[willym04]

Hello as the title states on my 2018 m2 the speedo needle is resting below zero.

This happened after I opened it up to adjust the tach as its a canadian car and the person who imported replaced the insert poorly.

However, now I am having this issue.

Is there away to reset the position?

I've tried doing it manually but when the car is started the needle sweeps to below zero.

[bmwstephen]

when the car starts up at ignition, do you see all the needles turn all the way clockwise before resetting back to its original position? It is a standard test procedure all cars do on startup.

If not, you likely need to recalibrate it or replace the gear.

[willym04]

Well I figured it out if anyone else ever has this issue.

You just turn the needle counterclockwise till you feel resistance then keep going and set it at the 0 position