Disable pops and bangs

SimonBam · 07-14-2019, 05:21 AM

Disabled the burbles when I got my catless DP/AA mid pipe, with the Eisenmann exhaust it was just way way too much!

I did have them at 0.6 seconds/12 AGG with BM3 and that's where I would stay if I enabled them again.

maliderosF87 · 07-14-2019, 02:24 PM

Can you disable the burbles and pops with BM3 if you have the newest ISTEP F020-19-03-530 or later? (March 2019 and onwards)

Rear a comment that it locks BM3 from applying any parameters earlier in this thread.

Urgently need a response as I have an appointment for ISTEP updating in a few days and while I would obviously prefer both, I need to code out the popcorns

doughboy · 07-14-2019, 03:02 PM

Quote:

Originally Posted by maliderosF87

Can you disable the burbles and pops with BM3 if you have the newest ISTEP F020-19-03-530 or later? (March 2019 and onwards)

Rear a comment that it locks BM3 from applying any parameters earlier in this thread.

Urgently need a response as I have an appointment for ISTEP updating in a few days and while I would obviously prefer both, I need to code out the popcorns

BM3 can't do any flashing with the latest DME update.

Just avoid any dealer updates full stop if I were you..

GoneIn4Secs · 07-17-2019, 05:41 PM

Flaps closed = no burbles

doughboy · 07-18-2019, 02:08 AM

Quote:

Originally Posted by GoneIn4Secs

Flaps closed = no burbles

Sort of, flaps closed will muffle any burbles, but the standard programming doesn't create burbles when flaps are closed.

Equally, flaps open doesn't make burbles

Daytona_550 · 08-12-2020, 10:57 AM

Fyi:

https://www.bimmerpost.com/forums/sh...php?p=26552775

No_curebimmer · 08-14-2020, 04:33 PM

Quote:

Originally Posted by Commanderwiggin

Unfortunately you can't disable the burbles by coding. You'll need to get a flash tune if you want to disable the burbles. I'm using Ecutek but there are other flash tuners available (ie. Bootmod3).

Actually you can, or rather you should be able to do that soon enough. To my knowledge, I'm one of the first beta testers of a new feature under BimmerLINK called "Sound Tuning" that turns the dang burbles off...I reached out to the BimmerCode/Link developer asking for the feature. I'm testing it out now with great success...for more info and crappie phone vids, see thread link here

https://f87.bimmerpost.com/forums/sh...0&postcount=75

Once both the developer and I are happy with our datalogs and tests, I suppose he'll push out a version update for the general public.

No_curebimmer · 08-14-2020, 04:35 PM

Quote:

Originally Posted by Daytona_550

Fyi:

https://www.bimmerpost.com/forums/sh...php?p=26552775

Aren't you part of the beta testing program as well? If I recall from the other thread, both you and I reached out to the developer around same time. If you have an Android mobile phone, you can test it out (I'm on the iOS side of the fence).

Daytona_550 · 08-14-2020, 06:00 PM

Quote:

Originally Posted by No_curebimmer

Aren't you part of the beta testing program as well? If I recall from the other thread, both you and I reached out to the developer around same time. If you have an Android mobile phone, you can test it out (I'm on the iOS side of the fence).

I already have Bimmercode so I'm waiting to hear if he will add this feature to it.

No_curebimmer · 08-18-2020, 09:14 AM

FYI...in a few weeks, look in the app store for an updated version of https://www.bimmerlink.app/.

It will have a feature to turn off the burbles (in the beta version that I've been testing it's called "Sound Tuning" - and it consistently worked for me since it was developed last week).

Westerwälder · 08-18-2020, 03:04 PM

FYI: Same is possible with the AK Motion Data Display.

Dutch Devotion · 08-21-2020, 03:29 PM

Quote:

Originally Posted by Westerwälder

FYI: Same is possible with the AK Motion Data Display.

I can confirm that you can turn off the burbles with the AK motion on the M2C

wavyyyy · 08-21-2020, 09:52 PM

Yeah, burbles are so ass.

