BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read
M2 Technical Topics > N55 Engine / Drivetrain / Exhaust / Bolt-ons / Tuning > bootmod3 for BMW F series Vehicles - General Discussion

Post Reply
 
Thread Tools Search this Thread
      06-26-2017, 02:02 PM   #89
Acexxon
Captain
605
Rep
671
Posts

Drives: 2016 F06 M6 F87 M2
Join Date: Feb 2016
Location: CAN

iTrader: (0)

Quote:
Originally Posted by SeanWRT View Post
David,

I'll say it's really impressive for a N55 stock turbo make that kind of uncorrected wheel power on pump gas without meth in place, yet repeatable on a 90+F hot day and 60% humidity - 620NM (455lb*ft) of torque at max tapers to 430NM(317lf*ft) at fuel cutoff. Up next in my opinion you'll want to find a benchmark to make sure 430nm(317lb*ft) of torque at redline is valid.

It takes a discerning eye to really see how torque really holds or falls up top from your dyno plot. It'd be much easier with just "NM or lb*ft" instead of KG*M for the measurement unit and removal the part of below zero. Let me help you with dyno plot below properly presenting torque curve.

In addition, please clarify a few parameters associated with your dyno runs if you don't mind:
1) Fuel Octane?
2) Which gear?
3) Why fuel cutoff at 6100? Is it because of the incorrect speed to rpm calculation by Dynojet? This can also lead to incorrect torque value, hp would be correct regardless.
4) Max boost and the boost at redline?
Hi,

I'll need to ask the tech to answer some of your questions; maybe tomorrow.

I tried out the latest stage 2 map and it is a lot better now. Everything seem fine in all the gears and driving modes. I plan to do some 100-200 runs tomorrow to check the actual performance gain.
Appreciate 2
BAN_M2C2987.50
FSociety3209.00

      06-27-2017, 03:07 PM   #90
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3308
Rep
1,605
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

Quote:
Originally Posted by Acexxon View Post
Hi,

I'll need to ask the tech to answer some of your questions; maybe tomorrow.

I tried out the latest stage 2 map and it is a lot better now. Everything seem fine in all the gears and driving modes. I plan to do some 100-200 runs tomorrow to check the actual performance gain.


Laptop OBD Agent Update:

We've added a slight update to laptop based OBD agent interface. When started on a Mac you can now follow along on the status information as it connects which can be convenient. Same update is there on Windows and double clicking the start.bat file doesn't start the other console window anymore.

As usual you can grab the latest OBD Agent update from our dropbox here:

https://www.dropbox.com/s/vg36ozhm2b...agent.zip?dl=0

Appreciate 4
BAN_M2C2987.50
SeanWRT2480.00
FSociety3209.00

      06-27-2017, 11:27 PM   #91
MTWO
Lieutenant
265
Rep
412
Posts

Drives: M2
Join Date: Dec 2016
Location: Innisfil

iTrader: (0)

PM me your best offer shipped to 14203
Appreciate 0
      06-28-2017, 04:05 AM   #92
SeanWRT
Colonel
SeanWRT's Avatar
2480
Rep
2,274
Posts

Drives: E90 M3 & F87 M2
Join Date: Sep 2015
Location: Shanghai

iTrader: (1)

I've been testing the latest map Dzenno pushed to me last week. Now I confirm throttle issue has been addressed. The car is pulling N54 FBO strong and N55 stock smooth. The data logs look solid as well.

I'll do delta dyno (vs stock m2, stock m4, BM3 Stg1 m4), when everything is ready.

Huge thanks to Dzenno and Halim for the support! Great customer service for oversea customers David and I!
__________________
Lemania 2320
Appreciate 3
FSociety3209.00
BAN_M2C2987.50
NO_USER_523.50

      06-28-2017, 07:21 PM   #93
MTWO
Lieutenant
265
Rep
412
Posts

Drives: M2
Join Date: Dec 2016
Location: Innisfil

iTrader: (0)

Quote:
Originally Posted by SeanWRT View Post
I've been testing the latest map Dzenno pushed to me last week. Now I confirm throttle issue has been addressed. The car is pulling N54 FBO strong and N55 stock smooth. The data logs look solid as well.

I'll do delta dyno (vs stock m2, stock m4, BM3 Stg1 m4), when everything is ready.

