[inTgr8r]

Some of these parts were posted a few months ago before I was fully committed to going in a new direction.
This is now a complete part-out listing , my M2C will soon be departing and these need to go.

Some parts were never installed and are in new condition.
Parts that have been installed and used were literally on the car for 1.5 track days.

I am located in the GTA (Toronto) , Canada

ALL PRICES ARE IN CANADIAN DOLLARS AND BASED ON LOCAL PICK UP.

SHIPPING WILL BE CONSIDERED ON A CASE BY CASE SITUATION AT BUYERS EXPENSE.

Will be happy to discuss items or answer any questions in this thread but Please express interest by PM only.

Thanks for looking

• 2 COBRA NOGARO seats New never installed;
  Polar Blue Stitching; Black leather outer with Dinamica centre.
  SEATS PRICE: $3,900 CDN;
  ____________________________________________
• AP Racing CP9660 Kit by Essex. Front calipers and 372mm rotors kit. C/W anti-rattle and Spiegler SS brake lines.
  These were on the car for 1.5 track days and are like new.
  PRICE: $5,995 CDN;
  ____________________________________________
• Nitron R1 suspension Custom M2C Kit by OG Shark.
  SOLD;
  _____________________________________________
• 18” RE71 RS Tires;
  These were on the car for 1.5 track days and are in very good condition with lots of tread left.
  Tires: Front = 275/35 x18 Rear = 295/35 x18
  PRICE: $1,550 CDN;
  ___________________________________________
• SPL Rear Toe Arms
  SOLD
  ____________________________________________
• OG Shark Custom half cage Satin Black with Full X Brace on main hoop with corner gussets.
  Installed and then removed after the one track weekend
  PRICE: $2,250 CDN;
  ____________________________________________
• SOLO2 DL Complete with mounts.
  PRICE: $850 CDN;
  ____________________________________________
• Vorschag Camber Plates These are for 5 bolt strut towers only. They will not work for the OG M2.
  These were installed when the car was 1st purchased and were used for less than 3000kms.
  PRICE: $595 CDN;
  ____________________________________________
  
  

[inTgr8r]

Pics

[Yameister]

Interested in the Nitrons, but curious about the spring rates. Would you happen to know?

[inTgr8r]

Originally Posted by Yameister

Interested in the Nitrons, but curious about the spring rates. Would you happen to know?

Spring rates are 700f/800r
This is a custom setup developed by OG Shark at COTA

With this setup I found that there was less front end dive under hard braking and the car was better balanced on corner entry.
On exit there was more rear transfer and better traction with less oversteer.

I'm sure Jason OG Shark would be happy to elaborate further if you want more info.

[Yameister]

Originally Posted by inTgr8r

Spring rates are 700f/800r
This is a custom setup developed by OG Shark at COTA

With this setup I found that there was less front end dive under hard braking and the car was better balanced on corner entry.
On exit there was more rear transfer and better traction with less oversteer.

I'm sure Jason OG Shark would be happy to elaborate further if you want more info.

I cannot private message as I'm still new to the forum. Is there a form of communication that I can reach you with?

[OG Shark]

Originally Posted by Yameister

I cannot private message as I'm still new to the forum. Is there a form of communication that I can reach you with?

If you have any questions on the kit you can email me at jason@ogsharkmotorsport.com. There is also a thread in the suspension subforum that you can ask in as well if you would like to get feedback from someone other than the vendor. This particular setup that inTgr8r is selling is the standard spec that we still use on new kits - we have not found the need to change anything. We do have other options in spring rates though that work well with this valving. Wouldn't have any reservations about picking them up from inTgr8r either - he has always been excellent to work with.

[Yameister]

Originally Posted by OG Shark

If you have any questions on the kit you can email me at jason@ogsharkmotorsport.com. There is also a thread in the suspension subforum that you can ask in as well if you would like to get feedback from someone other than the vendor. This particular setup that inTgr8r is selling is the standard spec that we still use on new kits - we have not found the need to change anything. We do have other options in spring rates though that work well with this valving. Wouldn't have any reservations about picking them up from inTgr8r either - he has always been excellent to work with.

I trust inTgr8r . We met up for me to pick up a part from before when we both had the 718 cayman, not sure if he remembers.

[inTgr8r]

Originally Posted by Yameister

I trust inTgr8r . We met up for me to pick up a part from before when we both had the 718 cayman, not sure if he remembers.

Yes, I do remember now that you mention it.
Sending PM, LMK if it goes through.

[inTgr8r]

Jason, OG Shark
Is it possible to install the Nitrons on an OG with different Camber plates ??

[OG Shark]

Originally Posted by inTgr8r

Jason, OG Shark
Is it possible to install the Nitrons on an OG with different Camber plates ??

You can use the OG plate on the comp but unfortunately not the comp on the OG. But they are available if needed. Or you can convert to the comp rear back brace and then use the comp plates.

[inTgr8r]

Originally Posted by OG Shark

You can use the OG plate on the comp but unfortunately not the comp on the OG. But they are available if needed. Or you can convert to the comp rear back brace and then use the comp plates.

Thanks Jason!!
That makes sense.

[Thai12rr]

Are your Nitrons still available

[inTgr8r]

Originally Posted by Thai12rr

Are your Nitrons still available

They were sold but it fell through.
As of now, yes they are available.

[ZBR]

Are the Nitrons and ap9660 still available? Is there any other way I can reach to you since I am new to forum? Thanks

[inTgr8r]

Originally Posted by ZBR

Are the Nitrons and ap9660 still available? Is there any other way I can reach to you since I am new to forum? Thanks

I'll try sending you a PM with my number.

[inTgr8r]

Updated for sold items