[Twonice2485]

     Featured on BIMMERPOST.com

1E5A20-Engine torque limit: maximum target torque permanently exceeded, car has no power what's so ever, what is this code?

[Silverlining_m2]

https://bmwfault.codes/XMLDiagView?d...AzADMAMwAwADQA


I dont know if you saw this website or not. It says dme reset is needed. My best guess is that your tune isn't raising the default max tq number and you're exceeding the factory permitted level. I would contact your tuner or tune provider.

[Twonice2485]

Originally Posted by Silverlining_m2c

https://bmwfault.codes/XMLDiagView?doc=MgAwADAAMAAwADAANgA0ADAAMAAzADMAMw AwADQA


I dont know if you saw this website or not. It says dme reset is needed. My best guess is that your tune isn't raising the default max tq number and you're exceeding the factory permitted level. I would contact your tuner or tune provider.

Thank you for the info!!!!

[Twonice2485]

Originally Posted by Silverlining_m2c

https://bmwfault.codes/XMLDiagView?doc=MgAwADAAMAAwADAANgA0ADAAMAAzADMAMw AwADQA


I dont know if you saw this website or not. It says dme reset is needed. My best guess is that your tune isn't raising the default max tq number and you're exceeding the factory permitted level. I would contact your tuner or tune provider.

My dme was bricked but repaired with success and I flashed it to stock, reset adaptions and I'm still getting the same issues smh

[Silverlining_m2]

Originally Posted by Twonice2485

My dme was bricked but repaired with success and I flashed it to stock, reset adaptions and I'm still getting the same issues smh

Brutal. What did MHD say?

[Twonice2485]

Originally Posted by Silverlining_m2c

Brutal. What did MHD say?

They asked me to screen shot a picture of any dme codes and send a debug file, but nothing from them after that

[Twonice2485]

Originally Posted by Silverlining_m2c

https://bmwfault.codes/XMLDiagView?doc=MgAwADAAMAAwADAANgA0ADAAMAAzADMAMw AwADQA


I dont know if you saw this website or not. It says dme reset is needed. My best guess is that your tune isn't raising the default max tq number and you're exceeding the factory permitted level. I would contact your tuner or tune provider.

Late update, but better late then never. I went to bmw and put their software back on and solved the issue, car is back to normal, thanks