01-17-2017, 07:47 PM | #1 |
Second Lieutenant
117
Rep 220
Posts |
Passenger Restraint System Malfunction
Featured on BIMMERPOST.com But, long story short, after I put everything back together, I have a Service Request warning for Passenger Restraint System Malfunction. I DID disconnect the maplight console and yes, probably turned on the ignition at some point in that state, so I'm HOPING that it's a simple reset somewhere rather than a stretched wire in that harness. I struggled with splicing that wire and could have done something to adjacent wires, but doubt it. I have esys and cable and have coded a few things. I googled the error and didn't find anything crystal clear for F22/87 about how to reset the error. Can anyone point me in the right direction? I could take an educated guess or try to figure it out, but I'd rather stand on the shoulders of giants for anything as important as safety features considering my trivial knowledge on the subject. Can anyone point me to a how-to for resetting warnings? Thanks in advance for any assistance. Peter/CantComplain |
Post Reply |
Bookmarks |
|
|