05-04-2022, 11:04 AM | #1 |
Brigadier General
3069
Rep 3,016
Posts
Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA
|
Upgrade your turbo inlets - MST turbo inlets DIY
All right yall, this project is a little different in implementation as you will see, but I believe definitely worth it!
The reality is as much free flowing air as we can get into our turbo driven motors is a good thing! The OEM pipes often and in this case, do have some interesting bends and even a severe neck down into the turbos. Best solution, especially with the new Mosselman Turbo Systems turbos in my car? Upgrade the turbo intake pipes with MST inlets from Kies Motorsports! These pipes are excellent for OEM setups or upgraded turbos as well. Now in this case, I ONLY do the front pipe simply because of the changes to the turbos and the back pipe tends to slip off. Even doing just the front is an improvement, as actually it as the most severe neck down of the inlets. Check it out, and see if this works for your build as well!
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread |
05-12-2022, 08:57 AM | #3 |
Brigadier General
3069
Rep 3,016
Posts
Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA
|
Not at this time but also can't hurt to ask.. I know Kies Motorsports has/is asking them about that too.
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread |
Appreciate
0
|
05-12-2022, 05:51 PM | #4 |
BimmerPost Supporting Vendor
1907
Rep 4,891
Posts |
Plan on doing a dyno?
__________________
|
Appreciate
0
|
05-12-2022, 06:38 PM | #5 |
Brigadier General
3069
Rep 3,016
Posts
Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA
|
Whole series up on my build thread as I am dialing in my tune.
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread |
Appreciate
0
|
05-21-2022, 12:45 PM | #7 |
Brigadier General
3069
Rep 3,016
Posts
Drives: 2019 M2 Competition
Join Date: Jan 2017
Location: Maple Valley WA
|
In my case, so many things changed at once that I cannot track to that single thing.
__________________
Check out my BMW DIY Channel on YouTube! E, F and G series projects from Active Autowerke, Bimmertech, Kies Motorsports, AvinUSA, Karbonius Composites and more!
** YouTube BMW DIY Guy ** 'Nimona' G87 M2 Build Thread 'Lillith' F87 M2 Competition Build Thread |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|