[fordnox]

Hi there,

since my OPF is getting removed and i am on locked DME Software i am wondering if there is any chance to run the AK Motion OPF Delete in combination with JB4 Map2.

As far as i know - if i unplug die OBD connector of the JB4, it is just adding boost like on map1.

is there a way to use map 2 and the datadisplay(active) at the same time.

At the Moment the Data Display is in passive mode(just oil and water temperature)

BR

[Megator]

Cant you just use one of these and run them in parallel?

https://www.amazon.com/obd-splitter/s?k=obd+splitter

Also maybe I would try and us the USA maps if you remove the OPF. The exahust restriction will change which might lead to overspooled turbos no?

[fordnox]

Originally Posted by Megator

Cant you just use one of these and run them in parallel?

https://www.amazon.com/obd-splitter/s?k=obd+splitter

Also maybe I would try and us the USA maps if you remove the OPF. The exahust restriction will change which might lead to overspooled turbos no?

i think the Problem is the double use of the bus...there would be no Problem to use both devices parallel, but both will talk to the bus and disturb each other…
i dont think this will lead to overspooled Turbos because you can drive complete catless aswell...

[Megator]

Originally Posted by fordnox

i think the Problem is the double use of the bus...there would be no Problem to use both devices parallel, but both will talk to the bus and disturb each other…
i dont think this will lead to overspooled Turbos because you can drive complete catless aswell...

well it does go into limp mode if you have not tuned the ecu.

I dont think there are many people in your situation sadly. You might just have to try and see if there are any conflicts.

[fordnox]

Originally Posted by Megator

well it does go into limp mode if you have not tuned the ecu.

I dont think there are many people in your situation sadly. You might just have to try and see if there are any conflicts.

i think i will give it a try. otherwise i will use jb4 without obd....should be map1 then

[VIERsr]

Doesn't JB4 include an OPF-delete function?

[fordnox]

from my knowledge, no...