[IND-Distribution]

S55-equiped cars are incredibly well sorted from a cooling standpoint. Even in a road course environment with extremely high ambient temperatures, the S55 engine tends to operate beautifully, with consistent oil and water temperatures. Although excellent ducting, good core design, strong fans, and other factors all play in to how well a cooling system works, there are ultimately two factors which cannot be circumvented—you must have enough heat exchanger surface area, and you must have enough heat exchangers.

These constraints have left the S55 with a “fatal flaw”—the engine’s oil cooler is precariously exposed. A direct impact to the oil cooler can have catastrophic effects, draining the S55 of all of its oil in seconds, a dire fate that several owners have experienced in a painfully direct way.

In response to this, Fall-Line Motorsports has developed a robust oil cooler guard, specifically designed to shield the S55’s oil cooler from large road debris and prevent much more costly damage.

For the best real-world protection, the S55 oil cooler guard is constructed from a thick stainless steel plate and fastens directly to existing frame members to help spread the impact load across strong structural components. As an acknowledgement of BMW M’s aforementioned air flow engineering, special care was taken to ensure that the opening in the oil cooler guard matched the shape and size of the existing BMW oil cooler air outlet.

Installation hardware is included.

MADE IN THE USA.

The Fall Line Motorsports F87 M2 Competition Oil Cool Guard may be viewed at the following link to our online store:
https://ind-distribution.com/product...LM-F87C-3FSKID

Please contact IND by phone or email for more information or to place your order.
866.963.4520 | info@ind-distribution.com

[Ryan@IND]

Oil Cooler Guards are back in stock!

[leshkin]

Do you have a UK/EU distributor for these?

[IND-Distribution]

Originally Posted by leshkin

Do you have a UK/EU distributor for these?

You can try reaching out to Evolve (https://www.evolveautomotive.com/) or CFD (https://www.cf-dynamics.co.uk/)

[hlm2c]

This oil cooler guard is sturdy and heavy duty. I have it installed and have to go over one way traffic spikes that don't retract on the daily and causes my M2C to scrape sometimes when I don't position well going over them. I raised my car on the lift the other day and noticed some light scratches from the metal spikes that had scraped the oil guard over the past few months, but other than that, there wasn't any damage and this thing holds up great. Provides a peice of mind that it will protect my oil cooler and would definitely recommend this to any M2C owner. It's worth it.

[Saintjah]

Heres mine installed

[IND-Distribution]

This is still one of our "must have" mods for the F87 M2 (S55) cars. We're happy to report that factory air flow has been preserved wonderfully while simultaneously adding a welcomed peace of mind, not just on normal street driving, but also on track as well from sudden track debris, etc.

[IND-Distribution]

Also in Wrinkle Black finish

[IND-Distribution]

More in stock and ready to ship!

https://ind-distribution.com/product...l-cooler-guard