11-30-2023, 12:57 AM | #1 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
Testing waters on my low milage 2017 BMW M2 big turbo build : Long Beach Blue 7-Speed DCT, automatic Executive package Hardtop, no sunroof 2nd owner Clean title, no accidents Title in hand, paid off Garage kept, hand washed XPel PPF front end $55,000, OBO 21,5XX milage Located in Tampa, FL, 33602 Power numbers on dyno : - Map 1 : 535whp | 510lb-ft | 93 octane / flex fuel -Map 2 : 660whp | 590lb-ft | E60 blend (Both dyno sheets provided in photos) Recent maitnance : Oil changes done every 2k miles ago. EU6 fuel injectors replaced 3k miles ago. Upgraded B58 Nexsys coil ignition and spark plug conversion kit done at 2k miles ago. Battery replaced 500 miles ago. Timeline of ownership : - April 23, 2021, I purchased my M2 that was previously big turbo’d and detune and I kept the power stock for around 3 months. - August 6th, 2021, I brought my car to ACI Dyanmix in CT to start off performance with an new wheels and tires, an upgraded intake, intercooler, stage 2 HPFP, paired with a custom 93 octane BM3 map. - January 12, 2022, With not having a car in college for 3 semester, I decided to ship my car down to Florida so I could have it for school. - June 29, 2022, After nearly a year on the new 93 octane map, I decided to bring my car to Midnite Tuning in Largo, FL to add port injection to make more power. I added a Burger Motorsports intake manifold with 750cc injectors, Motiv reflex, P3 gauge, crankhub bolt capture, oil change, and new spark plugs. After nearly a full month of dyno’ing and street testing, the car was fully dailed in. - December 12, 2022, While achieving my power goals, I finally decided to work on exterior looks and made it a goal to have my car done for Orlando Bimmer Invasion in Febraury 2023. At this time my car was brought to Reality Customs in Tampa, FL to paint match and install my GTS style hood. From there my car was brought to Accorsi Engineering in Wesley Chapel, FL to get the headlights retrofitted. Lastly the car was brought back to Tampa, FL to Kanpeki Auto Detailing for installation of PPF to my front lip and side winglets. With all of that my build was done two weeks away from the show! My story : As many of you may not know, my first car that I owned was passed down from my mother due to disability from her stage IV brain and lung cancer. This car was a 2008 Suzuki grand vitara, nothing special. Not knowing much about cars, I simply didn’t care about them and was planning on driving the car that I had for however long I needed to. Until one day the engine failed on my way to high school and I was forced to get a new car. With the help of my dad, I was very fortunate to be able to get a 2018 Audi S3 (convinced from a friend with a stage 2 FBO 2018 Audi A4). With little exposure to mods, I decided to do my homework on car parts and created a vision on how I wanted my car to look. From there I decided to create a new hobby for myself and introduce a new car build with the S3. This was a way to distract me from my turmoils and to give me something to look towards. Over a year and a half, I finished my car build within my last year of high school. Achieving exactly what I wanted : an exhaust, intake, turbo inlet, wheels, and full carbon fiber exterior. Eventually as I began to love and appreciate cars more, I decided it was time to trade my first car build for a car more driver focused and performance oriented, something that would give me more excitement. Since purchasing the M2, I have allowed myself to fully enjoy doing something that I love doing. Working on this car has given me new goals, something to work hard towards, and has allowed me to learn so much about cars in general. However, as time goes on, I’ve slowed down a lot with modification as I don’t have much I want to do. As well, with where I stand in life, I been focusing less on the cars and material things. I been gravitating