 12:45 PM   #19
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing Camber Plates F87 M2
Appreciate 0
      05-02-2017, 06:04 PM   #20
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

TC Kline Racing Camber Plates F87 M2
Appreciate 0
      05-08-2017, 02:10 PM   #21
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

We ship worldwide
Appreciate 0
      05-14-2017, 04:32 PM   #22
HP Autosport
BimmerPost Supporting Vendor
United_States
3776
Rep
54,154
Posts


Drives: F80 M3
Join Date: Mar 2007
Location: Santa Barbara, AP, Brembo, GIAC, Koni, Ohlins, Performance Friction, www.hpautosport.com

iTrader: (36)

Bump
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:35 PM.




m2
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST