Work Meister M1 on an M2

Peasley · 07-17-2018, 05:49 AM

19 x 9.5 Front, 19 x 10.5 Rear. Centre caps are on order so should arrive in the next day or so

twin fed · 07-17-2018, 11:02 AM

Look Great

supersam · 07-17-2018, 06:48 PM

Looks very mean. What suspension setup

Peasley · 07-18-2018, 06:19 AM

Quote:

Originally Posted by supersam

Looks very mean. What suspension setup

Currently just H&R springs.

AndrewC1989 · 07-18-2018, 10:11 AM

Not a huge fan of the wheels but I think you did a really good job mixing and matching all of your aero.

Mode carbon lip, perl side skirts, ebay mirror caps, MPE rear spoiler...looks dope AF.

Peasley · 07-18-2018, 10:43 AM

Quote:

Originally Posted by andrewc89

Not a huge fan of the wheels but I think you did a really good job mixing and matching all of your aero.

Mode carbon lip, perl side skirts, ebay mirror caps, MPE rear spoiler...looks dope AF.

Thanks, I deliberated long and hard on which wheels to go for. Originally I had the Work M8R's on order which are a bit less in your face and a bit more OEM looking but kept looking at pics of these.

The spoiler is actually a PSM Dynamic so it's a proper mix of brands

twin fed · 07-18-2018, 11:50 AM

Also, if you want that real race look, leave the center caps off

AndrewC1989 · 07-18-2018, 01:59 PM

Quote:

Originally Posted by twin fed

Also, if you want that real race look, leave the center caps off

I personally wouldn't want rusty wheel hubs exposed but to each their own

twin fed · 07-18-2018, 03:07 PM

Quote:

Originally Posted by andrewc89

I personally wouldn't want rusty wheel hubs exposed but to each their own

Obviously to each their own, but to me it gives a little character to a otherwise clean car.

tenkies · 07-18-2018, 03:24 PM

Looks great. Any idea on the weight of those rims?

Sales@wheelsdc.com · 07-18-2018, 11:17 PM

Looks good

Peasley · 07-19-2018, 01:30 PM

Quote:

Originally Posted by tenkies

Looks great. Any idea on the weight of those rims?

Not sure to be honest, wish I had weighed them now. They felt fairly comparable with the stock wheels but sure they must be a bit heavier.

tenkies · 07-19-2018, 05:16 PM

What are the offsets on the wheels? I didn't see them posted

Peasley · 07-20-2018, 03:24 PM

Quote:

Originally Posted by tenkies

What are the offsets on the wheels? I didn't see them posted

Full specs are as follows:

Work Wheels Meister M1

FRONT

Wheel Diameter
19"
Wheel Width
9.5J
Offset
24
PCD
5x120
Disk Type
R Disk (Big Caliper)
Colour
Standard Silver
Rim Colour
Standard Polished
Bolt Colour
Standard (Chrome)

REAR

Wheel Diameter
19"
Wheel Width
10.5J
Offset
43
PCD
5x120
Disk Type
O Disk (Deep Dish)
Colour
Standard Silver
Rim Colour
Standard Polished
Bolt Colour
Standard (Chrome)

Bt12 · 07-21-2018, 10:26 AM

Looks great

AvoryM2 · 10-08-2018, 02:35 AM

Hey Peasley, great choice for your rims!

There is no added spacer for your rear? I am surprised that O disc could clear our brakes!

mr_lab_rat · 10-08-2018, 03:10 AM

At 9.5 ET24 the fronts are sitting 11mm farther out than stock which is pretty much flush when lowered.
10.5 ET43 is just 3mm wider so 6-8mm spacer would make it look right.

AvoryM2 · 10-08-2018, 04:58 AM

Quote:

Originally Posted by mr_lab_rat

At 9.5 ET24 the fronts are sitting 11mm farther out than stock which is pretty much flush when lowered.
10.5 ET43 is just 3mm wider so 6-8mm spacer would make it look right.

Or you could go for an even more aggressive spec

Im currently on F: 10 et20 and R: 11 et29

Peasley · 10-08-2018, 08:16 AM

Quote:

Originally Posted by m2_jzn

Hey Peasley, great choice for your rims!

There is no added spacer for your rear? I am surprised that O disc could clear our brakes!

Cheers mate. Yes currently there are 10mm spacers on the rears from my stock wheel setup. It pokes the rears out a bit more than I would like so looking to get some smaller spacers soon

AvoryM2 · 10-08-2018, 08:54 AM

Quote:

Originally Posted by Peasley

Cheers mate. Yes currently there are 10mm spacers on the rears from my stock wheel setup. It pokes the rears out a bit more than I would like so looking to get some smaller spacers soon

May I ask without spacers, are you able to fit the rims without any problem? Since Work Wheels website has suggested using L disc for both front and rear.

Thanks again mate... Btw do you have instagram page to follow?

Peasley · 10-08-2018, 09:45 AM

Quote:

Originally Posted by m2_jzn

May I ask without spacers, are you able to fit the rims without any problem? Since Work Wheels website has suggested using L disc for both front and rear.

Thanks again mate... Btw do you have instagram page to follow?

The fronts fit without issue but the rears wouldn't clear the calipers without running a spacer. I think if I lowered the car a bit more it might help the rears tuck within the arches.

If memory serves me correct I went with the O disc on the rear in order to run a deeper dish. Driftworks (UK distributor for Work) helped me spec the wheels and followed their advice.

No Instagram currently but time will tell

AvoryM2 · 10-08-2018, 12:02 PM

Quote:

Originally Posted by Peasley

The fronts fit without issue but the rears wouldn't clear the calipers without running a spacer. I think if I lowered the car a bit more it might help the rears tuck within the arches.

If memory serves me correct I went with the O disc on the rear in order to run a deeper dish. Driftworks (UK distributor for Work) helped me spec the wheels and followed their advice.

No Instagram currently but time will tell

Do you think A disc can clear with 10mm spacer? For the front.
Also keep us update if you can clear with less mm spacer. Im looking to get o disc as well but with 5mm maximum

Thx again mate

07-17-2018, 05:49 AM	#1
Peasley General Moron 247 Rep 158 Posts Drives: M2 LCI MT & E30 Drift Slag Join Date: Apr 2018 Location: UK iTrader: (0)	Work Meister M1 on an M2 19 x 9.5 Front, 19 x 10.5 Rear. Centre caps are on order so should arrive in the next day or so
	Appreciate 8 Bee Pee1774.00 AndrewC198910910.50 QM287.00 BLUE-BEAST///M247.00 dtmpower98334.50 bunnyhive55.50 COChris888.50 rogeroger73.00 Tweet Quote

07-17-2018, 11:02 AM	#2
twin fed Doc Brown 1176 Rep 2,174 Posts Drives: 2016 MG MT M2 Join Date: May 2008 Location: Isle of Long iTrader: (2)	Look Great __________________
	Appreciate 1 Peasley247.00 Quote

07-17-2018, 06:48 PM	#3
supersam Da Baus 283 Rep 259 Posts Drives: F87 6MT, RA, E46 Join Date: Feb 2016 Location: NY/MI iTrader: (0)	Looks very mean. What suspension setup __________________ M2 LBB/6MT/VFstg2/V1 stealth/JRC valve delete/Dinan/ Fabspeed/Wagner/ER/Eibach/UCP/RTD RA Evo X/WhalenTuned/AMS/ETS/UR/AEM/Swift/RRM/VIS/ID E46 330ci --> S54 M3 xplant vzv 3bananas (retired)
	Appreciate 1 Peasley247.00 Quote

07-18-2018, 10:11 AM	#5
AndrewC1989 Brigadier General 10911 Rep 4,541 Posts Drives: 2015 328d xDrive Join Date: Aug 2010 Location: NoVA iTrader: (5) Garage List 2015 328d xDrive [8.75]	Not a huge fan of the wheels but I think you did a really good job mixing and matching all of your aero. Mode carbon lip, perl side skirts, ebay mirror caps, MPE rear spoiler...looks dope AF.
	Appreciate 1 Peasley247.00 Quote

07-18-2018, 11:50 AM	#7
twin fed Doc Brown 1176 Rep 2,174 Posts Drives: 2016 MG MT M2 Join Date: May 2008 Location: Isle of Long iTrader: (2)	Also, if you want that real race look, leave the center caps off __________________
	Appreciate 1 Sundinisagod107.00 Quote

07-18-2018, 03:24 PM	#10
tenkies Second Lieutenant 147 Rep 266 Posts Drives: 2017 M2 LBB 6MT Join Date: Oct 2017 Location: Socal iTrader: (0)	Looks great. Any idea on the weight of those rims?
	Appreciate 1 Peasley247.00 Quote

07-18-2018, 11:17 PM	#11
Sales@wheelsdc.com Major General 301 Rep 6,659 Posts Drives: BMW Join Date: Dec 2017 Location: US iTrader: (0)	Looks good
	Appreciate 1 Peasley247.00 Quote

07-19-2018, 05:16 PM	#13
tenkies Second Lieutenant 147 Rep 266 Posts Drives: 2017 M2 LBB 6MT Join Date: Oct 2017 Location: Socal iTrader: (0)	What are the offsets on the wheels? I didn't see them posted
	Appreciate 0 Quote

07-21-2018, 10:26 AM	#15
Bt12 Captain 391 Rep 960 Posts Drives: 2018 X5,2018 m2, 2018 x1 Join Date: Sep 2017 Location: Bicoastal iTrader: (0)	Looks great
	Appreciate 1 Peasley247.00 Quote

10-08-2018, 02:35 AM	#16
AvoryM2 New Member 11 Rep 8 Posts Drives: BMW M2 Join Date: Oct 2018 Location: Hong Kong iTrader: (0)	Hey Peasley, great choice for your rims! There is no added spacer for your rear? I am surprised that O disc could clear our brakes!
	Appreciate 1 Peasley247.00 Quote

10-08-2018, 03:10 AM	#17
mr_lab_rat Major 564 Rep 1,092 Posts Drives: 2017 M2, 2018 X1 Join Date: Jul 2017 Location: Vancouver iTrader: (0)	At 9.5 ET24 the fronts are sitting 11mm farther out than stock which is pretty much flush when lowered. 10.5 ET43 is just 3mm wider so 6-8mm spacer would make it look right.
	Appreciate 0 Quote