my focus to mainly my family, school, and my mental health. My mother just recently went into hospice care due to another brain tumor formation and I decided to finish the rest of the semester back home in CT to take care of her. Due to this, I haven’t been paying much attention or enjoying my car as I used to. I currently been looking to switch platforms, moving onto something simpler. I’ve had plans on selling my car if the right buyer and offer came along. However, I am in no rush of selling my car and am completely satisfied for where I stand. I figured maybe another enthusiast would be interested if I listed my car. Disclaimer : I am currently away from the car until mid January, as I went back home to take care of my mother in hospice care. For all wondering, I have my buddy starting up the car once a week and milage will be the same until then. Once I get back, I will be dailying the car a few times a week around Downtown Tampa and will usually put on 20-40 miles a week depending on how often I need to use it. Additionally, I still need to install the upgraded radiator, transmission cooler, oil thermostat, strut brace, corner braces, engine cover, caps, tie bar, dress up bolt kit, Bimmer Masterpieces alcantara pieces, and arm rest. I been postponing it due to school and focus with family. *Lowballs will be ignored* *BOUGHT AS IS, NO PART OUT* *Full build excel sheet with prices provided in photos* Feel free to ask me any questions! Full mod list below : Performance - Speedtech N55 stage 3 EFR turbo kit (0.92 A/R T4 Internal Wastegate Twin Scroll BorgWarner EFR 8374 Turbo, cast exhaust manifold, Tig welded 3” stainless steel catless downpipe, RH engine mount support bracket, waterpump mount bracket, stainless steel coolant feed line and fittings, braided stainless oil feed line and billet aluminum block fittings, aluminum turbo inlet pipe, silicone turbo outlet pipe, silicone couplers, EWG bracket and linkage, required fasteners and hose clamps, V-band clamp) - Turbosmart external dual port bypass diverter valve - Thermal Zero 3” black downpipe blanket - Funk Motorsport carbon exhaust manifold blanket - Funk Motorsport carbon BorgWarner 8374 internal wastegate turbo blanket - Eventuri blue kevlar carbon fiber N55 V1 intake - Wagner Tuning competition evo III intercooler kit with boost pipe and charge pipe - CSF high perfomance aluminum radiator - CSF race-spec oil cooler - CSF race-spec dual pass DCT oil cooler - FTP Motorsport N55 oil catch tank - Dorch Engineering N55 stage 2 high pressure fuel pump - Precision Raceworks N55 stage 3 low pressure fuel pumps (dual Walbro 450) - Nexsys N55 ignition coil upgrade kit (B58 coil ignition conversion) - NGK 94201 spark plugs (0.025 gapping with B58 ignition coil conversion kit) - Mosselman F-Series N55 oil thermostat + titanium bolts + gasket and O-rings - VTT N55 crank bolt capture - VTT billet aluminum N55 crank gaurd seal - BootMod3 stage 2+ tune license + SubPar Tuning custom maps - FI Exhaust valvetronic catback system + quad titanium blue tips + FI Exhaust pro remote kit - FI Exhaust Pro OBD2 / mobile app bluetooth wireless remote upgrade kit - Motiv Motorsport Re|Flex ECU box + plug-n-play ethanol harness + pressure sensor - Burger Motorsports Phoenix Racing N55 port injection intake manifold with 750cc injectors - Ethanol content sensor - F-series upgraded fuel line - BMW 3.5 Bar TMap Kit - Turner Motorsport titanium magnetic oil drain plug - Eibach pro-kit front and rear springs - 034Motorsport BMW M2 street density line transmission mounts Wheels and Tires - 19 inch carbon graphite Vorsteiner V-FF 108, 19x9.5 et24 (front) 19x10.5 e34 (rear) + Vorsteiner valve stems - Michelin pilot super sport tires 245/35/r19 (front) Michelin pilot sport 4s 265/35/r19 (rear) Exterior - IND F87 painted side marker set (gloss black plate, long beach blue bar) - IND F87 M2 long beach blue painted ceramic coated front reflector set - IND F87 M2 