10-05-2023, 03:21 PM | #1 |
Second Lieutenant
275
Rep 220
Posts |
ultimate clutch pedal install help
Uninstalled most of the stock set up but ran into an issue where there is electronics blocking the clearance for the actual pedal to be removed.
Was wondering if anyone can chime in on how to navigate this properly without breaking anything. |
10-05-2023, 10:22 PM | #2 |
Second Lieutenant
275
Rep 220
Posts |
did some research, found out its rear camera control module. was able to locate one of the bolts holding it in, but cant really figure out the other one.
would like to remove it to add the clearance i need to install the new pedal easily, so if anyone can chime in if they know how to remove it safely that would be much appreciated |
Appreciate
0
|
10-05-2023, 10:43 PM | #3 |
Captain
1278
Rep 837
Posts |
I had mine installed along with the SSK and new slave cylinder so I can't offer any first hand insight. However, hopefully these two threads can help you out:
https://www.2addicts.com/forums/show....php?t=1305692 https://www.2addicts.com/forums/show....php?t=1558148 |
Appreciate
1
neonbrown274.50 |
10-06-2023, 01:50 AM | #4 | |
Second Lieutenant
275
Rep 220
Posts |
Quote:
|
|
Appreciate
1
(K)1278.00 |
10-06-2023, 09:00 PM | #5 |
Second Lieutenant
275
Rep 220
Posts |
I was able to complete it, it was actually fairly easy i just didn't know how to remove that bracket for the rear camera module.
The easy way to do this is to remove the module by unplugging the cables, and then you need to unclip the bracket from underneath (another post said you had to use a 90 degree pick tool, i got it done easily with a small flat head). You'll only be able to unclip the bracket this way. |
Appreciate
1
(K)1278.00 |
Post Reply |
Bookmarks |
|
|