02-13-2020, 04:22 AM | #1 |
First Lieutenant
171
Rep 324
Posts |
Fitment question
I am thinking of going with the following aftermarket setup:
Wheels: Front: 19" diameter, 8.5" width, 33mm offset Back: 19" diameter, 9.5" width, 35mm offset Tires: Front: 245/35R19 Back: 265/35R19 Will there be any fitment issues? Any rubbing or need for spacers, etc.? Appreciate any input! |
02-13-2020, 07:27 AM | #2 |
First Lieutenant
323
Rep 392
Posts |
Those wheels are 1/2" narrower than stock
The front wheels will stick out 10 mm LESS than stock and the rear plane / backspacing is basically the same The rear wheels will stick out the same as stock and logically the backspacing will be 1/2" less than stock The tires are the same as stock they will of course not rub because the diameter is the same and the new wheels fit inside the space of the stock wheels You can look up here https://www.willtheyfit.com/index.ph...8-5&offset2=33 |
Appreciate
1
hz101171.00 |
02-13-2020, 07:43 AM | #3 | |
First Lieutenant
171
Rep 324
Posts |
Quote:
|
|
Appreciate
0
|
02-14-2020, 12:46 PM | #6 |
First Lieutenant
171
Rep 324
Posts |
Getting the Rohana RFX5 wheels:
https://www.fitmentindustries.com/bu...l=M2&trim=Base They should fit without any issues according to Fitment Industries. Will post pictures once I get them mounted! |
Appreciate
0
|
02-15-2020, 01:24 PM | #7 |
First Lieutenant
171
Rep 324
Posts |
|
Appreciate
0
|
02-15-2020, 09:33 PM | #9 |
Major
564
Rep 1,092
Posts |
|
Appreciate
0
|
02-16-2020, 09:11 AM | #11 | |
First Lieutenant
323
Rep 392
Posts |
Quote:
I see they have the same front wheel with +20 offset - that at least puts the outer face of the wheel the same as stock (ok technically 2mm farther out). |
|
Appreciate
0
|
02-16-2020, 09:33 AM | #12 | |
First Lieutenant
171
Rep 324
Posts |
Quote:
|
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|