[Maximus_M2]

Any pics of black/satin black/glossy black?

[Expert@ApexWheels]

Originally Posted by Maximus_M2

Any pics of black/satin black/glossy black?

The sample sets brought over for BMW were all brushed clear, so I don't have 19" BMW examples in Satin Black, but here are a few 18" shots and a few other photos from other chassis:

VS-5RS Satin Black Gallery / EC-7RS Satin Black Gallery

I hope this helps!

-Tom

[Maximus_M2]

I assume you can use the BMW center caps? Are these more concave in shape over the BMW 763M rims? Thanks.

[cvitt]

Can normal bolts being used ?

I'm totally not fan of the Japanese like bolts of the first picture on the m3 …

[Expert@ApexWheels]

Originally Posted by Maximus_M2

I assume you can use the BMW center caps? Are these more concave in shape over the BMW 763M rims? Thanks.

Yes, standard BMW centercaps will snap in to these wheels. Concavity is a more difficult question to answer as we are offering a number of fitments that can work on the M2 and there isn't a straight measure of concavity we can use to compare all of the Sprint wheels against the 763Ms. On the whole, to my eye the 763Ms look to be comparable to our "profile 2" category of wheels which for the M2 include 19x9 ET30 & 19x9.5 ET28. Our profile 3 wheels look a bit deeper to me and includes 19x9.5 ET22, 19x10 ET40, 19x10.5 ET45, and 19x11 ET44.

Comparison:

Front 763M 19x9 ET29:

Front VS-5RS 19x9.5 ET28 Profile 2:





Rear 763M 19x10 ET40:



Rear VS-5RS 19x11 ET44 Profile 3:

I hope this helps!
(photo credit for 763M: Shopbmwusa.com)

Originally Posted by cvitt

Can normal bolts being used ?

I'm totally not fan of the Japanese like bolts of the first picture on the m3 …

Yes, the wheels are designed to be compatible with the OE BMW bolts as long as you are not using spacers. If you do decide to use spacers, you can also simply run extended-length bolts as well, but most of these fitments were optimized for the M2 and don't need spacers.

-Tom

[Dutch Devotion]

Originally Posted by ApexRaceParts

Please let us know how it fits up front as I want to get this clearance nailed down or at least more data points to have on file.

-Tom

Hi Tom,

Just ordered my VS-5RS 19" 9.5/10.5 satin blacks in the Netherlands (via Baanvelgen) in the plug and play version with the Cup2 wrapped in the sizes 265/295 and fitted under my HS M2comp.

Will keep you posted, looking very much forward to fitting them to the car (HS M2comp), will provide you the promised feedback in regards to clearance of the MPE suspension kit.

Thanks
Erik

[ApexWheels]

Additional Photos of the HS car are featured on our new forum post here: Full Feature Thread

[Expert@ApexWheels]

Despite our 19” Sprint Line Group Buy coming to an end, we aren’t fooling around. We have another stellar video showcasing our new Forged 19” Sprint Line wheels this time on a clean track-ready F80 owned by our friend Spencer.

Looking for the widest possible fitment without any fuss? Our 19” Staggered F8X M3/M4 specific fitment can do just that, allowing for a 10” front and 11” rear wheel as a direct fit on a completely stock vehicle. Pair that with a 275 width front and 305 width rear tire and you're ready to carve up your local canyon roads or hit the track and set a new PB.

With only 4 days left, don’t miss your chance to pledge for a set of these 19”s

Wheels and Tires:

APEX VS-5RS in Brushed Clear
19x10” ET25 w/ 275/30-19 Michelin PS4S
19x11” ET44 w/ 305/30-19 Michelin PS4S

APEX EC-7RS in Brushed Clear
19x10” ET25 w/ 275/30-19 Michelin PS4S
19x11” ET44 w/ 305/30-19 Michelin PS4S

Suspension:

MCS 1Way NR coilovers
Ground Control camber plates
5in 2.25" Front spring w/ helper
SPL Front Arms (minus lower arm)
SPL rear control arms (all replaced)

Brakes:

GiroDisc oversized front rotors

Alignment:

Front: -3.8° camber / 0° toe
Rear: -1.9° camber / 4mm toe in

[Expert@ApexWheels]

F82 M4 competition finished in an individual spec Imola red? Yes please! Through in-depth on car testing as well as laser scanning of every OEM brake kit offered, our 19” F8X specific fitments clear even the massive CCB/2NH calipers with room to spare. All while maximizing spoke concavity and preserving the ideal offsets needed for peak performance as well as a nice aggressive appearance.

Our 19” Sprint Line Group Buy ends tomorrow at midnight. Join the over 300 other enthusiasts that have pledged for a set of these wheels to lock in the deepest discount we’ll offer on a set anytime soon!