long beach blue painted key hole cover - IND black painted hood and trunk roundels - Acexxon F87 M2 rear reflector insert set (horizontal slat) - AutoTecknic F87 M2 pre-preg carbon fiber headlight eyelids - AutoTecknic F87 M2 pre-preg carbon fiber grille inserts - AutoID TRE F87 M2 pre-preg carbon fiber M Performance wing mirror unit + Ceramic Pro - AutoTecknic F87 M2 smoked sequential mirror units - AutoTecknic F87 M2 pre-preg carbon fiber rear diffuser - AutoTecknic F87 M2 dry carbon competition trunk spoiler + Ceramic Pro - Bavgruppe Designs F87 M2 headlight rings (6k vision white / amber with switchback eyebrow) + welcome light harness with coding required - Accorsi Engineering LCI M2 headlights retrofit : satin blacked out housing, remove side LED hazard lamps and code them out (only have eyebrow LED hazards on), welcome harness with coding - AutoTecknic carbon fiber front arch guards - Automotive Passion carbon fiber rear arch guards - OEM BMW M2 LCI BlackLine euro spec taillights + Ceramic Pro - Blackline reverse taillight overlay kit - AutoID TRE F87 M2 pre-preg carbon fiber front lip + Acexxon front lip protector, XPEL PPF + Ceramic Pro - AutoID F87 M2 carbon fiber side blade winglets + Ceramic Pro - Suvneer Motorsports aluminum GTS hood paint matched LBB + Ceramic Pro - Faserschmiede pre-preg gloss carbon fiber GTS hood vent Interior - IND F87 M2 polar blue start / stop button - Genuine BMW DTM alcantara steering wheel - Genuine BMW M Performance dry carbon steering wheel trim - MadTrace F-chassis magnetic matte carbon carbon shift paddle set - Genuine BMW M Perfomance DCT carbon fiber and alcantara kit - IND black alcantara + polar blue stitching armrest - Faserschmiede matte textured carbon fiber pre-LCI radio trim - Bimmer Masterpieces black alcantara + polar blue stitching sun visor - Bimmer Masterpieces black alcantara + polar blue stitching M2 CS style dash pod casing - Bimmer Masterpieces pre-LCI black alcantara ventilation grid + centerback - Bimmer Masterpieces black alcantara + polar blue stitching extended knee rest - Genuine BMW M Performance carbon fiber door sills - Genuine BMW M Performance floor mats - Genuine BMW M Performance alcantara key cover - Genuine BMW M Performance stainless steel pedal kit - Genuine BMW M Performance carbon fiber gas tank cap - OEM F87 BMW M2 Competition gauge instrument cluster - P3 F87 M2 V3 OBD2 gauge (orange bars / white digits) - P3 gauge ethanol sensor - Carbonex billet aluminum anodized black hood latch handle - Suvneer Motorsports carbon fiber look cargo organizer Engine Bay - Slon Workshop F87 M2 satin carbon fiber upper tie bar - NRW F87 M2 gloss carbon fiber corner braces - Turner Motorsport N55 gloss carbon fiber engine cover with BMW M Power decal - Downstar F87 M2 raw billet aluminum dress up hardware kit - BlackLine anthracite gray fuel filter cap - BlackLine anthracite gray oil cap cover - BlackLine anthracite gray coolant expansion tank cap cover - BlackLine anthracite gray washer fluid cap cover |
11-30-2023, 08:38 AM | #2 |
Second Lieutenant
125
Rep 283
Posts
Drives: E46 M3 & LCI X3 35i M Sport
Join Date: Jul 2014
Location: South Florida
|
One of the most cohesive listings I've ever seen. Although I think the price is a little high, this thing will be an amazing deal for someone. GLWS OP and sorry to hear about your mother.
|
Appreciate
1
F87Tomei267.00 |
11-30-2023, 12:17 PM | #3 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
Thank you brother I appreciate that a lot. I figured I’d start at that price but will to take offers. I believe the price is fair considering all cost of parts, labor time, and low milage. Like I said, I’m not in urgent need to sell but if someone was interested I’d be willing, especially if I could give it to a BMW enthusiast
|
Appreciate
1
mwat125.00 |
12-01-2023, 11:55 AM | #4 |
The Seeker
13863
Rep 3,323
Posts |
I have never seen a price so out of line in all my years on Bimmerpost.