Akzg · 05-24-2021, 03:38 PM

Hey guys. Is it possible to add more burbles/pops on my F40 M135i? Mine is a later build and they have 'mapped out' the overrun and pops and bangs. Only really get them on a start-up. Been searching everywhere online and found this forum! Hopefully it is possible after all!?

Thanks in advanced.

Nicname · 05-24-2021, 03:47 PM

Is there anyway to control the amount of burbles on a 2021? I think they have their time and place and wouldn't mind reducing them without completely eliminating them.
From what I understand, 2021 models are untunable given the ECU right?

Daytona_550 · 05-24-2021, 03:50 PM

Quote:

Originally Posted by Nicname

Is there anyway to control the amount of burbles on a 2021? I think they have their time and place and wouldn't mind reducing them without completely eliminating them.
From what I understand, 2021 models are untunable given the ECU right?

Efficient = Less
Sport = More
Sport+ = Most
Bimmerlink = On/Off

Nicname · 05-24-2021, 03:55 PM

Quote:

Originally Posted by Daytona_550

Quote:

Originally Posted by Nicname

Is there anyway to control the amount of burbles on a 2021? I think they have their time and place and wouldn't mind reducing them without completely eliminating them.
From what I understand, 2021 models are untunable given the ECU right?

Efficient = Less
Sport = More
Sport+ = Most
Bimmerlink = On/Off

Yeah I meant if there was some sort of way to manipulate the amount/percentage within each of those modes. Basically adjust so Sport+ burbles as much as sport to still get the benefits of sport + vs deciding 100% on or off.

Akzg · 06-02-2021, 02:26 AM

Quote:

Originally Posted by Nicname

Yeah I meant if there was some sort of way to manipulate the amount/percentage within each of those modes. Basically adjust so Sport+ burbles as much as sport to still get the benefits of sport + vs deciding 100% on or off.

Also interested in how to do this! Surely must be configurable via esys?

doughboy · 06-02-2021, 04:50 AM

Quote:

Originally Posted by Nicname

Yeah I meant if there was some sort of way to manipulate the amount/percentage within each of those modes. Basically adjust so Sport+ burbles as much as sport to still get the benefits of sport + vs deciding 100% on or off.

I do that with BM3 flashing the DME, but no use if you can't do that.

That way you can fine tune burble intensity and duration independently for each driver mode.

Or just turn them off altogther if you like.

I have them off in efficient and sport and on for sport+ but turn the duration down to 0.2sec and intensity up to 8 so it just gives a nice single "crack" rather than the tedious flatulent rumbling of the standard car.

(K) · 06-02-2021, 10:27 AM

Being able to adjust the length and intensity of the burbles is actually one of the main factors of why I want to be able to tune. Power gains are great and all but adjusting these kinds of settings to my liking, that's more of my bag.

doughboy · 06-02-2021, 10:46 AM

I guess I'm lucky, mines an October 2018 car, never been updated - and never will be - so still fully OBD tunable.

chefczyk · 06-02-2021, 02:14 PM

just turned of P&B through the bimmercode app - way better in my opinion, still has a nice "pop" when under WOT.

07-14-2019, 05:21 AM	#45
SimonBam Private 41 Rep 77 Posts Drives: 2019 M2 Comp Join Date: Apr 2019 Location: Devon, UK iTrader: (0)	Disabled the burbles when I got my catless DP/AA mid pipe, with the Eisenmann exhaust it was just way way too much! I did have them at 0.6 seconds/12 AGG with BM3 and that's where I would stay if I enabled them again.
	Appreciate 0 Quote

07-14-2019, 02:24 PM	#46
maliderosF87 Private 36 Rep 74 Posts Drives: F87 Join Date: Jun 2017 Location: Athens iTrader: (0)	Can you disable the burbles and pops with BM3 if you have the newest ISTEP F020-19-03-530 or later? (March 2019 and onwards) Rear a comment that it locks BM3 from applying any parameters earlier in this thread. Urgently need a response as I have an appointment for ISTEP updating in a few days and while I would obviously prefer both, I need to code out the popcorns
	Appreciate 0 Quote

