[ronin1k]

apparently the front of the car sits lower with the camber plates, here is picture of my car with GC camber plates, otherwise all stock suspension

[DrKevM5]

Or it may just appear to be lower, as the upper leading edge of the tire is canted further creating a shadow.

[ronin1k]

yeah that's what I thought once I noticed the change, but actually have measured the car height of the ground, it sits a half inch lower in the front, and then a simple geometry rule supports that - changing the angle will affect the height, eg if camber was changed to 45' will it be much closer the ground?

[MR RIZK]

The closer the top of the struts move to the centre of the car the lower the car will be. I didn't think it would be that much though for the amount of camber dialled in. Do u know if the GC stack height is less than the oem hats?

[ronin1k]

yep the GC plates and the stock strut mounts have exactly the same stack height, I had them side by side, I'm really happy with the outcome, I rechecked again the difference between the front and rear height (measuring from the rocker panel) is 3/4"