03-02-2020, 04:34 AM | #1 |
Major General
7314
Rep 7,473
Posts |
VTT crank bolt capture
Just curious to know if anyone has installed the VTT crank bolt capture on their n55 powered m2 just as a precaution. Since the n55 and n54 share the same crank hub as the s55, but are less likely to fail.
I'm probably going to get one soon for my car, but just wanted to know how everyone else is doing.
__________________
Click on the link below to see a compiled list of every review I have ever written:
https://f87.bimmerpost.com/forums/sh...2#post30368242 |
03-03-2020, 04:35 PM | #2 |
Major General
7314
Rep 7,473
Posts |
So I am assuming no one? Well I guess I will be the first then, just hoping the bolt holes line up.
__________________
Click on the link below to see a compiled list of every review I have ever written:
https://f87.bimmerpost.com/forums/sh...2#post30368242 |
Appreciate
0
|
03-03-2020, 05:56 PM | #3 |
Major
450
Rep 1,358
Posts |
I'll probably install just for good measure. Only takes about 4-5 hrs to install. Can be done without removing any coolant or other lines if careful.
Please let us know how it goes. |
Appreciate
0
|
03-03-2020, 06:21 PM | #4 | |
Major General
7314
Rep 7,473
Posts |
Quote:
But sure I'll keep you guys posted. There's also a sale next week incase any of you guys are interested. It's going to be 30% off which is even better than the deal they had on black Friday for the CBC.
__________________
Click on the link below to see a compiled list of every review I have ever written:
https://f87.bimmerpost.com/forums/sh...2#post30368242 |
|
Appreciate
0
|
03-03-2020, 11:21 PM | #5 |
Major General
7314
Rep 7,473
Posts |
I forgot to also mention, the install will be a huge PITA and waste of time if I have to pull the radiator fan, remove the belts, and drop the bottom skid plate just to see the capture not fit. I've had alot of stuff not fit my m2 before but this would be the worst thing to not fit by a long shot.
__________________
Click on the link below to see a compiled list of every review I have ever written:
https://f87.bimmerpost.com/forums/sh...2#post30368242 |
Appreciate
0
|
03-04-2020, 09:08 AM | #7 |
Major General
7314
Rep 7,473
Posts |
Thanks! Yeah I'll try my best to take photos, but generally speaking I never do any install guides because I'm more focused on what I'm doing rather than taking photos and lengthening the whole process. Plus this is in a really cramped area where I'll be doing the install with a mirror, so I'm not sure I can even take photos.
__________________
Click on the link below to see a compiled list of every review I have ever written:
https://f87.bimmerpost.com/forums/sh...2#post30368242 |
Appreciate
0
|
03-10-2020, 11:24 AM | #8 | |
Major
450
Rep 1,358
Posts |
Quote:
|
|
Appreciate
0
|
03-10-2020, 02:13 PM | #9 |
Major General
7314
Rep 7,473
Posts |
It's part of their march tax return sale, code is CBC30 as per their other forum post. Splock was 30% off last week.
__________________
Click on the link below to see a compiled list of every review I have ever written:
https://f87.bimmerpost.com/forums/sh...2#post30368242 |
Appreciate
0
|
03-12-2020, 10:52 AM | #11 |
BimmerPost Supporting Vendor
24358
Rep 191,163
Posts |
Congrats
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/ Phone number 702-494-9435 |
Appreciate
0
|
03-12-2020, 10:56 AM | #12 |
Major General
7314
Rep 7,473
Posts |
No problem.
__________________
Click on the link below to see a compiled list of every review I have ever written:
https://f87.bimmerpost.com/forums/sh...2#post30368242 |
Appreciate
0
|
07-20-2020, 08:04 PM | #13 |
Major General
7314
Rep 7,473
Posts |
Just wanted to update this thread, my buddy with an m4 spun his crank hub and just got a new one put in and really wanted to have the CBC installed at the same time as well to save on labour and bought mine. So I cannot install this as intended, and will likely either wait for it to go on sale again or just for go this part if it isn't on sale since the N55 doesn't suffer from crank hub issues and the CBC was just something for me to fiddle with.
__________________
Click on the link below to see a compiled list of every review I have ever written:
https://f87.bimmerpost.com/forums/sh...2#post30368242 |
Appreciate
1
Robimplicit16.00 |
Post Reply |
Bookmarks |
|
|