Exhaust tips

26k · 01-31-2022, 04:28 PM

Quote:

Originally Posted by Economatic

I went with these. https://f87.bimmerpost.com/forums/sh...7&postcount=33

I was concerned about the quality considering they were off eBay and cheaper than most other options but I was pleasantly surprised when they arrived in the mail.

Not sure how the finish will hold up long term or in areas with a lot of salt on the roads. But for the price you can easily spray some high temp paint.

I was looking at these from Ebay as well, from the other thread. What was the install like? Pretty straightforward?

Thanks

SilverScotty · 01-31-2022, 04:56 PM

I picked up the Blue outer Gold inner back in 2020 and they look really good and I get a lot of people commenting on them. Can get an oem style look as well if you don't want to donate your first child for a set as they are a fraction of the oem cost.

There are a lot of pics on the site. Couldn't find any that I took when I installed them. After a few track days the outer tips turned purple from gold. Now I have a two toned look. My neighbors son loves them.

https://x-ph.com/xph-carbon-fiber-ti...set-of-4-tips/

Economatic · 01-31-2022, 05:10 PM

Quote:

Originally Posted by 26k

I was looking at these from Ebay as well, from the other thread. What was the install like? Pretty straightforward?

Thanks

Easy. They slide on just like the OEM ones. The hardest part is getting the OEM ones off and I think these fit on a bit tighter. I didn't have one perfectly centered and wow, it took a lot of force to get it back off.

papa soey · 02-01-2022, 06:25 PM

I went with Mode tips as well. The bigger diameter matches the beefiness of the rear end and those wide hips

https://f87.bimmerpost.com/forums/sh....php?t=1866028

JL1002 · 02-01-2022, 09:17 PM

I have Burger angle cuts in matte black and am very happy with them - they stick out a bit more than stock, are a little wider, and have a very simple/clean/resilient design.

https://burgertuning.com/products/bi...-tips-set-of-4

happyjack · 02-02-2022, 07:10 AM

Quote:

Originally Posted by JL1002

I have Burger angle cuts in matte black and am very happy with them - they stick out a bit more than stock, are a little wider, and have a very simple/clean/resilient design.

https://burgertuning.com/products/bi...-tips-set-of-4

hmmm...i kinda like these. any pics with them on the car? how long have you had them installed and have you seen any corrosion issues?

BigKutta · 02-02-2022, 08:08 AM

Quote:

Originally Posted by JL1002

I have Burger angle cuts in matte black and am very happy with them - they stick out a bit more than stock, are a little wider, and have a very simple/clean/resilient design.

https://burgertuning.com/products/bi...-tips-set-of-4

Quote:

Originally Posted by happyjack

hmmm...i kinda like these. any pics with them on the car? how long have you had them installed and have you seen any corrosion issues?

I agree, these look great. Would love to see pics on the M2. Are they simple to install? Slide right on? Thanks

BigKutta · 02-02-2022, 08:14 AM

Quote:

Originally Posted by happyjack

hmmm...i kinda like these. any pics with them on the car? how long have you had them installed and have you seen any corrosion issues?

While its not on an M2, here are some pics when you scroll down the page. Looks good

https://burgertuning.com/products/bi...-tips-set-of-4

ChrisK · 02-02-2022, 02:33 PM

Quote:

Originally Posted by Economatic

I went with these. https://f87.bimmerpost.com/forums/sh...7&postcount=33

I was concerned about the quality considering they were off eBay and cheaper than most other options but I was pleasantly surprised when they arrived in the mail.

Not sure how the finish will hold up long term or in areas with a lot of salt on the roads. But for the price you can easily spray some high temp paint.

That is my post

Those tips are just as good looking as the day I put them on. Slight bluing on the inside of the tip and they look fantastic!

My best guess is the seller on eBay is the manufacture, and everyone else is reselling them at a profit.

BigKutta · 02-02-2022, 03:20 PM

I just picked up a set of these Burger Motorsport tips from a fellow forum member. Looking forward to installing them once received.

https://burgertuning.com/collections...41429539651758

flybigjet · 02-02-2022, 06:17 PM

Quote:

Originally Posted by BigKutta

I just picked up a set of these Burger Motorsport tips from a fellow forum member. Looking forward to installing them once received.

https://burgertuning.com/collections...41429539651758

Please post up a pic on this thread when you receive-- I'm really curious to see how they look!

TIA

BigKutta · 02-02-2022, 06:42 PM

Quote:

Originally Posted by flybigjet

Please post up a pic on this thread when you receive-- I'm really curious to see how they look!

