09-08-2019, 02:54 PM | #1 |
Private First Class
280
Rep 175
Posts
Drives: 2020 M2 Comp.
Join Date: Aug 2019
Location: Los Angeles
|
M Performance Mirror Caps (not secure)
Just removed one of my factory mirror caps and attempted to install the M Performance Cap. I noticed it wasn't secure towards the bottom. Now comparing to the Factory part there's no hook and the bottom section. Is this normal? I'm thinking this is going to fall off. Something doesn't look right here. This was purchased from GetBMWParts.com
https://www.getbmwparts.com/oem-part...IFJlc3VsdHM%3D I've reached out to GetBMWParts.com waiting for their response. Last edited by MVista; 09-08-2019 at 03:52 PM.. |
09-10-2019, 02:37 PM | #2 |
Second Lieutenant
95
Rep 251
Posts |
the part code it is absolutely correct. did you try doing the installation process again? did you remove the morro for installing it to be sure that every clip was in place?
|
Appreciate
0
|
09-10-2019, 04:47 PM | #3 |
Private
63
Rep 72
Posts |
Looks correct based on photos cross referenced here.
https://www.ecstuning.com/b-genuine-...t/51142348099/
__________________
Current: 2020 HS M2C DCT
Past Bimmers: e46 M3 6MT, e90 328i, e46 323i, e30 325is |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|