[detroitm2]

Originally Posted by seanyx11

I got the Dorch stage 2 HPFP, Fuel-it stage 2 LPFP & bluetooth ethanol analyzer installed and flashed bootmod3 to the e30 tune for now until I can get Halim's e40 tune.

How long did the install take ya? Did you get the tool needed to remove the LPFP From fuelit?

[seanyx11]

Originally Posted by detroitm2

How long did the install take ya? Did you get the tool needed to remove the LPFP From fuelit?

I didn't do it myself, too many ways to screw up with fuel pumps & lines. It took the shop about 8 hours to install just HPFP, LPFP & splicing in the flex fuel sensor & analyzer to the stock fuel line. If I had them replace the lines that came with the kit, they would've had to drop the tank to run the line which would've taken another 4-5 hours

I'm sure if they had done it before, it could've taken way less time. My guess is a shop that has done this before would take 4-5 hours.

[dtmurf]

Originally Posted by 5.M0NSTER

So I found some footage of the same Senna on the Ring. Not yesterday, but similar conditions. Also same driver as yesterday. By my counting we're looking at 7:17ish lap. WOW.

Very impressive, he's not afraid to push it, that's for sure! I couldn't believe he kept f*&%ing with the voice command popup lol

[WOT Bimmer]

Installed Future Classic 10mm spacers, applied ceramic coating to calipers and wheels, and installed a CF rear wing.

Btw, has anyone noticed that "M2" is stamped at the top of the front wheel wells?

[TripleU]

Installed a Racing Dynamics strut brace today. Got it a few days ago but didn't install it since it was meant for stock top hats and not my Vorshlag camber plates so I ordered some washers/shims on Amazon which got here today.

[Mosfry]

Added alcantara armrest, gauge cluster and extended knee pads to both sides. Driving feels a lot better as I'm constantly in contact with all the nicer materials now. Just feels like a nicer car to drive and be in. Especially with all the interior mods combined. Should have been stock. I was never blown away with the stock base interior. Think I'll do the subs next to go with the Etons I already replaced.

[5.M0NSTER]

Due to placing myself at a wrong part of the track, I got an opportunity to practice CPR. Correct-Pause-Recover. Had to do it twice in rapid succession, to save it from resulting 100+ mph skid.

[Hawkdriver]

Originally Posted by 5.M0NSTER

Due to placing myself at a wrong part of the track, I got an opportunity to practice CPR. Correct-Pause-Recover. Had to do it twice in rapid succession, to save it from resulting 100+ mph skid.

Nice catch! Not a whole lot of run off room for error at that speed!

[Shahaf2911]

It's such a small detail but a really nice one!
I've ordered it from AliExpress took about a month and it's just 3 bucks (compared to you know who, who charges 30$ ) so I gave it a try and it's really nice! And it lights up with the red light.

[TripleU]

To match my Racing Dynamics front brace, I got a KC Designs rear brace which bolts inside the trunk.

[WOT Bimmer]

Tinted windows from the great guys at Esoteric Detailing!

[Fined]

$30 ASD bypass for the win!

[bimmer98]

Had IND paint me a red steering wheel trim piece to match the start button. Also new is the OEM Alcantara Performance wheel. Really love this wheel! Feels great in hand and has some great features for lap times, temps, and RPM. The 1/4 mile mode offers a drag strip light tree using the RPM lights. It gauges reaction time and 1/4 time. I don’t have the track transponder hooked up to record lap times automatically, but by push of button in race mode it will keep lap times as they are completed and store fast laps.

The red is maybe a little off in the picture, but it’s the same red on the start button with a gloss finish. I’m Alpine White with a fair amount of carbon fiber, so the red inside and red tow hook gives it a little color.

[DanG]

I did nothing. It was a cold rainy day.

[SebsM2]

Originally Posted by WOT Bimmer

Tinted windows from the great guys at Esoteric Detailing!

What tint level is this? It looks great

[WOT Bimmer]

Originally Posted by andre3er

What tint level is this? It looks great

Thanks! It is 18%, which is actually what most rear vehicle windows come with from the factory. It is perfect. It also slightly changed the acoustics - almost "echoey" on the interior.

[WOT Bimmer]

Installed the Autotecknic rear diffuser from the guys
@ind-distribution. Fitment was 8.5/10. The holes aligned, but not enough to get the center pin back in. There was also a tiny gap on both sides where the diffuser comes down to meet the rear quarter panel. Hardly noticeable. Overall, I think it's slightly overpriced, but happy I got it.

[VisualEcho]

Originally Posted by WOT Bimmer

Installed the Autotecknic rear diffuser ..

That first pic, super clean, clean wheels, tire dressing, and dusty tread, just great.

[Aust350z]

Originally Posted by WOT Bimmer

Installed the Autotecknic rear diffuser from the guys
@ind-distribution. Fitment was 8.5/10. The holes aligned, but not enough to get the center pin back in. There was also a tiny gap on both sides where the diffuser comes down to meet the rear quarter panel. Hardly noticeable. Overall, I think it's slightly overpriced, but happy I got it.

Is that an OEM CS spoiler?

[SebsM2]

Originally Posted by WOT Bimmer

Installed the Autotecknic rear diffuser from the guys
@ind-distribution. Fitment was 8.5/10. The holes aligned, but not enough to get the center pin back in. There was also a tiny gap on both sides where the diffuser comes down to meet the rear quarter panel. Hardly noticeable. Overall, I think it's slightly overpriced, but happy I got it.

You aren't wasting any time! Excited to see what else you have in store for this car.

[VisualEcho]

Originally Posted by Aust350z

Is that an OEM CS spoiler?

eBay CS type.

[WOT Bimmer]

Originally Posted by andre3er

You aren't wasting any time! Excited to see what else you have in store for this car.

Admittedly, I have been blowing through several minor changes and having too much fun. I'll probably break for winter now. The mod bug is a hard one to fight off.

Originally Posted by Aust350z

Is that an OEM CS spoiler?

As VisualEcho said, it's an eBay CS replica. It was really the perfect scenario because I typically don't like eBay stuff - just too many issues. However, I wasn't interested in spending $1000+ for the OEM. This one was super cheap, and the looks are spot on for me. Definitely don't want to put cheap parts on a nice car, but this replica fit the bill perfectly. The weave also matched the Autotecknic mirror caps and diffuser perfectly.