07-17-2019, 05:41 PM	#48
GoneIn4Secs Banned 1287 Rep 1,675 Posts Drives: BSM F87 LCI (DCT) Join Date: Jun 2018 Location: GTA iTrader: (0)	Flaps closed = no burbles
	Appreciate 0 Quote

08-12-2020, 10:57 AM	#50
Daytona_550 Lieutenant 464 Rep 500 Posts Drives: '20 M2C / '08 550i / '23 330i Join Date: Oct 2019 Location: Daytona Beach iTrader: (0)	Fyi: https://www.bimmerpost.com/forums/sh...php?p=26552775
	Appreciate 0 Quote

08-18-2020, 09:14 AM	#54
No_curebimmer ~Spyder 638 Rep 870 Posts Drives: '19 M2C Hockenheim 6sp Join Date: Oct 2008 Location: Previously on the Bundesautobahn iTrader: (9) Garage List 2019 BMW M2 Competi ... [0.00]	FYI...in a few weeks, look in the app store for an updated version of https://www.bimmerlink.app/. It will have a feature to turn off the burbles (in the beta version that I've been testing it's called "Sound Tuning" - and it consistently worked for me since it was developed last week).
	Appreciate 3 Gizmo 335i371.50 AndrewC198910931.00 Poochie9104.50 Quote

08-18-2020, 03:04 PM	#55
Westerwälder Private 14 Rep 52 Posts Drives: BMW F87 M2c Join Date: Jul 2016 Location: Germany iTrader: (0)	FYI: Same is possible with the AK Motion Data Display.
	Appreciate 0 Quote

08-21-2020, 09:52 PM	#57
wavyyyy Captain 1046 Rep 941 Posts Drives: M2C Join Date: Jul 2016 Location: Queens iTrader: (0) Garage List 2023 bmw m3 6mt [0.00]	Yeah, burbles are so ass.
	Appreciate 0 Quote

05-24-2021, 03:38 PM	#58
Akzg New Member 4 Rep 22 Posts Drives: Bmw M135i Join Date: Apr 2021 Location: Uk iTrader: (0)	Hey guys. Is it possible to add more burbles/pops on my F40 M135i? Mine is a later build and they have 'mapped out' the overrun and pops and bangs. Only really get them on a start-up. Been searching everywhere online and found this forum! Hopefully it is possible after all!? Thanks in advanced.
	Appreciate 0 Quote

05-24-2021, 03:47 PM	#59
Nicname Lieutenant Colonel 351 Rep 1,681 Posts Drives: 2021 M2C Join Date: Oct 2011 Location: NJ iTrader: (4)	Is there anyway to control the amount of burbles on a 2021? I think they have their time and place and wouldn't mind reducing them without completely eliminating them. From what I understand, 2021 models are untunable given the ECU right? __________________ Current: ///M2C G01 X3 xDrive30i Past: ///M2 997.1 Turbo ///M3 E92
	Appreciate 0 Quote

06-02-2021, 10:27 AM	#64
(K) Captain 1278 Rep 837 Posts Drives: '21 M2C 6MT (R.I.P.) Join Date: Jan 2021 Location: Massachusetts, USA iTrader: (6)	Being able to adjust the length and intensity of the burbles is actually one of the main factors of why I want to be able to tune. Power gains are great and all but adjusting these kinds of settings to my liking, that's more of my bag.
	Appreciate 0 Quote

06-02-2021, 10:46 AM	#65
doughboy Major General 1545 Rep 8,970 Posts Drives: 2018 M2 Comp 6MT Join Date: Jan 2009 Location: UK iTrader: (2)	I guess I'm lucky, mines an October 2018 car, never been updated - and never will be - so still fully OBD tunable.
	Appreciate 0 Quote

06-02-2021, 02:14 PM	#66
chefczyk Private First Class 165 Rep 111 Posts Drives: Alfa 4C, Z3MC, S3 Fulvia Join Date: Oct 2019 Location: NoVA iTrader: (0)	just turned of P&B through the bimmercode app - way better in my opinion, still has a nice "pop" when under WOT.
	Appreciate 0 Quote