12-26-2018, 05:22 PM | #1 |
Lieutenant Colonel
1120
Rep 1,644
Posts |
Exhaust burble/overrun = anti-lag?
Featured on BIMMERPOST.com |
12-26-2018, 06:26 PM | #2 |
Colonel
3179
Rep 2,577
Posts |
Igniting fuel on lift off appears help keep the manifold pressure, but the diverter valve already does just a much better job at it.
DV has been a smart engineering and specially well executed by BMW as you probably notice every single turbocharged BMW has excellent throttle on/off response, with or without burble. Huracan/R8 albeit being naturally aspirated, pops and crackles like crazy from factory. Let's believe it's just drama.
__________________
Lemania 2320
|
Appreciate
1
M2OG400.00 |
12-27-2018, 06:48 AM | #3 | |
Lieutenant Colonel
1120
Rep 1,644
Posts |
Quote:
|
|
Appreciate
0
|
12-27-2018, 06:13 PM | #5 | |
Colonel
3179
Rep 2,577
Posts |
Quote:
One more thing indicating that burble won't be necessary for more responsiveness - there is the wastegate to dictate how much exhaust flow is pushing the turbine. And if you read log, wastegate duty % is never 100% outside of spool up. That means if DME wants more turbine shaft speed during pedal lift off, wastegate duty can always increase to achieve that and much more accurately.
__________________
Lemania 2320
|
|
Appreciate
0
|
04-07-2020, 06:17 PM | #6 |
@lbb_kev
491
Rep 514
Posts |
Reviving this thread... I'm currently running BM3 stage 1 OTS tune with FBO's (Fabspeed sport cat DP, Remus exhaust, etc..) and even the OEM burble settings are now slightly obnoxious for my tastes.
Have there been any new insights regarding the cons to disabling burbles? |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|