[Valvetronic Designs]

Originally Posted by drp087

Yea I was hoping for the same, with more details on the few things. I even listed them like this
1. SS vs Ti sounds
2. Pictures or videos of how far the tips can be pushed in
3. Videos of normal low RPM driving

but I guess they just don't have any more content to share.

So I decided to just do it myself! Haha just ordered with Mike@x-ph. Hoping I can get it shipped, installed, and filmed/edited before 11/15 so anyone on the fence can have a better idea.

Anyone else have their order in?

We are excited for you to enjoy! we will be shipping your order today so you can enjoy ASAP🤘

[mike@x-ph.com]

Originally Posted by drp087

Yea I was hoping for the same, with more details on the few things. I even listed them like this
1. SS vs Ti sounds
2. Pictures or videos of how far the tips can be pushed in
3. Videos of normal low RPM driving

but I guess they just don't have any more content to share.

So I decided to just do it myself! Haha just ordered with Mike@x-ph. Hoping I can get it shipped, installed, and filmed/edited before 11/15 so anyone on the fence can have a better idea.

Anyone else have their order in?

Congrats

[Valvetronic Designs]

another video of the stainless setup! sounds absolutely lovely in our opinion 🤌

https://youtu.be/v2uLXarYL5I?si=vFeiKIvHaEkdokBp

[nioh_lbbm2]

You guys finally are utilizing electronic valves. Took long enough. Made no sense that you made the decision to use vacuum values on your precious offerings when the car comes with electronic actuators from the factory.

[mike@x-ph.com]

Originally Posted by MoM2C

Does it come with a resonated option?

Unfortunately it does not

[inTgr8r]

Originally Posted by mike@x-ph.com

Unfortunately it does not

Hi Mike,
You show this Valvetronic EL system with resonators on your web page.

It's very different than the one in this thread.

Thanks!

[cwunch]

Hi, I have seen a video of an opf M2c, removing all system and installing this set. (Without downpipe)

There is no word about CheckEngineLight. Can someone share information? After removing the opf’s, did you get any warning lights?

[kouba]

I am trying to order the titan version via my tuner shop. However, Valvetronic does not react or confirm the order. Does anyone have a similar experience? (I am based in Europe).

[ProtoMonkey]

+1 if there are any CEL issues with this setup.

[mike@x-ph.com]

Originally Posted by ProtoMonkey

+1 if there are any CEL issues with this setup.

you won't get a CEL with any setup that keeps the stock downpipes.

[ProtoMonkey]

Awesome, thank you so much for the info

[maxcbrdriver]

US models don't have an OPF, so no risk of CEL when changing the exhaust from the downpipe back. If you're in Europe and have an OPF, then you will likely get a CEL when the OPF is removed.

[mike@x-ph.com]

Originally Posted by maxcbrdriver

US models don't have an OPF, so no risk of CEL when changing the exhaust from the downpipe back. If you're in Europe and have an OPF, then you will likely get a CEL when the OPF is removed.

Since I'm dealing with US customers the majority of the time, I always forget to mention that Euro customers with OPF cars are different.

In the US, as long as you don't mess with the downpipes, you don't get a check engine light.

OPF cars have another sensor in the midpipe that you also need to worry about.

[AJAXF1]

Originally Posted by inTgr8r

Hi Mike,
You show this Valvetronic EL system with resonators on your web page.

It's very different than the one in this thread.

Thanks!


Attachment 3355974

They have redesigned the system since this image was taken. I have this version and you can tell the difference as the muffler is mounted in a vertical format versus the newer horizontal version. In mine, you still get a bit of a "diaper" but it is much smaller. The updated version is basically unseen.

[doughboy]

Originally Posted by cwunch

Hi, I have seen a video of an opf M2c, removing all system and installing this set. (Without downpipe)

There is no word about CheckEngineLight. Can someone share information? After removing the opf’s, did you get any warning lights?

100% if you remove OPF you will have warning / CEL and limp mode.

[Sultan hamdi]

This thing sounds so gooooooood

[mike@x-ph.com]

Originally Posted by Sultan hamdi

This thing sounds so gooooooood

[ProtoMonkey]

Ordered mine today with Mike@x-ph. Cant wait to install this on the M2C

Thank you Mike!

[mike@x-ph.com]

Originally Posted by ProtoMonkey

Ordered mine today with Mike@x-ph. Cant wait to install this on the M2C

Thank you Mike!

My pleasure, congrats