[SM2]

Anyone running the new VRSF sport cat downpipe? Curious about quality and whether anyone is getting cel light.


https://www.vr-speed.com/vrsf-cerami...2-f33-f88.html

[cecaa850]

I don't see a "no cel" guarantee so I'd pass.

[cecaa850]

I don't see ant support brackets on it either.

[mike@x-ph.com]

Originally Posted by SM2

Anyone running the new VRSF sport cat downpipe? Curious about quality and whether anyone is getting cel light.


https://www.vr-speed.com/vrsf-cerami...2-f33-f88.html

It's a popular product for us. Perfect for a customer looking for the additional power from higher flow downpipes without the extra noise or fuel smell you get from the catless option.

I recommend using this downpipe with a flash tune

[SM2]

Originally Posted by mike@x-ph.com

It's a popular product for us. Perfect for a customer looking for the additional power from higher flow downpipes without the extra noise or fuel smell you get from the catless option.

I recommend using this downpipe with a flash tune

How about running one without a tune, I know the fabspeed has pretty much a guaranteed no Cel light.

[mike@x-ph.com]

Originally Posted by SM2

How about running one without a tune, I know the fabspeed has pretty much a guaranteed no Cel light.

You do not get a " no CEL guarantee " with this downpipe.

[SM2]

Originally Posted by mike@x-ph.com

You do not get a " no CEL guarantee " with this downpipe.

Not one customer has had an issue? This product somewhat new?

[mike@x-ph.com]

Originally Posted by SM2

Not one customer has had an issue? This product somewhat new?

What do you mean by not one customer had an issue?

[SM2]

Originally Posted by mike@x-ph.com

What do you mean by not one customer had an issue?

With CEL light, sorry.

[mike@x-ph.com]

Originally Posted by SM2

With CEL light, sorry.

The downpipe does not guarantee a no CEL. There is a possibility that you get check engine light is installed on a stock car

[TemjinX2]

from past reviews its pretty much a 50 50....if you want the no cell i would probably get the active autowerks one...i believe its 49 state certified excluding cali

[mez235]

Originally Posted by mike@x-ph.com

It's a popular product for us. Perfect for a customer looking for the additional power from higher flow downpipes without the extra noise or fuel smell you get from the catless option.

I recommend using this downpipe with a flash tune

Sorry to bring up an on thread Mike but I've recently just had a VRSF sports cat installed on my 2015 M235i and the fitter had two problems.

One of them being that there's no bracket and the other being when fully tightened the cat to the manifold doensn't line up perfectly - thus eventually creating a possible leak. (potentially)

Do you know of any way around this or if you can possibly advise me at all?

Any help would be great!

[mike@x-ph.com]

Originally Posted by mez235

Sorry to bring up an on thread Mike but I've recently just had a VRSF sports cat installed on my 2015 M235i and the fitter had two problems.

One of them being that there's no bracket and the other being when fully tightened the cat to the manifold doensn't line up perfectly - thus eventually creating a possible leak. (potentially)

Do you know of any way around this or if you can possibly advise me at all?

Any help would be great!

We do not offer VRSF products anymore, please contact them directly.

[CalAcacian]

For anyone still looking for a sportcat, I would highly recommend the FabSpeed. It has a bracket, and I haven't had any CEL issues with 4,000 miles on it over the last few months.

[Wheats1]

I'm using that exact sportcat. Absolutely zero issues during install and after. Customer service is really good too. Add a tune though to get max benefits

[SM2]

Fabspeed sportcat! No CEL so far! 3,000 miles.

[AmuroRay]

Originally Posted by mez235

Sorry to bring up an on thread Mike but I've recently just had a VRSF sports cat installed on my 2015 M235i and the fitter had two problems.

One of them being that there's no bracket and the other being when fully tightened the cat to the manifold doensn't line up perfectly - thus eventually creating a possible leak. (potentially)

Do you know of any way around this or if you can possibly advise me at all?

Any help would be great!

Try to get it lined up before you tighten it at all, but reach out - Curious for an answer

[cecaa850]

Originally Posted by mike@x-ph.com

We do not offer VRSF products anymore, please contact them directly.

I don't know or really care why but good for you.