[Rat_House]

My saga s-plus came in a few weeks ago, finally got them on and coilovers adjusted. Stock tire sizes and factory alignment specs. Debating adding a small spacer but tbh fitment is pretty good

[Julien_P]

Looks pretty good Rat_House

Is your car HS? I was debating on Bronze or Diamond Dark Gun Metal. Do you have any other pics ?

I also think that a small spacer could make it look even better, like 5-6 mm but only front to make it even.

[Rat_House]

[QUOTE="Julien_P;31322513"]Looks pretty good Rat_House

Is your car HS? I was debating on Bronze or Diamond Dark Gun Metal. Do you have any other pics ?

I also think that a small spacer could make it look even better, like 5-6 mm but only front to make it even.





Yeah it’s Hockenheim, I wanted to get mag blue to match the interior stitching but it would’ve been a longer wait. The bronze works pretty well with the silver imo.

Yeah both front and rear could probably fit 5-10mm spacers especially with the slight tire stretch. I’ll try to get some more pics this weekend.

[Vulpe]

I ended up putting a 3mm spacer on my rears. My previous wheels were 32, and with these at 34 I didn't think I would notice but I did. I'm much happier with them at 31. Probably wouldn't have done it if these tires had a wider more square shoulder. Or if I lowered my car like you guys.

Oh yeah, and the bronze on these wheels are in a completely different league than what I had on BC Forged, it has like so much more depth and shades of bronze through out. Before it was bronze, but now it's BRONZE.

[Julien_P]

New pictures from Cars & Coffee last week-end

[projekt-]

Originally Posted by Julien_P

New pictures from Cars & Coffee last week-end

Clean. Did you decide to run any spacers or just as is with the offsets?

[Julien_P]

Originally Posted by projekt-

Clean. Did you decide to run any spacers or just as is with the offsets?

That’s without spacers, I like how it fits honestly

[MadM2C]

Switched out from the bronze sagas to SL
18x10+25 10mm spacer up front. 275/35 square

[Julien_P]

That looks amazing! MadM2C

[TeeeeeeDub]

Originally Posted by Julien_P

Here’s some quick pictures with iphone, can’t wait to take proper ones.

Fitment is on point IMO 19x9 +23 / 19x10 +34 so 6mm out compared to oem, still on oe sizes PS4S as they are only 2000miles old.

Looks AMAZING. I have the same exact wheel size and offsets on my car but running G025's and I feel that the fronts are far too conservative offset and width wise.

The rear offset are good but a 19x10 isn't wide enough IMO with a +34 offset.

I think a better fitment on our car would be a 19x9.5 +20 (ish) and a 19x10.5 +34 (ish) (or 19x11 +40 ish).

I have a 10mm spacer coming for the front and a 5mm for the rears as well.

[ThreeStripes]

G025s in that finish look amazing on Hock. I love them on BSM but man they look great as pictured. Agree the fronts need 5-10mm spacer. Even more so when you’re running lots of negative camber like I am.