TIA

Will do. Hopefully the temps will rise a bit so its bearable to be outside for a bit

. I suspect the OEM tips will be a bit of a pain to get off

flybigjet · 02-02-2022, 06:44 PM

Quote:

Originally Posted by BigKutta

Will do. Hopefully the temps will rise a bit so its bearable to be outside for a bit

. I suspect the OEM tips will be a bit of a pain to get off

I used a piece of padded wood-- snuggled it in behind the end of the OEM tip and whacked away on the other end with a shot-peen mallet.

The tips came off no problem at all-- with no damage at all.

YMMV.

happyjack · 02-03-2022, 08:24 AM

Quote:

Originally Posted by BigKutta

I just picked up a set of these Burger Motorsport tips from a fellow forum member. Looking forward to installing them once received.

https://burgertuning.com/collections...41429539651758

definitely want to see pics! i may have to copy you.

JL1002 · 02-04-2022, 09:31 AM

Quote:

Originally Posted by BigKutta

I agree, these look great. Would love to see pics on the M2. Are they simple to install? Slide right on? Thanks

Sorry for the slow follow up, the updated app is awful and I needed to get to a PC.

They are very easy to install though, the tough part is getting the OEM off (I went the hammer and board route).

They have held up great through 1.5 NJ winters. The attached pictures are of their current state. No signs of corrosion whatsoever. They do look a little brown because they're covered in dirt and salt, but that washes right off. I think they're so resilient because they're ceramic.

BigKutta · 02-04-2022, 09:35 AM

JL1002 Thanks, look great! These looked like the most solid of the bunch that I considered, and went for them. These look fairly adjustable in how much you can make them stick out.

JL1002 · 02-04-2022, 10:16 AM

Quote:

Originally Posted by BigKutta

JL1002 Thanks, look great! These looked like the most solid of the bunch that I considered, and went for them. These look fairly adjustable in how much you can make them stick out.

You could slide them out a little farther, but that's as deep as you can get them (unless you cut off the little metal post on the exhaust, which I have seen someone on the forums do)

BigKutta · 02-05-2022, 06:55 PM

Ok, got the tips today. These are awesome and a great fit for the M2C. I haven't installed them yet, but wanted to post some pics of the difference between these and the stock tips. The stock tips are thin and cheap, and these are solid construction and heavy (7lb for all four). Below you'll see the tips on the exhaust on one side for comparison. These are pushed in fully and look great. I'm gonna play around with them tomorrow and see how far I want them to stick out. FYI, I was able to use some brute force wiggling with my hands to get the stock tips off. No hammer and wood required...glad i'm still weight training

. More pics tomorrow after install, but so far very very happy with them

BigKutta · 02-06-2022, 06:48 AM

JL1002 I suspect we dont have the same tips. Mine are not slanted (just noticed that yours are) and certainly dont stick out as much in the most pushed in position. I have the BM straight cut billet tips

BigKutta · 02-06-2022, 03:32 PM

Here are some more pics with all tips installed. Very happy with the look of them and how much more aggressive the back end looks. I have them out a bit and will try them out this way for a week, and may push them back in, but the difference wont be so noticeable

Zuzu · 02-06-2022, 10:10 PM

Mode here as well.. Nice OEM look, only larger.

JL1002 · 02-07-2022, 09:26 AM

Quote:

Originally Posted by BigKutta

JL1002 I suspect we dont have the same tips. Mine are not slanted (just noticed that yours are) and certainly dont stick out as much in the most pushed in position. I have the BM straight cut billet tips

I like those a lot more than mine. I may need to make the switch.

Are they fully ceramic, inside and out? Looks like they are two pieces?

01-31-2022, 04:56 PM	#24
SilverScotty Private First Class 320 Rep 197 Posts Drives: 2020 M2C HS 6MT Join Date: Jul 2019 Location: Nashville, TN iTrader: (0)	I picked up the Blue outer Gold inner back in 2020 and they look really good and I get a lot of people commenting on them. Can get an oem style look as well if you don't want to donate your first child for a set as they are a fraction of the oem cost. There are a lot of pics on the site. Couldn't find any that I took when I installed them. After a few track days the outer tips turned purple from gold. Now I have a two toned look. My neighbors son loves them. https://x-ph.com/xph-carbon-fiber-ti...set-of-4-tips/
	Appreciate 0 Quote

02-01-2022, 06:25 PM	#26
papa soey New Member 16 Rep 19 Posts Drives: 2021 BMW M2 Competition HS, 6M Join Date: Jul 2020 Location: San Francisco iTrader: (0)	I went with Mode tips as well. The bigger diameter matches the beefiness of the rear end and those wide hips https://f87.bimmerpost.com/forums/sh....php?t=1866028 __________________ 2021 M2 Comp \| 6MT \| HS Sold 2011 Audi A5 \| 6MT \| Stāsis \| Avant Garde
	Appreciate 1 BigKutta3906.50 Quote

