10-24-2021, 02:50 PM | #1 |
Second Lieutenant
41
Rep 200
Posts |
18x9.5 et 20 square?
Im looking to snag some TE37s since Evasive motorsports is having a 15% discount rn. However they only have et 40 and et20 in the size and color that i want. Will et 20 square fit if im running -2.6 degrees of camber in the front and -1.5 in the rear? Will be having them on a 265/40 tire too.
|
10-24-2021, 04:27 PM | #2 |
Lieutenant
228
Rep 555
Posts |
Get ET40 and add spacers. ET20 you need -4 front -3 rear (will need arms and camber plates). Rear will be the major problem if you have stock geometry. Also try 265/35 if you don't want much camber. If you plan to run slicks they usually run wide too so be careful about that
__________________
F87 M2 Competition Sunset Orange
IG: M2C_SO |
Appreciate
0
|
11-10-2021, 09:41 AM | #3 |
Private First Class
158
Rep 130
Posts |
Im running this setup with a set of ZE40. Rears might need a bit more camber to not rub. Depending on ride height.
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|