08-30-2019, 03:09 PM | #1 |
Second Lieutenant
31
Rep 237
Posts |
Cyba tips install on MPE
Hey everyone,
Got my M2 MPE installed today. Went with CYBA tips. Awesome quality and finish with brushed look. But I am trying to tighten and they seem loose and like they are gonna go flying off. I'm not super techy. I see the three bolts and as I tighten them I can still move the tip around with my hands and I feel like they are at max tightness. Any suggestions? Thanks |
08-30-2019, 03:16 PM | #3 |
Captain
259
Rep 699
Posts |
I would think that the nut is there to supply threads for the allen set screw however I haven't seen a set of those tips in person.
You've tightened the set screws and they're still loose? |
Appreciate
0
|
08-30-2019, 03:22 PM | #4 |
Colonel
2428
Rep 2,526
Posts |
Loosen the nut, tighten the inner bolt, tighten the nut.
The nut is there to lock the inner bolt in place. |
Appreciate
0
|
09-07-2019, 06:44 PM | #11 |
Captain
2142
Rep 754
Posts
Drives: 2022 M3 Competition
Join Date: Sep 2015
Location: USA
|
I've had my MPE w/OEM carbon fiber tips since last year on my '18 and the local dealer has finally given up on trying to fix the cold start rattle. It's embarrassing. Such a shame...
__________________
2022 M3 Comp BGM/Fiona Red, Executive, Drivers Assistant Pro, Parking Assist, 826M black wheels
(SOLD) 2018 M2 BSM LCI, DCT, Executive, Drivers Assist, CarPlay |
Appreciate
0
|
09-07-2019, 06:49 PM | #12 |
Major
1403
Rep 1,466
Posts |
Cyba tips might be an option, but I didn't like that you could see the pipe inside the tip.
The other option, that many, including me have done, is to get the M Performance knock offs from eBay for about $200 for a set of carbon tips that look nearly identical.
__________________
2018 ///M2 LCI, LBB, 6MT...
Current Performance Mods: CSF FMIC, ER CP, Fabspeed Cat, Aquamist WMI, GFB DV+, NGK 97506, BM3 (Stage 2 93 OTS), CDV delete, UCP, M2C/M3/M4 Strut Brace, M3/M4 Reinforcement Rings |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|