Huge thanks to Dzenno and Halim for the support! Great customer service for oversea customers David and I!
PTF has been amazing to deal with for me as well. Software kicks some serious butt and guys really work their bums off to get us taken care of. Concur on last maps, very very nice!
Appreciate 2
FSociety3209.00
BAN_M2C2987.50

      06-29-2017, 08:17 AM   #94
FSociety
2020 X3M/X4M Coming Soon
FSociety's Avatar
No_Country
3209
Rep
7,082
Posts

Drives: F90 M5, F80 M3 ZCP
Join Date: Apr 2012
Location: NYC NJ CT PA FL

iTrader: (3)

Garage List
Quote:
Originally Posted by MTWO View Post
PTF has ALWAYS been amazing to deal with for me as well. Software kicks some serious butt and guys really work their bums off to get us taken care of. Concur on last maps, very very nice!
+1
__________________
F90 M5 @BM3Tuning/HCP Stg1 6.6s | 10.3@134 | 0-60 2.61s | HCP Stg2 60-130 6.1s 10.1@138
F98 X4MC

http://www.instagram.com/BMWF9XM
Appreciate 3
      06-29-2017, 12:45 PM   #95
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3308
Rep
1,605
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

Quote:
Originally Posted by SeanWRT View Post
I've been testing the latest map Dzenno pushed to me last week. Now I confirm throttle issue has been addressed. The car is pulling N54 FBO strong and N55 stock smooth. The data logs look solid as well.

I'll do delta dyno (vs stock m2, stock m4, BM3 Stg1 m4), when everything is ready.

Huge thanks to Dzenno and Halim for the support! Great customer service for oversea customers David and I!
Pleasure working with both David and yourself Sean. All the best, looking forward to your dyno

Quote:
Originally Posted by MTWO View Post
PTF has been amazing to deal with for me as well. Software kicks some serious butt and guys really work their bums off to get us taken care of. Concur on last maps, very very nice!
Appreciate 4
FSociety3209.00
SeanWRT2480.00
BAN_M2C2987.50
NO_USER_523.50

      07-04-2017, 12:27 PM   #96
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3308
Rep
1,605
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

We'd like to welcome EAS (European Auto Source) to the bootmod3 dealer program. They've been great to work with and their in-house Dynojet 224 xLC is available for those of you looking to get dynoed or custom tuned. This M2 was there recently and made 509whp/510wtq on E85 at just 18.5psi with a Pure Stage 2 turbo on it and secondary port fuel injection via the AIC fuel controller:



Appreciate 5
FSociety3209.00
SeanWRT2480.00
S1monQc220.50
BAN_M2C2987.50

      07-05-2017, 10:47 AM   #97
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3308
Rep
1,605
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

NEW UPDATE:

A new option to transmission flashing is now available via bootmod3 to flash back to stock for the S55 and M2 DCT. Its out there in testing and for those interested you can give it a shot now. Let us know via support portal if any questions or issues about it at all.
Appreciate 2
FSociety3209.00
SeanWRT2480.00

      07-05-2017, 12:02 PM   #98
SeanWRT
Colonel
SeanWRT's Avatar
2480
Rep
2,274
Posts

Drives: E90 M3 & F87 M2
Join Date: Sep 2015
Location: Shanghai

iTrader: (1)

Quote:
Originally Posted by proTUNING Freaks View Post
NEW UPDATE:

A new option to transmission flashing is now available via bootmod3 to flash back to stock for the S55 and M2 DCT. Its out there in testing and for those interested you can give it a shot now. Let us know via support portal if any questions or issues about it at all.
Many thanks for making this flash so accessible and now reversible. Some tuners charge few hundred dollars for this. GTS gearbox flash receives great feedbacks from S55 community.

I'm one of few m2s that flashed GTS and it didn't work well. Whatever mode you're in, it is always trying to put you into highest possible gear and is very lazy to downshift. Overall it makes a much less responsive car so I flashed back to stock DCT.

I'm hoping PTF will at some point make this flash really m2 compatible - we need it work for m2 the way it does for S55 right now.

