07-25-2020, 09:01 AM | #1 |
New Member
36
Rep 17
Posts |
437M Wheel repair
Just thought I would share my experience with repairing a 437M wheel.
Caught one of my wheels on a kerb width restrictor last week, much to my annoyance Didn't really want to get the whole thing re-machined so ended up going with a smart repair. Very impressed with the results, almost impossible to tell. If you get really close and know where it is then you can just about see a slight change from the machining grain in the metal but would never notice it if you didn't know it was there. All in all I would say 90-95% as good as new which I am happy with. Ultimately I didn't want to leave it and risk getting water in behind the damaged lacquer so would definitely recommend. Key is to find someone who has experience with these wheels, as the guy I used had done many of the same wheels and had the exact smoked lacquer colour to match it |
Post Reply |
Bookmarks |
|
|