11-11-2023, 10:32 AM | #1 |
Enlisted Member
7
Rep 47
Posts |
BM3 'read DME'
Hi,
Anyone have experience doing the full 'DME READ'? On BM3? I've done some research and seems it's possible to read a current tune and save it as a flash: f87.bimmerpost.comhttps://f87.bimmerpost.com/forums/sh....php?t=1484425 Basically, Car came with a BM3 tune on from previous license. when I purchased the car, came with the Stage2 Tune but no transfer of License. Therefore, I recently purchased a brand new BM3 tune (and planning to flash it back to stock to pass emissions). However, I would ideally like to save the settings of the tune that the car is currently running. However, when I try to 'Read DME' I continue to get this error. I'm trying to see what settings were in place on the car before I erase it for forever. Anyone have experience successfully reading DME before? Thanks
__________________
Isaac Kim
|
11-14-2023, 01:56 PM | #3 |
Enlisted Member
7
Rep 47
Posts |
yup, turned on to accessory mode + seat belt on and continued to get the pop up...
i'm assuming it could be because the previous llicense is still locked by the previous owner?
__________________
Isaac Kim
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|