[Sublime00]

So I purchased the McGard wheel locks model 27326 which were recommended by McGard rep for m2 comp.

They're a size M14x1.25 which should fit, but doesn't the wheel lock lug look a little longer than the stock lug?

I attached pics below.

[BigKutta]

Tread length looks about right, but the lug istelf may stick out more that the BMW lug or BMW lock. Give it a go and remember 101 lb ft

[ChrisK]

Originally Posted by BigKutta

Tread length looks about right, but the lug istelf may stick out more that the BMW lug or BMW lock. Give it a go and remember 101 lb ft

Isn't 103 ft/lbs = 140Nm

[BigKutta]

Originally Posted by ChrisK

Isn't 103 ft/lbs = 140Nm

You are correct, my bad

[Artemis]

Originally Posted by Sublime00

So I purchased the McGard wheel locks model 27326 which were recommended by McGard rep for m2 comp.
They're a size M14x1.25 which should fit, but doesn't the wheel lock lug look a little longer than the stock lug?
I attached pics below.

In this thread as well as in a PM to you, I pointed out that mine on my M2C and on my former M2 are McGard 27226SUB. No issues.

M14 x 1.25 is correct.

[mikeyymonster]

Originally Posted by mikeyymonster

Anyone have recommendations to be used with 10mm spacers?

Just to answer my own question, I am using a set of Farad wheel locks with my 10mm spacers.

https://otisincla.com/product/farad-...black-one-key/

Alternatively, ECS Tuning makes a set:

https://www.ecstuning.com/b-ecs-part...901ecs38b3~ec/