02-01-2022, 09:17 PM	#27
JL1002 Private First Class 134 Rep 144 Posts Drives: 2020 M2C Join Date: Apr 2016 Location: NJ iTrader: (1)	I have Burger angle cuts in matte black and am very happy with them - they stick out a bit more than stock, are a little wider, and have a very simple/clean/resilient design. https://burgertuning.com/products/bi...-tips-set-of-4
	Appreciate 2 happyjack1657.00 BigKutta3906.50 Quote

02-02-2022, 03:20 PM	#32
BigKutta Brigadier General 3907 Rep 4,048 Posts Drives: 2020 M2C, 2019 330xi, 2017 Q7 Join Date: Jan 2012 Location: Washington DC Burbs iTrader: (1) Garage List 2019 330xi [0.00] 2017 Audi Q7 3.0 [0.00] 2020 M2C [0.00]	I just picked up a set of these Burger Motorsport tips from a fellow forum member. Looking forward to installing them once received. https://burgertuning.com/collections...41429539651758
	Appreciate 2 chris7197334.00 happyjack1657.00 Quote

02-04-2022, 09:35 AM	#38
BigKutta Brigadier General 3907 Rep 4,048 Posts Drives: 2020 M2C, 2019 330xi, 2017 Q7 Join Date: Jan 2012 Location: Washington DC Burbs iTrader: (1) Garage List 2019 330xi [0.00] 2017 Audi Q7 3.0 [0.00] 2020 M2C [0.00]	JL1002 Thanks, look great! These looked like the most solid of the bunch that I considered, and went for them. These look fairly adjustable in how much you can make them stick out.
	Appreciate 0 Quote

02-05-2022, 06:55 PM	#40
BigKutta Brigadier General 3907 Rep 4,048 Posts Drives: 2020 M2C, 2019 330xi, 2017 Q7 Join Date: Jan 2012 Location: Washington DC Burbs iTrader: (1) Garage List 2019 330xi [0.00] 2017 Audi Q7 3.0 [0.00] 2020 M2C [0.00]	Ok, got the tips today. These are awesome and a great fit for the M2C. I haven't installed them yet, but wanted to post some pics of the difference between these and the stock tips. The stock tips are thin and cheap, and these are solid construction and heavy (7lb for all four). Below you'll see the tips on the exhaust on one side for comparison. These are pushed in fully and look great. I'm gonna play around with them tomorrow and see how far I want them to stick out. FYI, I was able to use some brute force wiggling with my hands to get the stock tips off. No hammer and wood required...glad i'm still weight training . More pics tomorrow after install, but so far very very happy with them Attached Images
	Appreciate 2 (K)1278.00 flybigjet6822.00 Quote

02-06-2022, 06:48 AM	#41
BigKutta Brigadier General 3907 Rep 4,048 Posts Drives: 2020 M2C, 2019 330xi, 2017 Q7 Join Date: Jan 2012 Location: Washington DC Burbs iTrader: (1) Garage List 2019 330xi [0.00] 2017 Audi Q7 3.0 [0.00] 2020 M2C [0.00]	JL1002 I suspect we dont have the same tips. Mine are not slanted (just noticed that yours are) and certainly dont stick out as much in the most pushed in position. I have the BM straight cut billet tips
	Appreciate 0 Quote

02-06-2022, 03:32 PM	#42
BigKutta Brigadier General 3907 Rep 4,048 Posts Drives: 2020 M2C, 2019 330xi, 2017 Q7 Join Date: Jan 2012 Location: Washington DC Burbs iTrader: (1) Garage List 2019 330xi [0.00] 2017 Audi Q7 3.0 [0.00] 2020 M2C [0.00]	Here are some more pics with all tips installed. Very happy with the look of them and how much more aggressive the back end looks. I have them out a bit and will try them out this way for a week, and may push them back in, but the difference wont be so noticeable Attached Images
	Appreciate 4 flybigjet6822.00 happyjack1657.00 JL1002133.50 Fellfromdsky124.00 Quote

02-06-2022, 10:10 PM	#43
Zuzu Major General 2816 Rep 7,637 Posts Drives: M2C HS 6MT Join Date: Mar 2008 Location: Sydney Australia iTrader: (0)	Mode here as well.. Nice OEM look, only larger. Attached Images
	Appreciate 2 BigKutta3906.50 marcw584.00 Quote