Wheels and Tires:

APEX VS-5RS in Brushed Clear
19x10” ET25 w/ 275/30-19 Michelin PS4S
19x11” ET44 w/ 305/30-19 Michelin PS4S

APEX EC-7RS in Brushed Clear
19x10” ET25 w/ 275/30-19 Michelin PS4S
19x11” ET44 w/ 305/30-19 Michelin PS4S

Original Build/Spec:

- 2018 M4
- Competition Package
- Carbonstructure/Dakota Leather interior
- Individual Imola Red II
- 6 speed manual
- Carbon fiber roof
- M Performance carbon fiber mirror caps
- M Performance carbon fiber front attachment (lip and splitters)
- M Performance flow through spoiler

Interior:

- M Performance V2 steering wheel
- M Performance dry carbon fiber steering wheel trim
- M Performance carbon fiber / tri-stitch Alcantara e-brake and boot
- M Performance Alcantara armrest
- M Performance V2 shifter with tri-stitch Alcantara boot
- IND painted start/stop button with bezel
- Turner Motorsport polyurethane shifter bushing
- Hardwired Valentine One V2 radar detector

Exterior:

- IKON Adaptive LED headlight retrofit
- Replica V-style three piece diffuser
- Replica (VLAND) GTS taillights
- ARM Motorsport 90mm exhaust tips
- IND painted front reflectors
- IND painted hood and trunk roundels

Suspension/Brakes/Driveline:

- Macht Schnell Competition Sport lowering springs
- F80 M3 CCB calipers
- M2 Competition (2NH) rotors and pads
- Castrol SRF brake fluid
- Motul Gear Competition differential fluid
- Stock alignment specs (waiting to do upgraded arms and adjustable sway bar links to corner balance)

Engine:

- Stock tune
- ARM Motorsports resonated downpipes
- MAD single midpipe with active brace
- SSR charge pipes
- BMC drop-in filters

[MeinZwei]

I filled out the configurator in the group buy at least 4 times. F87 M2C and I'm looking at 19x9.5, ET28 and 19x10.5 ET 45. Will likely go with 255/30-19 and 295/30-19. Will this combination fit with no rubbing and stock alignment specs?

[Expert@ApexWheels]

Originally Posted by MeinZwei

I filled out the configurator in the group buy at least 4 times. F87 M2C and I'm looking at 19x9.5, ET28 and 19x10.5 ET 45. Will likely go with 255/30-19 and 295/30-19. Will this combination fit with no rubbing and stock alignment specs?

Yes, it should certainly be a direct fit with those specs and the 255/30-19s. Our front tire recommendation is typically a 265/30-19 which is a direct fit with most tires and the stock alignment as well.

-Tom

[Ratcher]

I would SO buy these wheels if I could get them homologated in Germany. So sad.

[tokki]

Is there any set up for a completely stock M2C where profile 4 is possible in the rear?

[Expert@ApexWheels]

Originally Posted by tokki

Is there any set up for a completely stock M2C where profile 4 is possible in the rear?

There is not. The rear offset requirements of the M2 limit the rear profiles for direct fit options to profile 3 only. Lower offset fitments, which are required for profile 4 wheel designs, are more aggressive and would not fit this chassis without significant modifications.

-Tom

[ApexWheels]

While our 19” Sprint Line Group Buy has ended, we are still working on creating and editing content showcasing our latest wheel designs. We should have production wheels beginning to ship out to customers over the next few weeks and another huge thank you goes out to the BMW community for helping make this one of our most successful Group Buys ever.

Here are a collection of links to new feature threads showcasing these new designs. Select the images below to view the unique specs, modifications and video/photo showcases of our newest Forged wheel lines.

Imola Red F82 M4

Atlantis Blue F80 M3

Black F32 435i

[blau3er]

Any photos of 19x9 ET30 and 19x10 ET40?

[AlpsRider]

Originally Posted by blau3er

Any photos of 19x9 ET30 and 19x10 ET40?

I can show some soon since my wheels with those specs in Anthracite are due to be delivered tomorrow!

[blau3er]

Originally Posted by AlpsRider

I can show some soon since my wheels with those specs in Anthracite are due to be delivered tomorrow!

Awesome! Are you sticking with 245/35 and 265/35?

[AlpsRider]

Originally Posted by blau3er

Awesome! Are you sticking with 245/35 and 265/35?

Yes, my stock size Cup2s still have good tread. When they wear out I may go up to 255/35, 275/35 depending on what tire I decide to get.
I just ordered ceramic coating to seal those babies up.

[chip_dip19]

Good news is the wheels have arrived and tires have been mounted. Bad news is having to wait for my wheel coating to arrive before installing on the car.

[aftercorbu]

My group buy vs-5rs wheels arrived earlier than expected today! Also taking to be ceramic coated before mounting. I’ll have pictures up next week. Went with the M2C stock fitment in anthracite for a HS car. Going to use the existing tires for now.

[SteveD2]

Originally Posted by chip_dip19

Good news is the wheels have arrived and tires have been mounted. Bad news is having to wait for my wheel coating to arrive before installing on the car.

Man, these look so good! Can't believe I missed out on the group buy