09-04-2023, 02:15 PM | #1 |
Enlisted Member
81
Rep 33
Posts |
2019 M2C lighting issues
Hi all,
Just bought a 2019 M2C. Yesterday I noticed that my dome lighting and the ambient lighting that lights the shifter area is not working. Additionally, the radio remains white during nighttime hours as opposed to switching over to orange. My maps on the iDrive system also don't seem to switch over to the dark mode as well. I scanned the car using Bimmerlink and found these codes: 804014 Supply voltage to terminal 30L2 is missing 8041A8 Welcome Light repeat lock active 8041BF Signal from the rain sensor implausible 804415 ID transmitter (IDG): Battery undervoltage D90C10 LIN Master F: No communication D90D29 RLS (LIN slave): Missing LIN slave D90D37 Interior light unit (ILE): Incorrect variant installed D90D38 Indoor light unit (ILE): Missing LIN slave Side note: That same day, I attempted to install a Uniden R3 radar detector with a hardwire kit I had lying around. Installation was fine until the prong had broken on the ground wire. I tried to mate the prong back into the little metal sleeve it was attached to in an effort to get it to work but it would keep coming loose. Radar detector would only turn on intermittently due to the bad connection. Ended up trashing the cable and delaying the installation until a new cable arrives. Perhaps I shorted something while I was messing around in there? The car was not having these issues the day I bought it. (Which was two days ago) Gladly would appreciate any help with this. |
Post Reply |
Bookmarks |
|
|