Thank you.
__________________
Lemania 2320
Appreciate 0
      07-07-2017, 06:11 PM   #99
BAN_M2C
Colonel
BAN_M2C's Avatar
United_States
2988
Rep
2,533
Posts

Drives: 2019 M2 Competition
Join Date: Jul 2016
Location: Sunshine State

iTrader: (2)

@proTUNING Freaks saw the App pushed out an update today. New features???
__________________
2019 M2 Competition Ordered
2017 LBB M2|2011 BSM 135i|Follow me on IG
2019 M2 Competition|2017 LBB M2 (Sold)|2011 BSM 135i|1974 Granarot 2002
Appreciate 1
FSociety3209.00

      07-09-2017, 08:43 AM   #100
MTWO
Lieutenant
265
Rep
412
Posts

Drives: M2
Join Date: Dec 2016
Location: Innisfil

iTrader: (0)

Thank you guys so much for providing the feature to switch back and forth from gts to stock and back. For daily regular duty I will use stock but at the track when I'm pounding on the car I am switching to the GTS TCU flash for extra clamping force to the clutches. Takes like a minute to do. Love everything you do! Keep it up and thank you!
Appreciate 0
      07-17-2017, 02:19 PM   #101
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3308
Rep
1,605
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

Quote:
Originally Posted by SeanWRT View Post
Many thanks for making this flash so accessible and now reversible. Some tuners charge few hundred dollars for this. GTS gearbox flash receives great feedbacks from S55 community.

I'm one of few m2s that flashed GTS and it didn't work well. Whatever mode you're in, it is always trying to put you into highest possible gear and is very lazy to downshift. Overall it makes a much less responsive car so I flashed back to stock DCT.

I'm hoping PTF will at some point make this flash really m2 compatible - we need it work for m2 the way it does for S55 right now.

Thank you.
Changing TCU programming from stock and GTS is something that's in the plans for the future for sure as we'd also LOVE to be able to do that.

Quote:
Originally Posted by BAN_M2 View Post
@proTUNING Freaks saw the App pushed out an update today. New features???
It was the update for the above TCU flashing support.

Quote:
Originally Posted by MTWO View Post
Thank you guys so much for providing the feature to switch back and forth from gts to stock and back. For daily regular duty I will use stock but at the track when I'm pounding on the car I am switching to the GTS TCU flash for extra clamping force to the clutches. Takes like a minute to do. Love everything you do! Keep it up and thank you!
Thank you

======

Dealer update:

JR Auto Performance in Oakville, Ontario is now a BM3 dealer. Great shop and they've got an on-site dyno as well.

JR Auto Performance Inc.
1428 Speers Rd unit3.
Oakville, ON, L6L5M1
www.chiptuning.ca
email: info@chiptuning.ca, sales@chiptuning.ca
Phone: (905) 618-0279

For the most current dealer listing please refer to our dealer listing page here:

https://www.protuningfreaks.com/page...orized-dealers
Appreciate 2
FSociety3209.00
BAN_M2C2987.50

      07-29-2017, 07:27 PM   #102
PiK
Private
PiK's Avatar
Poland
56
Rep
66
Posts

Drives: M2 6MT
Join Date: Jan 2017
Location: Poland

iTrader: (0)

Quote:
Originally Posted by Acexxon View Post
Hi,

I'll need to ask the tech to answer some of your questions; maybe tomorrow.

I tried out the latest stage 2 map and it is a lot better now. Everything seem fine in all the gears and driving modes. I plan to do some 100-200 runs tomorrow to check the actual performance gain.
Hi, could you share your results with us?
Appreciate 0
      07-31-2017, 10:08 PM   #103
Acexxon
Captain
605
Rep
671
Posts

Drives: 2016 F06 M6 F87 M2
Join Date: Feb 2016
Location: CAN

iTrader: (0)

Quote:
Originally Posted by PiK View Post
Hi, could you share your results with us?
Hi, I have been extremely busy and didn't have the time late at night to do some 100-200 pulls.

However, I received an updated version tailored for the EU specs and the car runs so much smoother now and without any engine check light nor error codes.

Still on a business trip in Japan, plan to do some more testings / datalog this weekend.

Cheers!
Appreciate 2
FSociety3209.00
PiK55.50

      08-20-2017, 11:13 AM   #104
SeanWRT
Colonel
SeanWRT's Avatar
2480
Rep
2,274
Posts

Drives: E90 M3 & F87 M2
Join Date: Sep 2015
Location: Shanghai

iTrader: (1)

I just had my HPDE today where I pushed pretty hard (for a none pro) in 2 out of the 3 sections I did. The ambient temperature is 33C/90F. I am on FBO setup, using the newest OTS STG2 map. My car held up power on track fine.

