[M2CS_6MT]

I picked up an M2CS recently and am starting to get familiar with it. Is there a way to display the oil temperature on the instrument panel? If so, how do I navigate to it?

[///MPhatic]

Push the button on the end of the left hand stalk repeatedly to cycle through all the display options until it shows oil temp.

Never drive the car hard until it hits 185°. Never.

[M2CS_6MT]

Thanks and appreciate the advice

[M3R1]

Originally Posted by ///MPhatic

Push the button on the end of the left hand stalk repeatedly to cycle through all the display options until it shows oil temp.

Never drive the car hard until it hits 185°. Never.

Once I pass the first thick like between 160 and 250 its on...

[///MPhatic]

Originally Posted by M3R1

Once I pass the first thick like between 160 and 250 its on...

That's plenty. I don't let the rpm's above 3,000 until it gets to this mark, then I let it get to 4K until it gets to 190°.

[M3R1]

Originally Posted by ///MPhatic

That's plenty. I don't let the rpm's above 3,000 until it gets to this mark, then I let it get to 4K until it gets to 190°.

I wait a lil longer...