12-28-2018, 10:10 AM | #1 |
Lieutenant
426
Rep 538
Posts |
Titanium Brake Shims 2NH M2C Brakes (M3/M4 CCB)
I posted this in the track section but figured I should probably put it here as well since this is M2C specific.
I found titanium shims for the rear pad shape since it's shared among different manufacturers but nothing for the fronts. So I am in talks with a company that will make a batch of 5 sets (or more if there is interest) so I need 5 buyers to get it done. Is anyone interested? The titanium shims should drastically reduce heat transfer between the pad and the caliper pistons (and therefore fluid). Seems like a no brainer. The rears go for $80 and the fronts $120 including shipping. If I can get 5 people I will email them to make a batch, just need to know if you want Fronts only or fronts and rears. This is for the 2NH "big" brakes (M2C,M5,X5M) and I think they also fit the CCB M4 calipers.. Last edited by Proctor750; 04-08-2019 at 10:13 AM.. |
03-03-2019, 12:47 PM | #4 |
Major
1774
Rep 1,262
Posts
Drives: BMW 1M
Join Date: Apr 2016
Location: UK
|
Could be interested for my CCB calipers
Any images of the rear shims? |
Appreciate
0
|
03-03-2019, 02:39 PM | #5 |
Major General
7332
Rep 7,293
Posts |
|
Appreciate
0
|
03-03-2019, 09:51 PM | #6 | |
Private
70
Rep 72
Posts |
Quote:
__________________
2020 M2 Competition - Silver/6MT/Exec // 2019 Merc-AMG GLA45 // 2004 Audi TT 3.2 VR6 // 2015 Porsche Cayenne Diesel (off-road modded) //2007 Audi RS 4 (AWD/6MT/NA-V8!!!) // SOLD: 2017 AMG GLA45 //2018 034Motorsport Stg-2 E85 TT RS Nardo Grey // 2013 034Motorsport Stg-2 TT RS Suzuka Grey // 2013 034Motorsport Stg-2 (de)allroad(ed) Glacier White // 2007 Z4MC Space Grey/Red // 2006 Z4MC Imola Red/Black
|
|
Appreciate
0
|
03-04-2019, 08:38 AM | #7 |
Major
1123
Rep 1,083
Posts |
I'm interested in a full set (front & rear)
Thanks!
__________________
|
Appreciate
0
|
03-05-2019, 11:02 AM | #8 |
Lieutenant
426
Rep 538
Posts |
Awesome, I will email them back to let them know there is at least 5 people of interest. Will report back shortly.
Thanks. Also - pistons may be titanium - not sure BUT adding the plate will just further decrease the thermal transfer to the fluid. |
Appreciate
0
|
03-05-2019, 11:10 AM | #9 |
Lieutenant
426
Rep 538
Posts |
Here is who I have so far:
joseyu - Yes (front or front+rear)? COChris - Yes Front+Rear GreatWhiteM2 - Yes Front+Rear troysico - Yes (front or front+rear)? ashtaron14 - Yes Front+Rear hansomatic - Maybe Front+Rear VTBoss302 - Yes Front+Rear joseyu - Maybe for brembo bbk (different shims) 2PUTT - Yes Front Only Project_F87 - Yes Front+Rear Can you fellas specify if you want fronts only or both? I'll see if I can get pictures of the rears (fronts don't exist yet obviously). Last edited by Proctor750; 03-07-2019 at 02:16 PM.. |
Appreciate
1
M2C_PLUS1774.00 |
03-05-2019, 02:12 PM | #10 |
Captain
889
Rep 739
Posts |
|
Appreciate
1
Proctor750426.00 |
03-05-2019, 02:12 PM | #11 | |
Lieutenant
426
Rep 538
Posts |
Quote:
BMW uses a generic rear pad shape and a bespoke front pad shape. Here is a link to a set for a mustang: https://www.opmustang.com/store/p240...-_Front.html#/ Same guys I emailed to create ours. |
|
Appreciate
1
M2C_PLUS1774.00 |
03-05-2019, 03:52 PM | #12 |
Lieutenant
429
Rep 433
Posts |
I'll take a complete set (front and rear) if still available
|
Appreciate
1
Proctor750426.00 |
03-05-2019, 05:14 PM | #13 |
Private First Class
66
Rep 115
Posts |
Full set of front and back for me. Thanks!!!
|
Appreciate
1
Proctor750426.00 |
03-06-2019, 09:54 AM | #14 |
Captain
512
Rep 943
Posts |
Interested with fronts.