To my surprise, I kept pace with a M3 ZCP on long straights to 230kph, repeatedly. The trick is to short shift at 6200-6500rpm from 3rd gear on.
__________________
Lemania 2320
Appreciate 0
      08-31-2017, 02:31 PM   #105
FSociety
2020 X3M/X4M Coming Soon
FSociety's Avatar
No_Country
3209
Rep
7,082
Posts

Drives: F90 M5, F80 M3 ZCP
Join Date: Apr 2012
Location: NYC NJ CT PA FL

iTrader: (3)

Garage List
NEW UPDATE:

Latest iOS Update has been out for 24hrs now
Latest Android Update just hit App Store about 2hrs and finally fixed the new Google API issues.

Both confirmed to work on my side!
__________________
F90 M5 @BM3Tuning/HCP Stg1 6.6s | 10.3@134 | 0-60 2.61s | HCP Stg2 60-130 6.1s 10.1@138
F98 X4MC

http://www.instagram.com/BMWF9XM
Appreciate 0
      09-06-2017, 08:25 AM   #106
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3308
Rep
1,605
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

UPDATE: Version 0.9.28 pushed out to the Web and Google Play Store, iOS is under Apple's review and should be up in about 24 hours.

Changes in this release include:

- Diagnostic screen available now in offline mode, requires OBD Agent update (version 0.9.28)
- Space and performance optimization
- Enhanced Account Activation
- Updates for upcoming custom tuning and editor

We've started a Facebook group recently called 'bootmod3 enthusiasts' for those that prefer that format:

https://www.facebook.com/groups/1995370330682747
Attached Images
 
Appreciate 1
FSociety3209.00

      09-18-2017, 02:09 PM   #107
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3308
Rep
1,605
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

bootmod3 custom tuning editor, a little demo of the 3-d table view.

Appreciate 1
FSociety3209.00

      09-27-2017, 04:26 PM   #108
FSociety
2020 X3M/X4M Coming Soon
FSociety's Avatar
No_Country
3209
Rep
7,082
Posts

Drives: F90 M5, F80 M3 ZCP
Join Date: Apr 2012
Location: NYC NJ CT PA FL

iTrader: (3)

Garage List
Quote:
Originally Posted by proTUNING Freaks View Post
UPDATE: Version 0.9.28 pushed out to the Web and Google Play Store, iOS is under Apple's review and should be up in about 24 hours.

Changes in this release include:

- Diagnostic screen available now in offline mode, requires OBD Agent update (version 0.9.28)
- Space and performance optimization
- Enhanced Account Activation
- Updates for upcoming custom tuning and editor

We've started a Facebook group recently called 'bootmod3 enthusiasts' for those that prefer that format:

https://www.facebook.com/groups/1995370330682747
How many 'bootmod3 enthusiasts' have joined the FB group ?

https://www.facebook.com/groups/1995370330682747
__________________
F90 M5 @BM3Tuning/HCP Stg1 6.6s | 10.3@134 | 0-60 2.61s | HCP Stg2 60-130 6.1s 10.1@138
F98 X4MC

http://www.instagram.com/BMWF9XM
Appreciate 0
      10-06-2017, 11:17 PM   #109
NO_USER_
Major
No_Country
524
Rep
1,041
Posts

Drives: .
Join Date: Jan 2017
Location: .

iTrader: (2)

Custom tuning FBO (minus meth/e85/turbo), 6MT M2...on Cali 91 octane. Only on rev 2, already feels smoother. BM3/PTF support (Halim and Dzenan) is awesome. Can’t wait once she’s finalized, then can hit the dyno!
Appreciate 1
FSociety3209.00

      10-12-2017, 01:46 PM   #110
proTUNING Freaks
BimmerPost Supporting Vendor
proTUNING Freaks's Avatar
3308
Rep
1,605
Posts


Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com

iTrader: (0)

New update for those with a BM3 hardware agent box:

WIFI connectivity between the phone and BM3 device is great but wired is now supported as well!

Plug in a USB cable between the device and your phone and tether with a cable instead of Wifi. There's no longer a requirement to run WIFI for the hotspot or change the phone's name or hotspot password on your phone if you use a USB cable.

You'd enable USB tethering, plug the USB cable from the phone to the BM3 device and off you go.

Link to the latest firmware is up on the bootmod3 enthusiasts Facebook group
Appreciate 2
FSociety3209.00
NO_USER_523.50

Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:14 AM.




m2
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST