[VisualEcho]

Originally Posted by Conissah

I was just throwing mods out there that would be simple and clean but still change the look. I don't think it rides high per se, but it could definitely be lower. And wheels because the 788 are heavy, hard to clean, and dont really fit the look of the car. Obviously this all opinion.

I feel like if BMW had matched the wheel-to-fender/quarter gap front and rear that a lot less people would lower the car. It's a question of millimeters, but quite obvious.

I also 100% agree that the 788 was just the wrong choice for the car, for the exact reasons you mentioned.

[BigKutta]

Originally Posted by Conissah

I was just throwing mods out there that would be simple and clean but still change the look. I don't think it rides high per se, but it could definitely be lower. And wheels because the 788 are heavy, hard to clean, and dont really fit the look of the car. Obviously this all opinion.

The 788s are a bitch to clean, but I like the look of them a lot. But if I were to stumble upon a nice set of 437s at a good price, I might jump on them, so change things up once in a while

[///AVM]

I do not mind the 788 wheels, but I do prefer the M2 (437M) wheels.

Still do not understand why the M2C can be optioned out in Canada with 437M wheels, but not in U.S.?

I wonder if that will continue to be the case for 21' M2C?

///AVM

[arciga18]

Originally Posted by ///AVM

I do not mind the 788 wheels, but I do prefer the M2 (437M) wheels.

Still do not understand why the M2C can be optioned out in Canada with 437M wheels, but not in U.S.?

I wonder if that will continue to be the case for 21' M2C?

///AVM

The USA ordering guide only allows the 788s are you asking about Canada?

I would trade 788s for mint 437 I'll the spot

[///AVM]

Originally Posted by arciga18

The USA ordering guide only allows the 788s are you asking about Canada?

I would trade 788a for mint 437 I'll the spot

Arciga

Yes, I realize the M2C only comes with 788 wheels in U.S., and was inquiring if the M2C will continue to have 437 wheel option in Canada for 21' model.

///AVM

[Artemis]

Originally Posted by BigKutta

The 788s are a bitch to clean, but I like the look of them a lot. But if I were to stumble upon a nice set of 437s at a good price, I might jump on them, so change things up once in a while

OK, here's a 788M wheel wash crash course.

Breathe and focus on the car...

[BigKutta]

Originally Posted by Artemis

OK, here's a 788M wheel wash crash course.

Breathe and focus on the car...

Thanks. I actually watch that video every time before washing my car, you know, just to be sure

[arciga18]

I watched it too. Great morning reading .

[Gizmo 335i]

I'll admit it...never once took my eyes off the lovely lady

[JCZ5]

I watched a previous video of her's when she installed the M performance lip splitter. Kinda curious why she has not added other mods, especially considering has the hydraulic lowering function on her car.

Also, she nods her other car frequently as well.

As an aside. I am in the mindset that if you add a lip splitter, you have to add a few other CF bits to complete the look. A spoiler or mirror caps can be added as a standalone as accent pieces. But a splitter...come on, go all out at this point 😂

[VisualEcho]

1000% better if she didn't talk.

[Poochie]

Originally Posted by Gizmo 335i

I'll admit it...never once took my eyes off the lovely lady

It's ok, when men's minds are foggy, they see what they want to see..

[Davil]

Originally Posted by Poochie

It's ok, when men's minds are foggy, they see what they want to see..

Nice but it looks like aftermarket parts being used. For me it has to be original.

[medphysdave]

Interesting. Europe getting shortened production run. Not sure of legitimacy

https://www.bimmertoday.de/2020/05/2...det-im-herbst/

[Westerwälder]

Originally Posted by medphysdave

Interesting. Europe getting shortened production run. Not sure of legitimacy

https://www.bimmertoday.de/2020/05/2...det-im-herbst/

Yes, this is somehow correct. My dealer told me that the production already ends in 09/2020 and it seems already impossible to order an new M2C today (due to shortened production cycle and no available build slots).
The end of production (for EU only!) is due to the new EU emission regulations in 2021...

[BigKutta]

Hmm. So no 2021 model for Europe, but the US will get another year at it, as originally slated for the US

[BigKutta]

Looks like the 2020s are moving. Did a quick browse of local inventory, and one dealer went from 4-5 ---> 1 M2C. The other from 9-->7 (with some gone and new ones arrived). This is during COVID SIP

[Really_fat_ninja]

Originally Posted by BigKutta

Looks like the 2020s are moving. Did a quick browse of local inventory, and one dealer went from 4-5 ---> 1 M2C. The other from 9-->7 (with some gone and new ones arrived). This is during COVID SIP

What would u expect when they giving 10% off

And 0.9% financing

[JCZ5]

Originally Posted by Really_fat_ninja

What would u expect when they giving 10% off

And 0.9% financing

Originally Posted by BigKutta

Looks like the 2020s are moving. Did a quick browse of local inventory, and one dealer went from 4-5 ---> 1 M2C. The other from 9-->7 (with some gone and new ones arrived). This is during COVID SIP

Also a lot of inventory that got moved were DCTs. Automated manuals have been sitting on lots for months. Especially with new inventory coming in at the end of the summer as '21; and rent / mortgages of buildings coming due, it makes sense to discount them. Traditionally, Memorial Day Weekend is also a popular time to buy cars.

[BigKutta]

Originally Posted by Really_fat_ninja

What would u expect when they giving 10% off

And 0.9% financing

They were giving 10% off back in December too, but nothing moved for months, now suddenly a bunch are gone in 1-2 weeks. I've been watching the M2s at these 2 dealers closely...

[BigKutta]

Originally Posted by JCZ5

Also a lot of inventory that got moved were DCTs. Automated manuals have been sitting on lots for months. Especially with new inventory coming in at the end of the summer as '21; and rent / mortgages of buildings coming due, it makes sense to discount them. Traditionally, Memorial Day Weekend is also a popular time to buy cars.

They didn't move at pretty good discounts before, so I wonder what they are discounting at now (based on your theory)?

[Really_fat_ninja]

Originally Posted by BigKutta

They were giving 10% off back in December too, but nothing moved for months, now suddenly a bunch are gone in 1-2 weeks. I've been watching the M2s at these 2 dealers closely...

Rates maybe? More of a guess here...