__________________
|
Appreciate
1
Proctor750426.00 |
03-06-2019, 03:25 PM | #15 |
Captain
1231
Rep 845
Posts |
Interested for fronts and rears!
__________________
Instagram: @Project_F87
|
Appreciate
1
Proctor750426.00 |
03-06-2019, 03:46 PM | #16 | |
Major
1774
Rep 1,262
Posts
Drives: BMW 1M
Join Date: Apr 2016
Location: UK
|
Quote:
|
|
Appreciate
1
Proctor750426.00 |
03-07-2019, 08:34 AM | #17 |
Lieutenant
426
Rep 538
Posts |
Good news, they are going to push forward with a batch for us. To make everything easy they are going to add a page on their site for us to purchase from. I will update you guys once I hear back when the link is ready.
Update: as of 3/11/19 it looks to be about 3-4 weeks out. They will have to match up a test set to oe pad then schedule the sets to get cut. Nice work! Last edited by Proctor750; 03-11-2019 at 10:17 AM.. |
Appreciate
3
|
03-31-2019, 07:00 AM | #18 |
Lieutenant
426
Rep 538
Posts |
Progress. These guys have been busy but here is a link to buy the rears in stock now and preorder the fronts.
Once they get the pre orders in they will send the order out for them to get cut. Link: https://www.opmustang.com/store/c39/..._-_Brakes.html FROM OPTIMUM: "I have added the shims, and brake pads as well. Rear shims are in stock, pads are usually 1-2 weeks out depending on how busy G-LOC is, the rears fit several models so they may keep them on the shelf. GS-1 Compounds for the street guys that hate brake dust and noise. G-LOC GS1's are a very high performing street pad. Brake dust wipes off. You can swap directly from the GS-1 to any of their track compounds on the same rotor. Most of our Customers run the GS1 for Daily Driving and swap to an R compound for the track day. Link to the BMW Section on our website...work in progress. Because people do not like reading I took a picture of the OEM front brake pad with our shim we use on the Mustang GT350 front brake so people can get an idea what it will look like. This IS NOT the shim we are having made for the M2 Comp! The sooner I know how many people are really interested (Pay for them) the faster they can get scheduled. Let us know if we can do anything else. I will look into other products to see what is available, Obviously we have brake fluids etc. I will check with Goodridge to see if they have Braided lines done for the cars yet." Let me know if you want me to ask anything else. Last edited by Proctor750; 03-31-2019 at 07:11 AM.. |
Appreciate
0
|
03-31-2019, 09:15 AM | #19 | |
Major
1123
Rep 1,083
Posts |
Quote:
FYI Goodridge have braided lines for the M2C because they are identical to OG M2/M3/M4 Thanks, Sunny
__________________
|
|
Appreciate
0
|
04-01-2019, 12:47 AM | #20 |
Lieutenant
429
Rep 433
Posts |
Order placed for front and rear Ti Shims
Thanks for making this happen |
Appreciate
1
Proctor750426.00 |
04-01-2019, 11:43 AM | #21 | ||
Lieutenant
426
Rep 538
Posts |
Quote:
From Optimum: Quote:
Last edited by Proctor750; 04-02-2019 at 09:12 AM.. |
||
Appreciate
0
|
04-08-2019, 10:02 AM | #22 |
Lieutenant
426
Rep 538
Posts |
Guys,
I really want this to work as I think these shims will really help add to a solid package for the 2NH brakes on the M2 comp (and M4 CCB). These guys haven't gotten the required 10 minimum orders (I think only one or two people have even ordered so far) and if they can't get the 10 they will have to back out all together. They did a fair amount of work on their end to help me make this happen so hopefully those that mentioned interest will act on it soon. If anyone in this list is still interested please visit: https://www.opmustang.com/store/c39/..._-_Brakes.html to get your orders in and make this happen! #COChris - Yes Front+Rear #GreatWhiteM2 - Yes Front+Rear #troysico - Yes (front or front+rear)? #ashtaron14 - Yes Front+Rear #hansomatic - Maybe Front+Rear #VTBoss302 - Yes Front+Rear #joseyu - Maybe for brembo bbk (different shims) #2PUTT - Yes Front Only #Project_F87 - Yes Front+Rear #Proctor750 - Yes Front+Rear My understanding is that they will probably move on from this if we can't make it happen by the end of the week. |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|