[Mahduece]

Lost my wheel lock key, (I know ), I’ve order 3 different sizes and all where too small. Anyone have a definitive size that fits? My non locking lugs have an etched 14-2, but that is not a size that correlated to the lock key size.

[DanG]

Originally Posted by Mahduece

Lost my wheel lock, (I know ), I’ve order 3 different sizes and all where too small. Anyone have a definitive size that fits? My non locking lugs have an etched 14-2, but that is not a size that correlated to the lock key size.

M14 X 1.25 is what you need. https://www.fcpeuro.com/products/bmw...yABEgKf__D_BwE

[Mahduece]

Originally Posted by DanG

M14 X 1.25 is what you need. https://www.fcpeuro.com/products/bmw...yABEgKf__D_BwE

Thank you but I need the key to remove the lock lug, not a new set. Proj kics doesn’t do normal sensical sizes like 14x1.25.

I’m at the point of buying every lock key or having these cut off.

[Brokenbones]

I had all 4 removed in less than 2 minutes when I lost my key, immediately went back to good old lug nuts.
Did find the lug key 8 years later wedged between engine and motor mount…

[Mahduece]

After a long search I found part # wa127142
In theory this should fit. If not I’ll report back