This isn't a car, it's the steal of the century. You don't need any luck with this sale. The car alone, without a single mod, is worth $40+ Amazing. |
Appreciate
3
|
12-01-2023, 01:19 PM | #5 |
Second Lieutenant
275
Rep 220
Posts |
Definitely very fairly listed imo GLWS
|
Appreciate
1
shaneguags1192.50 |
12-01-2023, 03:38 PM | #6 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
Thanks man appreciate it a lot!! I know you have been up to date with my whole mod journey so you definitely understand I believe the price is fair due to all the mods that I have done and time put into it. Countless hours on the dyno and street testing were done to get it perfect and all maitnance is up to date. I think my car would be perfect for anyone looking to get fully built car inside and out!
|
Appreciate
0
|
12-01-2023, 03:42 PM | #7 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
|
Appreciate
0
|
12-01-2023, 05:33 PM | #8 |
Lieutenant
740
Rep 483
Posts
Drives: 2018 M2 6MT
Join Date: Feb 2020
Location: San Francisco Bay Area
|
I’ve very much enjoyed following your build progress. I’m sorry to learn the reason for your decrease in activity with the build and on BIMMERPOST. You’ve been part of what makes this community great!
Whether you ultimately sell or not, best wishes in this stage of life. |
Appreciate
1
shaneguags1192.50 |
12-01-2023, 06:09 PM | #9 | |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
Quote:
|
|
Appreciate
1
jefe2000739.50 |
12-04-2023, 12:32 AM | #10 |
Second Lieutenant
135
Rep 248
Posts |
Following your builds all the way. Inspired me a lot. Best luck with the sale! As for the price, it's a steal.
|
Appreciate
1
shaneguags1192.50 |
12-04-2023, 12:42 AM | #11 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
|
Appreciate
0
|
12-19-2023, 08:50 PM | #12 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
Still testing waters, I’ve had a few offers but keeping options open
|
Appreciate
0
|
12-21-2023, 12:45 AM | #13 |
Captain
652
Rep 602
Posts |
GLWS! What’s next?
__________________
|
Appreciate
1
shaneguags1192.50 |
12-21-2023, 01:02 PM | #14 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
|
Appreciate
0
|
12-21-2023, 01:15 PM | #15 | |
New Member
3
Rep 15
Posts |
Quote:
Gotchu bro, ready to rumble for you and plenty more to do if you wanna do more🫡 just wanting cash tho, so lmk if you are interested after urs is sold, im negotiable on price as well. |
|
Appreciate
1
shaneguags1192.50 |
12-21-2023, 02:22 PM | #16 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
potentially, not sure if I like the cognac interior tho also, was thinking about a top mount single down the road if I were to get a B58
|
Appreciate
0
|
12-21-2023, 03:53 PM | #17 |
Brigadier General
2283
Rep 4,146
Posts |
Family first - I offer prayers to your family. I think you and I spoke (on the forum) about making time for the things that matter in life and how priorities change - cars come and go, family is for a lifetime.
I wish you the best with the sale - and some advice - I would NOT install that CSF radiator, it's worse than stock.
__________________
Mods: Yes.
|
Appreciate
1
shaneguags1192.50 |
12-21-2023, 06:28 PM | #18 | |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
Quote:
|
|
Appreciate
0
|
03-19-2024, 09:04 PM | #19 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
bump, still taking offers. may be upgrading to a G87 BMW M2 or 8Y Audi RS3
|
Appreciate
0
|
03-20-2024, 09:08 AM | #20 |
Private
17
Rep 56
Posts |
bumping this for ya, insane build doesn’t look like any shortcuts were taken
|
Appreciate
1
shaneguags1192.50 |
03-20-2024, 09:12 AM | #21 |
New Member
9
Rep 7
Posts |
Gorgeous car, such a clean example of an OG M2!
|
Appreciate
1
shaneguags1192.50 |
03-20-2024, 09:54 AM | #22 |
Major
1193
Rep 1,244
Posts
Drives: 2017 Big Turbo BMW M2
Join Date: May 2021
Location: Tampa, FL
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|